米6体育平台手机版

ZHCSPC1P February 2002 – February 2022 SN65HVD10 , SN65HVD11 , SN65HVD12 , SN75HVD10 , SN75HVD11 , SN75HVD12

PRODUCTION DATA

7.5 Driver Electrical Characteristics

Over recommended operating conditions unless otherwise noted

PARAMETER			TEST CONDITIONS		MIN	TYP⁽¹⁾	MAX	UNIT
V_IK	Input clamp voltage		I_I = –18 mA		–1.5			V
\|V_OD\|	Differential output voltage⁽²⁾		I_O = 0		2		V_CC	V
			R_L = 54 Ω, See Figure 8-1		1.5
			V_test = –7 V to 12 V, See Figure 8-2		1.5
Δ\|V_OD\|	Change in magnitude of differential output voltage		See Figure 8-1 and Figure 8-2		–0.2		0.2	V
V_OC(PP)	Peak-to-peak common-mode output voltage		See Figure 8-3			400		mV
V_OC(SS)	Steady-state common-mode output voltage				1.4		2.5	V
ΔV_OC(SS)	Change in steady-state common-mode output voltage				–0.05		0.05	V
I_OZ	High-impedance output current		See receiver input currents
I_I	Input current	D			–100		0	μA
I_I	Input current	DE			0		100	μA
I_OS	Short-circuit output current		–7 V ≤ V_O ≤ 12 V		–250		250	mA
C_(OD)	Differential output capacitance		V_OD = 0.4 sin(4E6πt) + 0.5 V, DE at 0 V			16		pF
I_CC	Supply current		RE at V_CC, D and DE at V_CC, No load	Receiver disabled and driver enabled		9	15.5	mA
			RE at V_CC, D at V_CC, DE at 0 V, No load	Receiver disabled and driver disabled (standby)		1	5	μA
			RE at 0 V, D and DE at V_CC, No load	Receiver enabled and driver enabled		9	15.5	mA

(1) All typical values are at 25°C and with a 3.3-V supply.

(2) For T_A > 85°C, V_CC is ±5%.