米6体育平台手机版

ZHCSMK1H February 2008 – March 2024 SN74AVC4T774

PRODUCTION DATA

6.1 Load Circuit and Voltage Waveforms

Unless otherwise noted, all input pulses are supplied by generators having the following characteristics:

A. C_L includes probe and jig capacitance.

Figure 6-1 Load Circuit

Table 6-1 Load Circuit Parameters

Table 6-2 Load Circuit Conditions

V_CCO	R_L	C_L	V_TP
1.2 V ± 0.1 V	2 kΩ	15 pF	0.1 V
1.5 V ± 0.1 V	2 kΩ	15 pF	0.1 V
1.8 V ± 0.15 V	2 kΩ	15 pF	0.15 V
2.5 V ± 0.2 V	2 kΩ	15 pF	0.15 V
3.3 V ± 0.3 V	2 kΩ	15 pF	0.3 V

V_CCI is the V_CC associated with the input port.
V_CCO is the V_CC associated with the output port.
V_OH and V_OL are typical output voltage levels that occur with specified R_L, C_L, and S₁.
t_PLH and t_PHL are the same as t_pd.
The outputs are measured one at a time, with one transition per measurement.

Figure 6-2 Propagation Delay

V_CCI is the supply pin associated with the input port.
V_OH and V_OL are typical output voltage levels that occur with specified R_L, C_L, and S₁.

Figure 6-3 Input Transition Rise and Fall Rate

A. Output waveform on the condition that input is driven to a valid Logic Low.

B. Output waveform on the condition that input is driven to a valid Logic High.

C. V_CCO is the supply pin associated with the output port.

D. V_OH and V_OL are typical output voltage levels with specified R_L, C_L, and S₁.

E. t_PLZ and t_PHZ are the same as t_dis.

F. t_PZL and t_PZH are the same as t_en.

Figure 6-4 Enable Time And Disable Time