米6体育平台手机版

SCES596G JULY 2004 – August 2017 SN74AUP1G126

PRODUCTION DATA.

封装选项

机械数据 (封装 | 引脚)

DRY|6
- MPDS221F
DRL|5
- MPDS158F
DSF|6
- MPDS301G
DPW|5
- MPSS088
DCK|5
- MPDS025J
YZP|5
- MXBG018L
YFP|6
- MXBG056R
DBV|5
- MPDS018T

散热焊盘机械数据 (封装 | 引脚)

DRY|6
- QFND138E
DPW|5
- QFND567C

订购信息

6 Specifications

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)⁽¹⁾

			MIN	MAX	UNIT
V_CC	Supply voltage		–0.5	4.6	V
V_I	Input voltage⁽²⁾		–0.5	4.6	V
V_O	Voltage range applied to any output in the high-impedance or power-off state⁽²⁾		–0.5	4.6	V
V_O	Output voltage range in the high or low state⁽²⁾		–0.5	V_CC + 0.5	V
I_IK	Input clamp current	V_I < 0		–50	mA
I_OK	Output clamp current	V_O < 0		–50	mA
I_O	Continuous output current			±20	mA
	Continuous current through V_CC or GND			±50	mA
T_j	Junction Temperature			150	°C
T_stg	Storage temperature		–65	150	°C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.

6.2 ESD Ratings

			VALUE	UNIT
V_(ESD)	Electrostatic discharge	Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001⁽¹⁾	2000	V
V_(ESD)	Electrostatic discharge	Charged-device model (CDM), per JEDEC specification JESD22-C101⁽²⁾	1000	V

(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

6.3 Recommended Operating Conditions

See⁽¹⁾

			MIN	MAX	UNIT
V_CC	Supply voltage		0.8	3.6	V
V_IH	High-level input voltage	V_CC = 0.8 V	V_CC	3.6	V
		V_CC = 1.1 V to 1.95 V	0.65 × V_CC	3.6
		V_CC = 2.3 V to 2.7 V	1.6	3.6
		V_CC = 3 V to 3.6 V	2	3.6
V_IL	Low-level input voltage	V_CC = 0.8 V		0	V
		V_CC = 1.1 V to 1.95 V	0	0.35 × V_CC
		V_CC = 2.3 V to 2.7 V	0	0.7
		V_CC = 3 V to 3.6 V	0	0.9
V_O	Output voltage	Active state	0	V_CC	V
V_O	Output voltage	3-state	0	3.6	V
I_OH	High-level output current	V_CC = 0.8 V		–20	µA
		V_CC = 1.1 V		–1.1	mA
		V_CC = 1.4 V		–1.7
		V_CC = 1.65 V		–1.9
		V_CC = 2.3 V		–3.1
		V_CC = 3 V		–4
I_OL	Low-level output current	V_CC = 0.8 V		20	µA
		V_CC = 1.1 V		1.1	mA
		V_CC = 1.4 V		1.7
		V_CC = 1.65 V		1.9
		V_CC = 2.3 V		3.1
		V_CC = 3 V		4
Δt/Δv	Input transition rise or fall rate	V_CC = 0.8 V to 3.6 V		200	ns/V
T_A	Operating free-air temperature		–40	85	°C

(1) All unused inputs of the device must be held at V_CC or GND to assure proper device operation. See Implications of Slow of Floating CMOS Inputs.

6.4 Thermal Information

THERMAL METRIC⁽¹⁾		SN74AUP1G126								UNIT
		DRL (SOT-5X3)	DBV (SOT-23)	DCK (SC70)	DRY (SON)	DSF (SON)	DPW (X2SON)	YFP (DSBGA)	YZP (DSBGA)
		5 PINS	5 PINS	5 PINS	6 PINS	6 PINS	5 PINS	6 PINS	5 PINS
R_θJA	Junction-to-ambient thermal resistance	295.1	230.5	303.6	342.1	377.1	504.3	125.4	146.2	°C/W
R_θJC(top)	Junction-to-case (top) thermal resistance	131.0	172.7	203.8	233.1	187.7	234.9	1.9	1.4	°C/W
R_θJB	Junction-to-board thermal resistance	143.9	62.2	100.9	206.7	236.6	370.3	37.2	39.3	°C/W
ψ_JT	Junction-to-top characterization parameter	14.7	49.3	76.1	63.4	29.0	44.5	0.5	0.7	°C/W
ψ_JB	Junction-to-board characterization parameter	144.4	61.6	99.3	206.7	236.3	369.7	37.5	39.8	°C/W
R_θJC(bot)	Junction-to-case (bottom) thermal resistance	N/A	N/A	N/A	N/A	N/A	165.2	N/A	N/A	°C/W

(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report.

6.5 Electrical Characteristics

over recommended operating free-air temperature range (unless otherwise noted)

PARAMETER		TEST CONDITIONS		V_CC	MIN	TYP	MAX	UNIT
V_OH		I_OH = –20 µA	T_A = 25°C	0.8 V to 3.6 V	V_CC – 0.1			V
		I_OH = –20 µA	T_A = –40°C to +85°C	0.8 V to 3.6 V	V_CC – 0.1
		I_OH = –1.1 mA	T_A = 25°C	1.1 V	0.75 × V_CC
		I_OH = –1.1 mA	T_A = –40°C to +85°C	1.1 V	0.7 × V_CC
		I_OH = –1.7 mA	T_A = 25°C	1.4 V	1.11
		I_OH = –1.7 mA	T_A = –40°C to +85°C	1.4 V	1.03
		I_OH = –1.9 mA	T_A = 25°C	1.65 V	1.32
		I_OH = –1.9 mA	T_A = –40°C to +85°C	1.65 V	1.3
		I_OH = –2.3 mA	T_A = 25°C	2.3 V	2.05
		I_OH = –2.3 mA	T_A = –40°C to +85°C		1.97
		I_OH = –3.1 mA	T_A = 25°C		1.9
		I_OH = –3.1 mA	T_A = –40°C to +85°C		1.85
		I_OH = –2.7 mA	T_A = 25°C	3 V	2.72
		I_OH = –2.7 mA	T_A = –40°C to +85°C		2.67
		I_OH = –4 mA	T_A = 25°C		2.6
		I_OH = –4 mA	T_A = –40°C to +85°C		2.55
V_OL		I_OL = 20 µA	T_A = 25°C	0.8 V to 3.6 V			0.1	V
		I_OL = 20 µA	T_A = –40°C to +85°C	0.8 V to 3.6 V			0.1
		I_OL = 1.1 mA	T_A = 25°C	1.1 V			0.3 × V_CC
		I_OL = 1.1 mA	T_A = –40°C to +85°C	1.1 V			0.3 × V_CC
		I_OL = 1.7 mA	T_A = 25°C	1.4 V			0.31
		I_OL = 1.7 mA	T_A = –40°C to +85°C	1.4 V			0.37
		I_OL = 1.9 mA	T_A = 25°C	1.65 V			0.31
		I_OL = 1.9 mA	T_A = –40°C to +85°C	1.65 V			0.35
		I_OL = 2.3 mA	T_A = 25°C	2.3 V			0.31
		I_OL = 2.3 mA	T_A = –40°C to +85°C				0.33
		I_OL = 3.1 mA	T_A = 25°C				0.44
		I_OL = 3.1 mA	T_A = –40°C to +85°C				0.45
		I_OL = 2.7 mA	T_A = 25°C	3 V			0.31
		I_OL = 2.7 mA	T_A = –40°C to +85°C				0.33
		I_OL = 4 mA	T_A = 25°C				0.44
		I_OL = 4 mA	T_A = –40°C to +85°C				0.45
I_I	A or OE input	V_I = GND to 3.6 V	T_A = 25°C	0 V to 3.6 V			0.1	µA
I_I	A or OE input	V_I = GND to 3.6 V	T_A = –40°C to +85°C	0 V to 3.6 V			0.5	µA
I_off		V_I or V_O = 0 V to 3.6 V	T_A = 25°C	0 V			0.2	µA
I_off		V_I or V_O = 0 V to 3.6 V	T_A = –40°C to +85°C	0 V			0.6	µA
ΔI_off		V_I or V_O = 0 V to 3.6 V	T_A = 25°C	0 V to 0.2 V			0.2	µA
ΔI_off		V_I or V_O = 0 V to 3.6 V	T_A = –40°C to +85°C	0 V to 0.2 V			0.6	µA
I_OZ		V_O = V_CC or GND, T_A = –40°C to +85°C		3.6 V			0.5	µA
I_CC		V_I = GND or (V_CC to 3.6 V), OE = GND, I_O = 0	T_A = 25°C	0.8 V to 3.6 V			0.5	µA
I_CC		V_I = GND or (V_CC to 3.6 V), OE = GND, I_O = 0	T_A = –40°C to +85°C	0.8 V to 3.6 V			0.9	µA
ΔI_CC	A input	V_I = V_CC – 0.6 V⁽¹⁾, I_O = 0	T_A = 25°C	3.3 V			40	µA
	A input		T_A = –40°C to +85°C				50
	OE input		T_A = 25°C				110
	OE input		T_A = –40°C to +85°C				120
	All inputs	V_I = GND to 3.6 V, OE = V_CC ⁽²⁾ , T_A = 25°C or T_A = –40°C to +85°C		0.8 V to 3.6 V			0
C_i		V_I = V_CC or GND, T_A = 25°C		0 V		1.5		pF
C_i		V_I = V_CC or GND, T_A = 25°C		3.6 V		1.5		pF
C_o		V_O = V_CC or GND, T_A = 25°C		3.6 V		3		pF

(1) One input at V_CC – 0.6 V, other input at V_CC or GND

(2) To show I_CC is very low when the input-disable feature is enabled

6.6 Switching Characteristics: C_L = 5 pF

over recommended operating free-air temperature range, C_L = 5 pF (unless otherwise noted) (see Figure 2 and Figure 3)

PARAMETER	FROM (INPUT)	TO (OUTPUT)	TEST CONDITIONS		MIN	TYP	MAX	UNIT
t_pd	A	Y	V_CC = 0.8 V	T_A = 25°C		18.1		ns
			V_CC = 1.2 V ± 0.1 V	T_A = 25°C	4.3	7.4	12.6
			V_CC = 1.2 V ± 0.1 V	T_A = –40°C to +85°C	2.7		15.3
			V_CC = 1.5 V ± 0.1 V	T_A = 25°C	3.3	5.2	8.5
			V_CC = 1.5 V ± 0.1 V	T_A = –40°C to +85°C	1		10.2
			V_CC = 1.8 V ± 0.15 V	T_A = 25°C	2.6	4.1	6.8
			V_CC = 1.8 V ± 0.15 V	T_A = –40°C to +85°C	1.3		8.3
			V_CC = 2.5 V ± 0.2 V	T_A = 25°C	2	2.9	4.7
			V_CC = 2.5 V ± 0.2 V	T_A = –40°C to +85°C	1.1		5.8
			V_CC = 3.3 V ± 0.3 V	T_A = 25°C	1.7	2.4	3.8
			V_CC = 3.3 V ± 0.3 V	T_A = –40°C to +85°C	1		4.6
t_en	OE	Y	V_CC = 0.8 V	T_A = 25°C		19.1		ns
			V_CC = 1.2 V ± 0.1 V	T_A = 25°C	5.1	9.3	15.9
			V_CC = 1.2 V ± 0.1 V	T_A = –40°C to +85°C	3.6		19.2
			V_CC = 1.5 V ± 0.1 V	T_A = 25°C	4.1	6.6	10.5
			V_CC = 1.5 V ± 0.1 V	T_A = –40°C to +85°C	2.5		12.7
			V_CC = 1.8 V ± 0.15 V	T_A = 25°C	3.2	5.3	8.7
			V_CC = 1.8 V ± 0.15 V	T_A = –40°C to +85°C	2.1		10.3
			V_CC = 2.5 V ± 0.2 V	T_A = 25°C	2.5	3.8	6
			V_CC = 2.5 V ± 0.2 V	T_A = –40°C to +85°C	1.6		7.2
			V_CC = 3.3 V ± 0.3 V	T_A = 25°C	2.1	3.2	4.9
			V_CC = 3.3 V ± 0.3 V	T_A = –40°C to +85°C	1.4		5.9
t_dis	OE	Y	V_CC = 0.8 V	T_A = 25°C		12.1		ns
			V_CC = 1.2 V ± 0.1 V	T_A = 25°C	2.4	4.1	6.9
			V_CC = 1.2 V ± 0.1 V	T_A = –40°C to +85°C	2.2		7.7
			V_CC = 1.5 V ± 0.1 V	T_A = 25°C	1.8	2.9	4.5
			V_CC = 1.5 V ± 0.1 V	T_A = –40°C to +85°C	1.7		5.1
			V_CC = 1.8 V ± 0.15 V	T_A = 25°C	1	2.9	4.3
			V_CC = 1.8 V ± 0.15 V	T_A = –40°C to +85°C	1.5		4.7
			V_CC = 2.5 V ± 0.2 V	T_A = 25°C	1	1.8	2.7
			V_CC = 2.5 V ± 0.2 V	T_A = –40°C to +85°C	1		3.3
			V_CC = 3.3 V ± 0.3 V	T_A = 25°C	1.2	2.2	3.2
			V_CC = 3.3 V ± 0.3 V	T_A = –40°C to +85°C	1.1		4

6.7 Switching Characteristics: C_L = 10 pF

over recommended operating free-air temperature range, C_L = 10 pF (unless otherwise noted) (see Figure 2 and Figure 3)

PARAMETER	FROM (INPUT)	TO (OUTPUT)	TEST CONDITIONS		MIN	TYP	MAX	UNIT
t_pd	A or B	Y	V_CC = 0.8 V	T_A = 25°C		20.5	13.7	ns
			V_CC = 1.2 V ± 0.1 V	T_A = 25°C	4.6	8.4	9.3
			V_CC = 1.2 V ± 0.1 V	T_A = –40°C to +85°C	3.6		16.6
			V_CC = 1.5 V ± 0.1 V	T_A = 25°C	3.5	5.9	7.5
			V_CC = 1.5 V ± 0.1 V	T_A = –40°C to +85°C	2.4		11.1
			V_CC = 1.8 V ± 0.15 V	T_A = 25°C	3.9	4.7	5.3
			V_CC = 1.8 V ± 0.15 V	T_A = –40°C to +85°C	1.3		9.1
			V_CC = 2.5 V ± 0.2 V	T_A = 25°C	2.3	3.4	4.3
			V_CC = 2.5 V ± 0.2 V	T_A = –40°C to +85°C	1.6		6.4
			V_CC = 3.3 V ± 0.3 V	T_A = 25°C	2.1	2.8
			V_CC = 3.3 V ± 0.3 V	T_A = –40°C to +85°C	1.4		5.2
t_en	OE	Y	V_CC = 0.8 V	T_A = 25°C		21.8	16.8	ns
			V_CC = 1.2 V ± 0.1 V	T_A = 25°C	4.9	10.2	11.2
			V_CC = 1.2 V ± 0.1 V	T_A = –40°C to +85°C	4.4		20.2
			V_CC = 1.5 V ± 0.1 V	T_A = 25°C	3.9	7.3	9.2
			V_CC = 1.5 V ± 0.1 V	T_A = –40°C to +85°C	3.3		13.5
			V_CC = 1.8 V ± 0.15 V	T_A = 25°C	3.4	5.8	6.4
			V_CC = 1.8 V ± 0.15 V	T_A = –40°C to +85°C	2.7		11
			V_CC = 2.5 V ± 0.2 V	T_A = 25°C	2.5	4.3	5.4
			V_CC = 2.5 V ± 0.2 V	T_A = –40°C to +85°C	2.1		7.8
			V_CC = 3.3 V ± 0.3 V	T_A = 25°C	2.1	3.7
			V_CC = 3.3 V ± 0.3 V	T_A = –40°C to +85°C	1.9		6.4
t_dis	OE	Y	V_CC = 0.8 V	T_A = 25°C		13		ns
			V_CC = 1.2 V ± 0.1 V	T_A = 25°C	3.8	6.6	11.7
			V_CC = 1.2 V ± 0.1 V	T_A = –40°C to +85°C	1.2		14
			V_CC = 1.5 V ± 0.1 V	T_A = 25°C	2.2	4.7	7.9
			V_CC = 1.5 V ± 0.1 V	T_A = –40°C to +85°C	1.3		9.3
			V_CC = 1.8 V ± 0.15 V	T_A = 25°C	2.4	4.4	6.4
			V_CC = 1.8 V ± 0.15 V	T_A = –40°C to +85°C	2.2		7.5
			V_CC = 2.5 V ± 0.2 V	T_A = 25°C	1.3	3.1	4.9
			V_CC = 2.5 V ± 0.2 V	T_A = –40°C to +85°C	1.2		5.4
			V_CC = 3.3 V ± 0.3 V	T_A = 25°C	1.9	3.4	5
			V_CC = 3.3 V ± 0.3 V	T_A = –40°C to +85°C	1.9		5.6

6.8 Switching Characteristics: C_L = 15 pF

over recommended operating free-air temperature range, C_L = 15 pF (unless otherwise noted) (see Figure 2 and Figure 3)

PARAMETER	FROM (INPUT)	TO (OUTPUT)	TEST CONDITIONS		MIN	TYP	MAX	UNIT
t_pd	A or B	Y	V_CC = 0.8 V	T_A = 25°C		22.5		ns
			V_CC = 1.2 V ± 0.1 V	T_A = 25°C	5.8	9.3	15.1
			V_CC = 1.2 V ± 0.1 V	T_A = –40°C to +85°C	4.3		17.9
			V_CC = 1.5 V ± 0.1 V	T_A = 25°C	4.4	6.6	10.2
			V_CC = 1.5 V ± 0.1 V	T_A = –40°C to +85°C	3		12.1
			V_CC = 1.8 V ± 0.15 V	T_A = 25°C	3.5	5.3	8.3
			V_CC = 1.8 V ± 0.15 V	T_A = –40°C to +85°C	2.3		9.9
			V_CC = 2.5 V ± 0.2 V	T_A = 25°C	2.7	3.9	5.8
			V_CC = 2.5 V ± 0.2 V	T_A = –40°C to +85°C	1.9		7
			V_CC = 3.3 V ± 0.3 V	T_A = 25°C	2.4	3.2	4.7
			V_CC = 3.3 V ± 0.3 V	T_A = –40°C to +85°C	1.8		5.7
t_en	OE	Y	V_CC = 0.8 V	T_A = 25°C		25.2		ns
			V_CC = 1.2 V ± 0.1 V	T_A = 25°C	7	11.3	18.1
			V_CC = 1.2 V ± 0.1 V	T_A = –40°C to +85°C	5.4		21.4
			V_CC = 1.5 V ± 0.1 V	T_A = 25°C	5.5	8.1	12.2
			V_CC = 1.5 V ± 0.1 V	T_A = –40°C to +85°C	4.1		14.5
			V_CC = 1.8 V ± 0.15 V	T_A = 25°C	4.3	6.5	10.1
			V_CC = 1.8 V ± 0.15 V	T_A = –40°C to +85°C	3.3		12
			V_CC = 2.5 V ± 0.2 V	T_A = 25°C	3.4	4.8	7.1
			V_CC = 2.5 V ± 0.2 V	T_A = –40°C to +85°C	2.6		8.4
			V_CC = 3.3 V ± 0.3 V	T_A = 25°C	2.9	4.1	5.9
			V_CC = 3.3 V ± 0.3 V	T_A = –40°C to +85°C	2.3		6.9
t_dis	OE	Y	V_CC = 0.8 V	T_A = 25°C		14		ns
			V_CC = 1.2 V ± 0.1 V	T_A = 25°C	3.7	5.8	8.2
			V_CC = 1.2 V ± 0.1 V	T_A = –40°C to +85°C	3.3		11
			V_CC = 1.5 V ± 0.1 V	T_A = 25°C	5.5	3.9	5.9
			V_CC = 1.5 V ± 0.1 V	T_A = –40°C to +85°C	2.1		8
			V_CC = 1.8 V ± 0.15 V	T_A = 25°C	3.3	4.5	6.6
			V_CC = 1.8 V ± 0.15 V	T_A = –40°C to +85°C	2.9		7.4
			V_CC = 2.5 V ± 0.2 V	T_A = 25°C	2.3	3.2	4.3
			V_CC = 2.5 V ± 0.2 V	T_A = –40°C to +85°C	1.8		5.1
			V_CC = 3.3 V ± 0.3 V	T_A = 25°C	2.4	4.8	6.2
			V_CC = 3.3 V ± 0.3 V	T_A = –40°C to +85°C	3.1		6.7

6.9 Switching Characteristics: C_L = 30 pF

over recommended operating free-air temperature range, C_L = 30 pF (unless otherwise noted) (see Figure 2 and Figure 3)

PARAMETER	FROM (INPUT)	TO (OUTPUT)	TEST CONDITIONS		MIN	TYP	MAX	UNIT
t_pd	A or B	Y	V_CC = 0.8 V	T_A = 25°C		29		ns
			V_CC = 1.2 V ± 0.1 V	T_A = 25°C	7.4	12	18.7
			V_CC = 1.2 V ± 0.1 V	T_A = –40°C to +85°C	6.6		21.4
			V_CC = 1.5 V ± 0.1 V	T_A = 25°C	5.7	8.6	12.5
			V_CC = 1.5 V ± 0.1 V	T_A = –40°C to +85°C	4.9		14.7
			V_CC = 1.8 V ± 0.15 V	T_A = 25°C	4.8	6.9	10.1
			V_CC = 1.8 V ± 0.15 V	T_A = –40°C to +85°C	3.1		12
			V_CC = 2.5 V ± 0.2 V	T_A = 25°C	3.9	5.1	7.2
			V_CC = 2.5 V ± 0.2 V	T_A = –40°C to +85°C	3.3		8.7
			V_CC = 3.3 V ± 0.3 V	T_A = 25°C	3.5	4.8	6
			V_CC = 3.3 V ± 0.3 V	T_A = –40°C to +85°C	3		7
t_en	OE	Y	V_CC = 0.8 V	T_A = 25°C		33.4		ns
			V_CC = 1.2 V ± 0.1 V	T_A = 25°C	8.8	14.1	21.8
			V_CC = 1.2 V ± 0.1 V	T_A = –40°C to +85°C	7.4		25.5
			V_CC = 1.5 V ± 0.1 V	T_A = 25°C	6.9	10.1	14.6
			V_CC = 1.5 V ± 0.1 V	T_A = –40°C to +85°C	5.6		17.4
			V_CC = 1.8 V ± 0.15 V	T_A = 25°C	5.6	8.1	12
			V_CC = 1.8 V ± 0.15 V	T_A = –40°C to +85°C	4.7		14.1
			V_CC = 2.5 V ± 0.2 V	T_A = 25°C	4.3	6.1	8.5
			V_CC = 2.5 V ± 0.2 V	T_A = –40°C to +85°C	3.8		10
			V_CC = 3.3 V ± 0.3 V	T_A = 25°C	3.7	5.2	7.1
			V_CC = 3.3 V ± 0.3 V	T_A = –40°C to +85°C	3.4		8.3
t_dis	OE	Y	V_CC = 0.8 V	T_A = 25°C		17.7		ns
			V_CC = 1.2 V ± 0.1 V	T_A = 25°C	5.8	10	16
			V_CC = 1.2 V ± 0.1 V	T_A = –40°C to +85°C	3.7		16
			V_CC = 1.5 V ± 0.1 V	T_A = 25°C	5.7	7.7	10.9
			V_CC = 1.5 V ± 0.1 V	T_A = –40°C to +85°C	1		10.7
			V_CC = 1.8 V ± 0.15 V	T_A = 25°C	4.5	7.7	9.8
			V_CC = 1.8 V ± 0.15 V	T_A = –40°C to +85°C	4.4		12.5
			V_CC = 2.5 V ± 0.2 V	T_A = 25°C	3.9	5.6	7.4
			V_CC = 2.5 V ± 0.2 V	T_A = –40°C to +85°C	3.2		9
			V_CC = 3.3 V ± 0.3 V	T_A = 25°C	3.3	8.4	10.7
			V_CC = 3.3 V ± 0.3 V	T_A = –40°C to +85°C	6.6		10.8

6.10 Operating Characteristics

T_A = 25°C

PARAMETER			TEST CONDITIONS	V_CC	TYP	UNIT
C_pd	Power dissipation capacitance	Output enabled	f = 10 MHz	0.8 V	3.8	pF
				1.2 V ± 0.1 V	3.7
				1.5 V ±0.1 V	3.7
				1.8 V ± 0.15 V	3.7
				2.5 V ± 0.2 V	3.9
				3.3 V ± 0.3 V	4
		Output disabled	f = 10 MHz	0.8 V	0
				1.2 V ± 0.1 V	0
				1.5 V ±0.1 V	0
				1.8 V ± 0.15 V	0
				2.5 V ± 0.2 V	0
				2.5 V ± 0.2 V	0
				3.3 V ± 0.3 V	0

6.11 Typical Characteristics

Figure 1. Propagation Delay vs. Supply Voltage and Load Capacitance