米6体育平台手机版

ZHCSNY7 September 2023 THVD1330

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

D|8
- MSOI002K

散热焊盘机械数据 (封装 | 引脚)

订购信息

zhcsny7_oa

6.5 Electrical Characteristics

over operating free-air temperature range, Typical values are at 25 ℃ and 3.3 V supply (unless otherwise noted)

PARAMETER		TEST CONDITIONS			MIN	TYP	MAX	UNIT
Driver
\|V_OD\|	Driver differential output voltage magnitude	R_L= 60 Ω, -7 V ≤ V_test ≤ 12 V, See Figure 6-1			1.5			V
		R_L = 54 Ω, See Figure 6-2			1.5			V
		No load			2		3.6	V
Δ\|V_OD\|	Change in differential output voltage	R_L = 54 Ω, See Figure 6-2			–50		50	mV
V_OC	Common-mode output voltage	R_L = 54 Ω, See Figure 6-2			1.4		2.5	V
V_OC(SS)	Change in steady-state common-mode output voltage	R_L = 54 Ω , See Figure 6-2			–50		50	mV
V_OC(pp)	Peak-to-peak common-mode output voltage	R_L = 54 Ω , C_L=50pF, PRR=500KHz, See Figure 6-2				400		mV
I_OS	Short-circuit output current	DE = V_CC, -7 V <V_O < 12 V, Voltage applied on one bus line with other bus line floating			–250		250	mA
C_OD	Differential output capacitance	V_I=0.4 sin (4E6πt) + 0.5 V, DE=0				16		pF
Receiver
I_I	Bus input current		V_CC = 3.6 V	V_I = 12 V		200	500	µA
			V_CC = 3.6 V	V_I = -7 V	–400	–200
			V_CC = 0 V	V_I = 12 V		250	500
			V_CC = 0 V	V_I = -7 V	–400	–150
V_TH+	Positive-going input-threshold voltage⁽¹⁾	Over common-mode range of (+12V,-7V)				–75	–20	mV
V_TH-	Negative-going input-threshold voltage⁽¹⁾				–200	–125		mV
V_HYS	Input hysteresis					50		mV
V_OH	Output high voltage	I_OH = -8 mA			2.4			V
V_OL	Output low voltage	I_OL = 8 mA					0.4	V
I_OZ	Output high-impedance current	V_O = 0 V or V_CC, RE = V_CC			–1		1	µA
C_ID	Differential input capacitance	VI=0.4 sin (4E6πt) + 0.5 V, DE=0				15		pF
Logic
I_IN	Input current DE	V_IN= 5V			0		100	µA
	Input current DE	V_IN= 0V			0		100	µA
	Input current D	V_IN= 5V			–100		0	µA
	Input current D	V_IN= 0V			–100		0	µA
	Input current ( RE)	V_IN = 2V			–30		0	µA
	Input current ( RE)	V_IN = 0.8V			–30		0	µA
Thermal Protection
T_SHDN	Thermal shutdown threshold	Temperature rising			150	170		°C
T_HYS	Thermal shutdown hysteresis					10		°C
Supply
I_CC	Supply current (quiescent)	Driver and receiver enabled		RE = 0 V, DE = V_CC, No load			2	mA
		Driver enabled, receiver disabled		RE = V_CC, DE = V_CC, No load			1.5	mA
		Driver disabled, receiver enabled		RE = 0 V, DE = 0 V, No load			1.5	mA
		Driver and receiver disabled		RE = V_CC, DE = 0 V, D = V_CC, No load			5	µA

(1) Under any specific conditions, V_TH+ is assured to be at least V_HYS higher than V_TH–.