米6体育平台手机版

ZHCSIR4Q July 1995 – September 2018 SN54LVCH245A , SN74LVCH245A

PRODUCTION DATA.

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

W|20
J|20
FK|20

散热焊盘机械数据 (封装 | 引脚)

订购信息

6.7 Electrical Characteristics: SN54LVCH245A

over recommended operating free-air temperature range (unless otherwise noted)

PARAMETER		TEST CONDITIONS		V_CC	MIN	TYP⁽¹⁾	MAX	UNIT
V_OH	High-level output voltage	I_OH = –100 µA		2.7 V to 3.6 V	V_CC – 0.2			V
		I_OH = –12 mA		2.7 V	2.2
		I_OH = –12 mA		3 V	2.4
		I_OH = –24 mA		3 V	2.2
V_OL	Low-level output voltage	I_OL = 100 µA		2.7 V to 3.6 V			0.2	V
		I_OL = 12 mA		2.7 V			0.4
		I_OL = 24 mA		3 V			0.55
I_I	Input current	Control inputs: V_I = 0 to 5.5 V		3.6 V			±5	µA
I_I(hold)	Input hold current	V_I = 0.8 V		3 V	75			µA
		V_I = 2 V		3 V	–75
		V_I = 0 to 3.6 V⁽²⁾		3.6 V			±500
I_OZ⁽³⁾	High-impedance state output current	V_O = 0 V or (V_CCto 5.5 V)		2.3 V to 3.6 V			±15	µA
I_CC	Supply current	V_I = V_CC or GND	I_O = 0	3.6 V			10	µA
I_CC	Supply current	3.6 V ≤ V_I ≤ 5.5 V⁽⁴⁾	I_O = 0	3.6 V			10	µA
ΔI_CC	Supply-current change	One input at V_CC – 0.6 V, other inputs at V_CC or GND		2.7 V to 3.6 V			500	µA
C_i	Input capacitance	Control inputs: V_I = V_CC or GND		3.3 V		4	12	pF
C_io	Input and output capacitance	A or B port: V_O = V_CC or GND		3.3 V		5.5	12	pF

(1) All typical values are V_CC = 3.3 V, T_A = 25°C.

(2) The bus-hold maximum dynamic current requirement to switch the input from one state to another state.

(3) For the total leakage current in an I/O port, see the I_I(hold)specification for the input voltage condition 0 V < V_I< V_CC, and the I_OZspecification for the input voltage conditions V_I = 0 V or V_I = V_CC to 5.5 V. A bus-hold current with an input voltage greater than V_CC is negligible.

(4) This only applies when in a disabled state.