SCES644D MARCH 2006 – December 2015 SN74AUP1G74
PRODUCTION DATA.
The power supply can be any voltage between the minimum and maximum supply voltage rating located in Recommended Operating Conditions.
Each VCC pin must have a good bypass capacitor to prevent power disturbance. For devices with a single supply, TI recommends a 0.1-μF capacitor, and if there are multiple VCC pins, then TI recommends a 0.01-μF or
0.022-μF capacitor for each power pin. It is ok to parallel multiple bypass caps to reject different frequencies of noise. 0.1-μF and 1-μF capacitors are commonly used in parallel. The bypass capacitor must be installed as close to the power pin as possible for best results.