6 Parameter Measurement Information

t_pd is the maximum between t_PLH and t_PHL

t_t is the maximum between t_TLH and t_THL

Figure 6-1 Load Circuit

Figure 6-2 Voltage Waveforms
Propagation Delay and Output Transition Times

Figure 6-4 Voltage Waveform
Input Rise and Fall Times

Figure 6-3 Voltage Waveforms
Enable and Disable Times for 3-State Outputs

A. C_L includes probe and test-fixture capacitance.

B. Waveform 1 is for an output with internal conditions such that the output is low except when diabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when diabled by the output control.

C. Phase relationships between waveforms were chosen arbitrarily. All input pulses are supplied by generators having the following charactersitics: PRR ≤ 1 MHz, Z_O = 50 Ω, t_r = 6 ns, t_f = 6 ns.

D. The outputs are measured one at a time with one input transition per measurement.

E. t_PLZ and t_PHZ are the same as t_dis.

F. t_PZL and t_PZH are the same as t_en.