6.1 Absolute Maximum Ratings
over recommended operating free-air temperature range (unless otherwise noted)(1)
|
MIN |
MAX |
UNIT |
| VCC |
Supply voltage(2) |
|
–0.5 |
7 |
V |
| VI |
Input voltage |
Driver, DE, RE |
–0.5 |
7 |
V |
| A or B, Receiver |
–14 |
14 |
| VID |
Differential input voltage(3) |
Receiver |
–14 |
14 |
V |
| VO |
Output voltage |
Driver |
–0.5 |
7 |
V |
| Receiver |
–0.5 |
VCC + 0.5 |
| IIK |
Input clamp current |
Driver, VI < 0 |
|
–20 |
mA |
| IOK |
Output clamp current |
Driver, VO < 0 |
|
–20 |
mA |
| Receiver |
–20 |
20 |
| IO |
Output current |
Driver |
–150 |
150 |
mA |
| Receiver |
–25 |
25 |
| ICC |
Supply current |
|
|
200 |
mA |
|
GND current |
|
|
–200 |
mA |
| TJ |
Operating virtual junction temperature |
|
|
150 |
°C |
| Tstg |
Storage temperature |
|
–65 |
150 |
°C |
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values except differential input voltage are with respect to the network GND.
(3) Differential input voltage is measured at the noninverting terminal, with respect to the inverting terminal.