米6体育平台手机版

ZHCSK15 July 2019 SN65C1168E-SEP

PRODUCTION DATA.

封装选项

机械数据 (封装 | 引脚)

PW|16
- MPDS361A

散热焊盘机械数据 (封装 | 引脚)

订购信息

6.5 Driver Section Electrical Characteristics

over recommended supply voltage and operating free-air temperature ranges (unless otherwise noted)

PARAMETER		TEST CONDITIONS		MIN	TYP⁽¹⁾	MAX	UNIT
V_IK	Input clamp voltage	I_I = –18 mA				–1.5	V
V_OH	High-level output voltage	V_IH = 2 V, V_IL = 0.8 V, I_OH = –20 mA		2.4	3.5		V
V_OL	Low-level output voltage	V_IH = 2 V, V_IL = 0.8 V, I_OL = 20 mA			0.2	0.4	V
\|V_OD1\|	Differential output voltage 1	I_O = 0 mA		2		6	V
\|V_OD2\|	Differential output voltage 2	R_L = 100 Ω, see Figure 1⁽²⁾		2	3.7		V
Δ\|V_OD\|	Change in magnitude of differential output voltage	R_L = 100 Ω, see Figure 1⁽²⁾		–0.4		0.4	V
V_OC	Common-mode output voltage	R_L = 100 Ω, see Figure 1⁽²⁾		–3		3	V
Δ\|V_OC\|	Change in magnitude of common-mode output voltage	R_L = 100 Ω, see Figure 1⁽²⁾		–0.4		0.4	V
I_O(OFF)	Output current with power off	V_CC = 0 V	V_O = 6 V			100	μA
I_O(OFF)	Output current with power off	V_CC = 0 V	V_O = –0.25 V			100	μA
I_O(OFF)	Output current with power off⁽⁵⁾	V_CC = 0 V	V_O = 6 V			3	mA
I_O(OFF)	Output current with power off⁽⁵⁾	V_CC = 0 V	V_O = –0.25 V			3	mA
I_OZ	High-impedance-state output current	V_O = 2.5 V				20	μA
I_OZ	High-impedance-state output current	V_O = 5 V				–20	μA
I_OZ	High-impedance-state output current⁽⁵⁾	V_O = 2.5 V				2	mA
I_OZ	High-impedance-state output current⁽⁵⁾	V_O = 5 V				–2	mA
I_IH	High-level input current	V_I = V_CC or V_IH				1	μA
I_IL	Low-level input current	V_I = GND or V_IL				–36	μA
I_OS	Short-circuit output current	V_O = V_CC or GND⁽³⁾		–30		–160	mA
I_CC	Supply current (total package)	No load, Enabled	V_I = V_CC or GND		4	6	mA
I_CC	Supply current (total package)	No load, Enabled	V_I = 2.4 or 0.5 V⁽⁴⁾		5	9	mA
I_CC	Supply current (total package)⁽⁵⁾	No load, Enabled	V_I = V_CC or GND			17	mA
I_CC	Supply current (total package)⁽⁵⁾	No load, Enabled	V_I = 2.4 or 0.5 V⁽⁴⁾			16	mA
C_i	Input capacitance				6		pF

(1) All typical values are at V_CC = 5 V and T_A = 25°C.

(2) Refer to TIA/EIA-422-B for exact conditions.

(3) Not more than one output should be shorted at a time, and the duration of the short circuit should not exceed one second.

(4) This parameter is measured per input, while the other inputs are at V_CC or GND.

(5) 25°C only. Post 20-krad(Si) HDR TID using worst case static biasing.