米6体育平台手机版

ZHCSUM3C March 2007 – February 2024 SN65C1167E , SN65C1168E

PRODUCTION DATA

5.5 Driver Section Electrical Characteristics

over recommended supply voltage and operating free-air temperature ranges (unless otherwise noted)

PARAMETER		TEST CONDITIONS			MIN	TYP⁽¹⁾	MAX	UNIT
V_IK	Input clamp voltage	I_I = –18mA					–1.5	V
V_OH	High-level output voltage	V_IH = 2V,	V_IL = 0.8V,	I_OH = –20mA	2.4	3.5		V
V_OL	Low-level output voltage	V_IH = 2V,	V_IL = 0.8V,	I_OL = 20mA		0.2	0.4	V
\|V_OD1\|	Differential output voltage 1	I_O = 0mA			2		6	V
\|V_OD2\|	Differential output voltage 2	R_L = 100Ω,	See Figure 6-1 ⁽²⁾		2	3.7		V
Δ\|V_OD\|	Change in magnitude of differential output voltage	R_L = 100Ω,	See Figure 6-1 ⁽²⁾				±0.4	V
V_OC	Common-mode output voltage	R_L = 100Ω,	See Figure 6-1 ⁽²⁾				±3	V
Δ\|V_OC\|	Change in magnitude of common-mode output voltage	R_L = 100Ω,	See Figure 6-1 ⁽²⁾				±0.4	V
I_O(OFF)	Output current with power off	V_CC = 0V	V_O = 6V				100	μA
I_O(OFF)	Output current with power off	V_CC = 0V	V_O = –0.25V				100	μA
I_OZ	High-impedance-state output current	V_O = 2.5V					20	μA
I_OZ	High-impedance-state output current	V_O = 5V					–20	μA
I_IH	High-level input current	V_I = V_CC or V_IH					1	μA
I_IL	Low-level input current	V_I = GND or V_IL					–1	μA
I_OS	Short-circuit output current	V_O = V_CC or GND⁽³⁾			–30		–150	mA
I_CC	Supply current (total package)	No load, Enabled	V_I = V_CC or GND			4	6	mA
I_CC	Supply current (total package)	No load, Enabled	V_I = 2.4 or 0.5V⁽⁴⁾			5	9	mA
C_i	Input capacitance					6		pF

(1) All typical values are at V_CC = 5V and T_A = 25°C.

(2) Refer to TIA/EIA-422-B for exact conditions.

(3) Not more than one output should be shorted at a time, and the duration of the short circuit should not exceed one second.

(4) This parameter is measured per input, while the other inputs are at V_CC or GND.