米6体育平台手机版

ZHCSR32A September 2004 – December 2022 SN74CBT3383C

PRODUCTION DATA

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

DBQ|24
DW|24
PW|24

散热焊盘机械数据 (封装 | 引脚)

订购信息

7.5 Electrical Characteristics

over operating free-air temperature range (unless otherwise noted)⁽¹⁾

PARAMETER		TEST CONDITIONS			TYP⁽²⁾	MAX	UNIT
V_IK	Control inputs	V_CC= 4.5 V,	I_IN= −18 mA			−1.8	V
V_IKU	Data inputs	V_CC= 5 V,	0 mA > I_I≥ −50 mA, V_IN= V_CC or GND,	Switch OFF		−2	V
I_IN	Control inputs	V_CC= 5.5 V,	V_IN= V_CC or GND			±1	mA
IOZ‡⁽³⁾		V_CC= 5.5 V,	V_O= 0 to 5.5 V, V_I= 0,	Switch OFF, VIN= VCC or GND		±10	mA
I_off		V_CC= 0,	V_O= 0 to 5.5 V,	VI= 0		10	mA
I_CC		V_CC= 5.5 V,	I_I/O= 0, V_IN= V_CC or GND,	Switch ON or OFF		3	mA
ΔI_CC⁽⁴⁾	Control inputs	V_CC= 5.5 V,	One input at 3.4 V,	Other inputs at V_CC or GND		2.5	mA
C_in	Control inputs	V_IN= 3 V or 0			3.5		pF
C_io(OFF)		V_I/O= 3 V or 0,	Switch OFF,	V_IN= V_CC or GND	8		pF
C_io(ON)		V_I/O= 3 V or 0,	Switch ON,	V_IN= V_CC or GND	18.5		pF
r_on⁽⁵⁾		V_CC= 4 V, TYP at V_CC= 4 V	V_I= 2.4 V,	I_O= −15 mA	8	12	Ω
		V_CC= 4.5 V	VI= 0	I_O= 64 mA	3	6
			VI= 0	I_O= 30 mA	3	6
			V_I= 2.4 V,	I_O= −15 mA	5	10

(1) V_IN and I_IN erfer to control inptus. V_I, V_O, I_I, and I_O refer to data pins.

(2) All the typical values are at V_CC = 5 V (unless otherwise noted), T_A=25°C.

(3) For I/O ports, the parameter I_OZ includes the input leakage current.

(4) This is the increase in supply current for each input that is at the specified voltage level, rather than V_CC or GND.

(5) Measured by the voltage drop between the A and B terminals at the indicated current through the switch. The lower of the voltages of the two (A or B) terminals determines the ON-state resistance.