Depending on the application, use the minimum configuration in #SLLSEA05359 or standard configuration in #SLLSEA02995.

Figure 8-6 Unregulated Output for Low-Current Loads With Wide Supply Range

Figure 8-7 Regulated Output for Stable Supplies and High Current Loads

The Wurth Electronics Midcom isolation transformers in Table 8-3 are optimized designs for the SN6501, providing high efficiency and small form factor at low-cost.

The 1:1.1 and 1:1.7 turns-ratios are designed for logic applications with wide supply rails and low load currents. These applications operate without LDO, thus achieving further cost-reduction.