ZHCSCM6G May 2014 – October 2019 SN65HVD70 , SN65HVD71 , SN65HVD73 , SN65HVD74 , SN65HVD76 , SN65HVD77
PRODUCTION DATA.
- 1 特性
- 2 应用
- 3 说明
- 4 修订历史记录
- 5 Device Comparison Table
- 6 Pin Configuration and Functions
-
7 Specifications
- 7.1 Absolute Maximum Ratings
- 7.2 ESD Ratings
- 7.3 Recommended Operating Conditions
- 7.4 Thermal Information — D Packages
- 7.5 Thermal Information — DGS and DGK Packages
- 7.6 Power Dissipation
- 7.7 Electrical Characteristics
- 7.8 Switching Characteristics — 400 kbps
- 7.9 Switching Characteristics — 20 Mbps
- 7.10 Switching Characteristics — 50 Mbps
- 7.11 Typical Characteristics
- 8 Parameter Measurement Information
- 9 Detailed Description
- 10Application and Implementation
- 11Power Supply Recommendations
- 12Layout
- 13器件和文档支持
- 14机械、封装和可订购信息
封装选项
机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
- D|14
订购信息
8 Parameter Measurement Information
The input generator rate is 100 kbps with 50% duty cycle, than 6-ns rise and fall times, and 50-Ω output impedance.
Figure 15. Measurement of Driver Differential Output Voltage With Common-Mode Load 
Figure 16. Measurement of Driver Differential and Common-Mode Output With RS-485 Load 
Figure 17. Measurement of Driver Differential Output Rise and Fall Times and Propagation Delays 
D at 3 V to test non-inverting output, D at 0 V to test inverting output.
Figure 18. Measurement of Driver Enable and Disable Times with Active-High Output and Pulldown Load 
D at 0 V to test non-inverting output, D at 3 V to test inverting output.
Figure 19. Measurement of Driver Enable and Disable Times with Active-Low Output and Pullup Load 
Figure 20. Measurement of Receiver Output Rise and Fall Times and Propagation Delays 
Figure 21. Measurement of Receiver Enable and Disable Times With Driver Enabled 
Figure 22. Measurement of Receiver Enable Times With Driver Disabled