ZHCSRF7A december   2022  – august 2023 TDA4AL-Q1 , TDA4VE-Q1 , TDA4VL-Q1

PRODUCTION DATA  

  1.   1
  2. 1 特性
  3. 2 应用
  4. 3 说明
    1. 3.1 功能方框图
  5. 4 Revision History
  6. 5 Device Comparison
  7. 6 Terminal Configuration and Functions
    1. 6.1 Pin Diagrams
    2. 6.2 Pin Attributes
      1.      11
      2.      12
    3. 6.3 Signal Descriptions
      1.      14
      2. 6.3.1  ADC
        1. 6.3.1.1 MCU Domain
          1.        17
          2.        18
          3.        19
      3. 6.3.2  DDRSS
        1. 6.3.2.1 MAIN Domain
          1.        22
          2.        23
      4. 6.3.3  GPIO
        1. 6.3.3.1 MAIN Domain
          1.        26
        2. 6.3.3.2 WKUP Domain
          1.        28
      5. 6.3.4  I2C
        1. 6.3.4.1 MAIN Domain
          1.        31
          2.        32
          3.        33
          4.        34
          5.        35
          6.        36
          7.        37
        2. 6.3.4.2 MCU Domain
          1.        39
          2.        40
        3. 6.3.4.3 WKUP Domain
          1.        42
      6. 6.3.5  I3C
        1. 6.3.5.1 MCU Domain
          1.        45
      7. 6.3.6  MCAN
        1. 6.3.6.1 MAIN Domain
          1.        48
          2.        49
          3.        50
          4.        51
          5.        52
          6.        53
          7.        54
          8.        55
          9.        56
          10.        57
          11.        58
          12.        59
          13.        60
          14.        61
          15.        62
          16.        63
          17.        64
          18.        65
        2. 6.3.6.2 MCU Domain
          1.        67
          2.        68
      8. 6.3.7  MCSPI
        1. 6.3.7.1 MAIN Domain
          1.        71
          2.        72
          3.        73
          4.        74
          5.        75
          6.        76
          7.        77
        2. 6.3.7.2 MCU Domain
          1.        79
          2.        80
      9. 6.3.8  UART
        1. 6.3.8.1 MAIN Domain
          1.        83
          2.        84
          3.        85
          4.        86
          5.        87
          6.        88
          7.        89
          8.        90
          9.        91
          10.        92
        2. 6.3.8.2 MCU Domain
          1.        94
        3. 6.3.8.3 WKUP Domain
          1.        96
      10. 6.3.9  MDIO
        1. 6.3.9.1 MAIN Domain
          1.        99
        2. 6.3.9.2 MCU Domain
          1.        101
      11. 6.3.10 CPSW2G
        1. 6.3.10.1 MAIN Domain
          1.        104
        2. 6.3.10.2 MCU Domain
          1.        106
      12. 6.3.11 ECAP
        1. 6.3.11.1 MAIN Domain
          1.        109
          2.        110
          3.        111
      13. 6.3.12 EQEP
        1. 6.3.12.1 MAIN Domain
          1.        114
          2.        115
          3.        116
      14. 6.3.13 EPWM
        1. 6.3.13.1 MAIN Domain
          1.        119
          2.        120
          3.        121
          4.        122
          5.        123
          6.        124
          7.        125
      15. 6.3.14 USB
        1. 6.3.14.1 MAIN Domain
          1.        128
      16. 6.3.15 Display Port
        1. 6.3.15.1 MAIN Domain
          1.        131
      17. 6.3.16 Hyperlink
        1. 6.3.16.1 MAIN Domain
          1.        134
          2.        135
          3.        136
      18. 6.3.17 PCIE
        1. 6.3.17.1 MAIN Domain
          1.        139
      19. 6.3.18 SERDES
        1. 6.3.18.1 MAIN Domain
          1.        142
      20. 6.3.19 DSI
        1. 6.3.19.1 MAIN Domain
          1.        145
          2.        146
      21. 6.3.20 CSI
        1. 6.3.20.1 MAIN Domain
          1.        149
          2.        150
      22. 6.3.21 MCASP
        1. 6.3.21.1 MAIN Domain
          1.        153
          2.        154
          3.        155
          4.        156
          5.        157
      23. 6.3.22 DMTIMER
        1. 6.3.22.1 MAIN Domain
          1.        160
        2. 6.3.22.2 MCU Domain
          1.        162
      24. 6.3.23 CPTS
        1. 6.3.23.1 MAIN Domain
          1.        165
        2. 6.3.23.2 MCU Domain
          1.        167
      25. 6.3.24 DSS
        1. 6.3.24.1 MAIN Domain
          1.        170
      26. 6.3.25 GPMC
        1. 6.3.25.1 MAIN Domain
          1.        173
      27. 6.3.26 MMC
        1. 6.3.26.1 MAIN Domain
          1.        176
          2.        177
      28. 6.3.27 OSPI
        1. 6.3.27.1 MCU Domain
          1.        180
          2.        181
      29. 6.3.28 Hyperbus
        1. 6.3.28.1 MCU Domain
          1.        184
      30. 6.3.29 Emulation and Debug
        1. 6.3.29.1 MAIN Domain
          1.        187
          2.        188
      31. 6.3.30 System and Miscellaneous
        1. 6.3.30.1 Boot Mode configuration
          1.        191
        2. 6.3.30.2 Clock
          1.        193
          2.        194
        3. 6.3.30.3 System
          1.        196
          2.        197
        4. 6.3.30.4 EFUSE
          1.        199
        5. 6.3.30.5 VMON
          1.        201
      32. 6.3.31 Power
        1.       203
    4. 6.4 Connection for Unused Pins
  8. 7 Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings
    3. 7.3  Recommended Operating Conditions
    4. 7.4  Power-On-Hour (POH) Limits
    5. 7.5  Operating Performance Points
    6. 7.6  Electrical Characteristics
      1. 7.6.1  I2C, Open-Drain, Fail-Safe (I2C OD FS) Electrical Characteristics
      2. 7.6.2  Fail-Safe Reset (FS Reset) Electrical Characteristics
      3. 7.6.3  HFOSC/LFOSC Electrical Characteristics
      4. 7.6.4  eMMCPHY Electrical Characteristics
      5. 7.6.5  SDIO Electrical Characteristics
      6. 7.6.6  CSI2/DSI D-PHY Electrical Characteristics
      7. 7.6.7  ADC12B Electrical Characteristics
      8. 7.6.8  LVCMOS Electrical Characteristics
      9. 7.6.9  USB2PHY Electrical Characteristics
      10. 7.6.10 SerDes 2-L-PHY/4-L-PHY Electrical Characteristics
      11. 7.6.11 UFS M-PHY Electrical Characteristics
      12. 7.6.12 eDP/DP AUX-PHY Electrical Characteristics
      13. 7.6.13 DDR0 Electrical Characteristics
    7. 7.7  VPP Specifications for One-Time Programmable (OTP) eFuses
      1. 7.7.1 Recommended Operating Conditions for OTP eFuse Programming
      2. 7.7.2 Hardware Requirements
      3. 7.7.3 Programming Sequence
      4. 7.7.4 Impact to Your Hardware Warranty
    8. 7.8  Thermal Resistance Characteristics
      1. 7.8.1 Thermal Resistance Characteristics for ALZ Package
    9. 7.9  Temperature Sensor Characteristics
    10. 7.10 Timing and Switching Characteristics
      1. 7.10.1 Timing Parameters and Information
      2. 7.10.2 Power Supply Sequencing
        1. 7.10.2.1 Power Supply Slew Rate Requirement
        2. 7.10.2.2 Combined MCU and Main Domains Power- Up Sequencing
        3. 7.10.2.3 Combined MCU and Main Domains Power- Down Sequencing
        4. 7.10.2.4 Isolated MCU and Main Domains Power- Up Sequencing
        5. 7.10.2.5 Isolated MCU and Main Domains Power- Down Sequencing
        6. 7.10.2.6 Independent MCU and Main Domains, Entry and Exit of MCU Only Sequencing
        7. 7.10.2.7 Independent MCU and Main Domains, Entry and Exit of DDR Retention State
        8. 7.10.2.8 Independent MCU and Main Domains, Entry and Exit of GPIO Retention Sequencing
      3. 7.10.3 System Timing
        1. 7.10.3.1 Reset Timing
        2. 7.10.3.2 Safety Signal Timing
        3. 7.10.3.3 Clock Timing
      4. 7.10.4 Clock Specifications
        1. 7.10.4.1 Input and Output Clocks / Oscillators
          1. 7.10.4.1.1 WKUP_OSC0 Internal Oscillator Clock Source
            1. 7.10.4.1.1.1 Load Capacitance
            2. 7.10.4.1.1.2 Shunt Capacitance
          2. 7.10.4.1.2 WKUP_OSC0 LVCMOS Digital Clock Source
          3. 7.10.4.1.3 Auxiliary OSC1 Internal Oscillator Clock Source
            1. 7.10.4.1.3.1 Load Capacitance
            2. 7.10.4.1.3.2 Shunt Capacitance
          4. 7.10.4.1.4 Auxiliary OSC1 LVCMOS Digital Clock Source
          5. 7.10.4.1.5 Auxiliary OSC1 Not Used
        2. 7.10.4.2 Output Clocks
        3. 7.10.4.3 PLLs
        4. 7.10.4.4 Module and Peripheral Clocks Frequencies
      5. 7.10.5 Peripherals
        1. 7.10.5.1  ATL
          1. 7.10.5.1.1 ATL_PCLK Timing Requirements
          2. 7.10.5.1.2 ATL_AWS[x] Timing Requirements
          3. 7.10.5.1.3 ATL_BWS[x] Timing Requirements
          4. 7.10.5.1.4 ATCLK[x] Switching Characteristics
        2. 7.10.5.2  CPSW2G
          1. 7.10.5.2.1 CPSW2G MDIO Interface Timings
          2. 7.10.5.2.2 CPSW2G RMII Timings
            1. 7.10.5.2.2.1 CPSW2G RMII[x]_REF_CLK Timing Requirements – RMII Mode
            2. 7.10.5.2.2.2 CPSW2G RMII[x]_RXD[1:0], RMII[x]_CRS_DV, and RMII[x]_RX_ER Timing Requirements – RMII Mode
            3. 7.10.5.2.2.3 CPSW2G RMII[x]_TXD[1:0], and RMII[x]_TX_EN Switching Characteristics – RMII Mode
          3. 7.10.5.2.3 CPSW2G RGMII Timings
            1. 7.10.5.2.3.1 RGMII[x]_RXC Timing Requirements – RGMII Mode
            2. 7.10.5.2.3.2 CPSW2G Timing Requirements for RGMII[x]_RD[3:0], and RGMII[x]_RCTL – RGMII Mode
            3. 7.10.5.2.3.3 CPSW2G RGMII[x]_TXC Switching Characteristics – RGMII Mode
            4. 7.10.5.2.3.4 RGMII[x]_TD[3:0], and RGMII[x]_TX_CTL Switching Characteristics – RGMII Mode
        3. 7.10.5.3  CSI-2
        4. 7.10.5.4  DDRSS
        5. 7.10.5.5  DSS
        6. 7.10.5.6  eCAP
          1. 7.10.5.6.1 Timing Requirements for eCAP
          2. 7.10.5.6.2 Switching Characteristics for eCAP
        7. 7.10.5.7  EPWM
          1. 7.10.5.7.1 Timing Requirements for eHRPWM
          2. 7.10.5.7.2 Switching Characteristics for eHRPWM
        8. 7.10.5.8  eQEP
          1. 7.10.5.8.1 Timing Requirements for eQEP
          2. 7.10.5.8.2 Switching Characteristics for eQEP
        9. 7.10.5.9  GPIO
          1. 7.10.5.9.1 GPIO Timing Requirements
          2. 7.10.5.9.2 GPIO Switching Characteristics
        10. 7.10.5.10 GPMC
          1. 7.10.5.10.1 GPMC and NOR Flash — Synchronous Mode
            1. 7.10.5.10.1.1 GPMC and NOR Flash Timing Requirements — Synchronous Mode
            2. 7.10.5.10.1.2 GPMC and NOR Flash Switching Characteristics – Synchronous Mode
          2. 7.10.5.10.2 GPMC and NOR Flash — Asynchronous Mode
            1. 7.10.5.10.2.1 GPMC and NOR Flash Timing Requirements – Asynchronous Mode
            2. 7.10.5.10.2.2 GPMC and NOR Flash Switching Characteristics – Asynchronous Mode
          3. 7.10.5.10.3 GPMC and NAND Flash — Asynchronous Mode
            1. 7.10.5.10.3.1 GPMC and NAND Flash Timing Requirements – Asynchronous Mode
            2. 7.10.5.10.3.2 GPMC and NAND Flash Switching Characteristics – Asynchronous Mode
          4. 7.10.5.10.4 GPMC0 IOSET
        11. 7.10.5.11 HyperBus
          1. 7.10.5.11.1 Timing Requirements for HyperBus
          2. 7.10.5.11.2 HyperBus 166 MHz Switching Characteristics
          3. 7.10.5.11.3 HyperBus 100 MHz Switching Characteristics
        12. 7.10.5.12 I2C
        13. 7.10.5.13 I3C
        14. 7.10.5.14 MCAN
        15. 7.10.5.15 MCASP
        16. 7.10.5.16 MCSPI
          1. 7.10.5.16.1 MCSPI — Controller Mode
          2. 7.10.5.16.2 MCSPI — Peripheral Mode
        17. 7.10.5.17 MMCSD
          1. 7.10.5.17.1 MMC0 - eMMC Interface
            1. 7.10.5.17.1.1 Legacy SDR Mode
            2. 7.10.5.17.1.2 High Speed SDR Mode
            3. 7.10.5.17.1.3 High Speed DDR Mode
            4. 7.10.5.17.1.4 HS200 Mode
            5. 7.10.5.17.1.5 HS400 Mode
          2. 7.10.5.17.2 MMC1/2 - SD/SDIO Interface
            1. 7.10.5.17.2.1 Default Speed Mode
            2. 7.10.5.17.2.2 High Speed Mode
            3. 7.10.5.17.2.3 UHS–I SDR12 Mode
            4. 7.10.5.17.2.4 UHS–I SDR25 Mode
            5. 7.10.5.17.2.5 UHS–I SDR50 Mode
            6. 7.10.5.17.2.6 UHS–I DDR50 Mode
            7. 7.10.5.17.2.7 UHS–I SDR104 Mode
        18. 7.10.5.18 CPTS
          1. 7.10.5.18.1 CPTS Timing Requirements
          2. 7.10.5.18.2 CPTS Switching Characteristics
        19. 7.10.5.19 OSPI
          1. 7.10.5.19.1 OSPI0 PHY Mode
            1. 7.10.5.19.1.1 OSPI With Data Training
              1. 7.10.5.19.1.1.1 OSPI Switching Characteristics – Data Training
            2. 7.10.5.19.1.2 OSPI Without Data Training
              1. 7.10.5.19.1.2.1 OSPI Timing Requirements – SDR Mode
              2. 7.10.5.19.1.2.2 OSPI Switching Characteristics – SDR Mode
              3. 7.10.5.19.1.2.3 OSPI Timing Requirements – DDR Mode
              4. 7.10.5.19.1.2.4 OSPI Switching Characteristics – DDR Mode
          2. 7.10.5.19.2 OSPI0 Tap Mode
            1. 7.10.5.19.2.1 OSPI0 Tap SDR Timing
            2. 7.10.5.19.2.2 OSPI0 Tap DDR Timing
        20. 7.10.5.20 PCIE
        21. 7.10.5.21 Timers
          1. 7.10.5.21.1 Timing Requirements for Timers
          2. 7.10.5.21.2 Switching Characteristics for Timers
        22. 7.10.5.22 UART
          1. 7.10.5.22.1 Timing Requirements for UART
          2. 7.10.5.22.2 UART Switching Characteristics
        23. 7.10.5.23 USB
      6. 7.10.6 Emulation and Debug
        1. 7.10.6.1 Trace
        2. 7.10.6.2 JTAG
          1. 7.10.6.2.1 JTAG Electrical Data and Timing
            1. 7.10.6.2.1.1 JTAG Timing Requirements
            2. 7.10.6.2.1.2 JTAG Switching Characteristics
  9. 8 Applications, Implementation, and Layout
    1. 8.1 Device Connection and Layout Fundamentals
      1. 8.1.1 Power Supply Decoupling and Bulk Capacitors
        1. 8.1.1.1 Power Distribution Network Implementation Guidance
      2. 8.1.2 External Oscillator
      3. 8.1.3 JTAG and EMU
      4. 8.1.4 Reset
      5. 8.1.5 Unused Pins
      6. 8.1.6 Hardware Design Guide for JacintoTM 7 Devices
    2. 8.2 Peripheral- and Interface-Specific Design Information
      1. 8.2.1 LPDDR4 Board Design and Layout Guidelines
      2. 8.2.2 OSPI and QSPI Board Design and Layout Guidelines
        1. 8.2.2.1 No Loopback and Internal Pad Loopback
        2. 8.2.2.2 External Board Loopback
        3. 8.2.2.3 DQS (only available in Octal Flash devices)
      3. 8.2.3 USB VBUS Design Guidelines
      4. 8.2.4 System Power Supply Monitor Design Guidelines using VMON/POK
      5. 8.2.5 High Speed Differential Signal Routing Guidance
      6. 8.2.6 Thermal Solution Guidance
  10. 9 Device and Documentation Support
    1. 9.1 Device Nomenclature
      1. 9.1.1 Standard Package Symbolization
      2. 9.1.2 Device Naming Convention
    2. 9.2 Tools and Software
    3. 9.3 Documentation Support
    4. 9.4 Trademarks
    5. 9.5 支持资源
    6. 9.6 静电放电警告
    7. 9.7 术语表
  11. 10Mechanical, Packaging, and Orderable Information
    1. 10.1 Packaging Information

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • ALZ|770
散热焊盘机械数据 (封装 | 引脚)
订购信息

7.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)
SUPPLY NAME(2)DESCRIPTIONMIN(1)NOMMAX(1)UNIT
VDD_COREBoot/Active voltage for MAIN domain core supply0.76(1)0.80.84(1)V
VDD_MCUBoot/Active voltage for MCUSS core supply0.76(1)0.80.89(1)V
VDD_CPUBoot voltage for CPU core supply, applied at cold power up event 0.76(1)0.80.84(1)V
Active voltage for CPU core supply, after AVS mode enabled in softwareAVS(5)-5%(1)AVS(5)AVS(5)+5%(1)V
VDD_CPU AVS RangeAVS valid voltage range for VDD_CPU0.60.9V
VDD_MCU_WAKE1 Core supply for MCU WAKE function 0.76 0.8 0.89 V
VDD_WAKE0 Core suply for MAIN domain WAKE function 0.76 0.8 0.89 V
VDDA_0P8_DLL_MMC0MMC PLL analog supply0.760.80.84V
VDDAR_COREMain domain RAM supply0.810.850.89V
VDDAR_MCUMCUSS RAM supply0.810.850.89V
VDDAR_CPUCPU RAM supply0.810.850.89V
VDDA_0P8_DSITXDSITX clock supply0.760.80.84V
VDDA_0P8_DSITX_CDSITX clock supply0.760.80.84V
VDDA_0P8_CSIRX0_1CSIRX analog supply low0.760.80.84V
VDDA_0P8_SERDES0_1SERDES0-1 analog supply low0.760.80.84V
VDDA_0P8_SERDES_C0_1SERDES0-1 clock supply0.760.80.84V
VDDA_0P8_USBUSB0-1 0.8v analog supply0.760.80.84V
VDDA_0P8_PLL_DDR0 DDR0 PLL analog supply low 0.76 0.8 0.84 V
VDDA_0P8_PLL_DDR1 DDR1 PLL analog supply low 0.76 0.8 0.84 V
VDDA_1P8_USBUSB0-1 1.8v analog supply1.711.81.89V
VDDA_1P8_DSITXDSITX analog supply high1.711.81.89V
VDDA_1P8_CSIRX0_1CSIRX analog supply high1.711.81.89V
VDDA_1P8_SERDES0_1SERDES0-1 analog supply high1.711.81.89V
VDDA_1P8_SERDES2_4SERDES2-4 analog supply high1.711.81.89V
VDDA_3P3_USBUSB0-1 3.3v analog supply3.143.33.46V
VDDA_MCU_PLLGRP0Analog supply for MCU PLL Group 01.711.81.89V
VDDA_PLLGRP0Analog supply for Main PLL Group 01.711.81.89V
VDDA_PLLGRP1Analog supply for MAIN PLL Group 11.711.81.89V
VDDA_PLLGRP2Analog supply for MAIN PLL Group 21.711.81.89V
VDDA_PLLGRP5Analog supply for MAIN PLL Group 5 (DDR)1.711.81.89V
VDDA_PLLGRP6Analog supply for MAIN PLL Group 61.711.81.89V
VDDA_PLLGRP7 Analog supply for MAIN PLL Group 7 1.71 1.8 1.89 V
VDDA_PLLGRP8 Analog supply for MAIN PLL Group 8 1.71 1.8 1.89 V
VDDA_PLLGRP9 Analog supply for MAIN PLL Group 9 1.71 1.8 1.89 V
VDDA_PLLGRP10 Analog supply for MAIN PLL Group 10 1.71 1.8 1.89 V
VDDA_PLLGRP12 Analog supply for MAIN PLL Group 12 1.71 1.8 1.89 V
VDDA_PLLGRP13 Analog supply for MAIN PLL Group 13 1.71 1.8 1.89 V
VDDA_WKUPOscillator supply for wkup domain1.711.81.89V
VDDA_ADC0ADC analog supply1.711.81.89V
VDDA_ADC1ADC analog supply1.711.81.89V
VDDA_MCU_TEMPAnalog supply for temperature sensor 0 in MCU domain1.711.81.89V
VDDA_POR_WKUPWKUP domain analog supply1.711.81.89V
VDDA_1P8_MLBMLB IO supply (6-pin interface)1.711.81.89V
VDDA_TEMP_0Analog supply for temperature sensor 01.711.81.89V
VDDA_TEMP_1Analog supply for temperature sensor 11.711.81.89V
VDDA_TEMP_2 Analog supply for temperature sensor 2 1.71 1.8 1.89 V
VDDA_TEMP_3 Analog supply for temperature sensor 3 1.71 1.8 1.89 V
VDDA_TEMP_4 Analog supply for temperature sensor 4 1.71 1.8 1.89 V
VDDA_OSC1 Analog supply for HFOSC1 1.71 1.8 1.89 V
VDDA_* Peak to Peak Noise for all VDDA inputs 25 mV
VDDS_DDR(3)DDR inteface power supply1.061.11.15V
VDDS_DDR_C0IO power for DDR0 Memory Clock Bit (MCB) macro1.061.11.15V
VDDS_DDR_C1IO power for DDR1 Memory Clock Bit (MCB) macro1.061.11.15V
VDDS_MMC0MMC0 IO supply1.711.81.89V
VDDSHV0IO supply for main domain general1.8-V operation1.711.81.89V
3.3-V operation3.143.33.46V
VDDSHV0_MCUIO supply MCUSS general IO group, and MCU and Main domain warm reset pins1.8-V operation1.711.81.89V
3.3-V operation3.143.33.46V
VDDSHV1_MCU(6)IO supply for MCUSS IO group 11.8-V operation1.711.81.89V
3.3-V operation3.143.33.46V
VDDSHV2IO supply for main domain IO group 21.8-V operation1.711.81.89V
3.3-V operation3.143.33.46V
VDDSHV2_MCUIO supply for MCUSS IO group 21.8-V operation1.711.81.89V
3.3-V operation3.143.33.46V
VDDSHV5IO supply for main domain IO group 51.8-V operation1.711.81.89V
3.3-V operation3.143.33.46V
USB0_VBUSVoltage range for USB VBUS comparator input0See (7)3.46V
USB0_IDVoltage range for the USB ID inputSee (4)V
VSSGround0V
TJOperating junction temperature rangeAutomotive-40125°C
Extended-40105°C
Commercial090°C
(1) For all VDD* supply inputs, the voltage at the device ball must never be below the MIN voltage or above the MAX voltage for any amount of time. This requirement includes dynamic voltage events such as AC ripple, voltage transients, voltage dips, and so forth. This is required for all supply inputs, but special care should be given to the VDD_CORE, VDD_MCU, and VDD_CPU domains which have higher transient current demand compared to other rails.
(2) Refer to Power-On-Hour (POH) Limits for limitations.
(3) VDDS_DDR is required to still be powered with LPDDR4 voltage ranges, even If DDR interface is unused.
(4) This terminal is connected to analog circuits in the respective USB PHY. The circuit sources a known current while measuring the voltage to determine if the terminal is connected to VSS with a resistance less than 10 Ω or greater than 100 kΩ. The terminal should be connected to ground for USB host operation or open-circuit for USB peripheral operation, and should never be connected to any external voltage source.
(5) The AVS Voltages are device-dependent, voltage domain-dependent, and OPP-dependent. They must be read from the VTM_DEVINFO_VDn. For information about VTM_DEVINFO_VDn Registers address, please refer to Voltage and Thermal Manager section in the device TRM. The power supply should be adjustable over the ranges shown in the VDD_CPU AVS Range entry.
(6) When DDR1 is used concurrently with either OSPI0 or Hyperbus, VDDSHV1_MCU is limited to 1.8V (3.3V mode not supported if DDR1 is used in the system.)
(7) An external resistor divider is required to limit the voltage applied to this device pin. For more information, see USB VBUS Design Guidelines.
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |