米6体育平台手机版

SDLS021D May 1990 – April 2016 SN74LS07

PRODUCTION DATA.

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

D|14
DB|14
N|14
NS|14

散热焊盘机械数据 (封装 | 引脚)

订购信息

9 Application and Implementation

NOTE

Information in the following applications sections is not part of the TI component specification, and TI does not warrant its accuracy or completeness. TI’s customers are responsible for determining suitability of components for their purposes. Customers should validate and test their design implementation to confirm system functionality.

9.1 Application Information

The SN74LS07 device is a high-drive, open-drain CMOS device that can be used for a multitude of buffer-type functions. It can produce 40 mA of drive current at 5 V. Therefore, this device is ideal for driving multiple inputs. The inputs are 5.25-V tolerant and outputs are 30-V tolerant.

9.2 Typical Application

Multiple channels of the SN74LS07 device can be used to create a positive AND logic function, as shown in Figure 4. Additionally, the SN74LS07 device can be used to drive an LED by sinking up to 40 mA, which may be more than the previous stage can sink.

Figure 4. Typical Application Diagram

9.2.1 Design Requirements

Ensure that the inputs are in a known state as defined by V_IH and V_IL noted in Recommended Operating Conditions, or else the outputs may be in an unknown state.

9.2.2 Detailed Design Procedure

Recommended Input Conditions
- For specified high and low level, see V_IH and V_IL in Recommended Operating Conditions.
- Inputs are overvoltage tolerant allowing them to go as high as 5.25 V.
Recommend Output Conditions
- Load currents must not exceed 40 mA per output.
- Outputs must not be pulled above 30 V.

9.2.3 Application Curve

Figure 5. t_PHL vs Temperature