米6体育平台手机版

ZHCSUM3C March 2007 – February 2024 SN65C1167E , SN65C1168E

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

PW|16
- MPDS361A
RGY|16
- MPQF115G
NS|16
- MPDS551A

散热焊盘机械数据 (封装 | 引脚)

RGY|16
- QFND040P

订购信息

5.6 Receiver Section Electrical Characteristics

over recommended ranges of common-mode input voltage, supply voltage, and operating free-air temperature
(unless otherwise noted)

PARAMETER			TEST CONDITIONS		MIN	TYP⁽¹⁾	MAX	UNIT
V_IT+	Positive-going input threshold voltage, differential input						0.2	V
V_IT–	Negative-going input threshold voltage, differential input				–0.2⁽²⁾			V
V_hys	Input hysteresis (V_IT+ – V_IT–)					60		mV
V_IK	Input clamp voltage, RE	SN65C1167E	I_I = –18mA				–1.5	V
V_OH	High-level output voltage		V_ID = 200mV,	I_OH = –6mA	3.8	4.2		V
V_OL	Low-level output voltage		V_ID = –200mV,	I_OL = 6mA		0.1	0.3	V
I_OZ	High-impedance state output current	SN65C1167E	V_O = V_CC or GND			±0.5	±5	μA
I_I	Line input current		Other input at 0V	V_I = 10V			1.5	mA
I_I	Line input current		Other input at 0V	V_I = –10V			–2.5	mA
I_I	Enable input current, RE	SN65C1167E	V_I = V_CC or GND				±1	μA
r_I	Input resistance		V_IC = –7V to 7V,	Other input at 0V	4	17		kΩ
I_CC	Supply current (total package)		No load, Enabled	V_I = V_CC or GND		4	6	mA
I_CC	Supply current (total package)		No load, Enabled	V_IH = 2.4V or 0.5V⁽³⁾		5	9	mA

(1) All typical values are at V_CC = 5V and T_A = 25°C.

(2) The algebraic convention, where the less positive (more negative) limit is designated as minimum, is used in this data sheet for common-mode input voltage and threshold voltage levels only.

(3) Refer to TIA/EIA-422-B for exact conditions.