米6体育平台手机版

ZHCSK86 September 2019 THVD1505

PRODUCTION DATA.

封装选项

机械数据 (封装 | 引脚)

D|8
- MSOI002K

散热焊盘机械数据 (封装 | 引脚)

订购信息

6.6 Electrical Characteristics

over operating free-air temperature range (unless otherwise noted)

PARAMETER		TEST CONDITIONS		MIN	TYP	MAX	UNIT
Driver
│V_OD│	Driver differential-output voltage magnitude	V_test from –7 to +12 V	See Figure 7	1.5	2.5		V
		R_L = 54 Ω (RS-485), C_L = 50 pF	See Figure 8	1.5	2.5
		R_L = 100 Ω (RS-422), C_L = 50 pF	See Figure 8	2	3
Δ│V_OD│	Change in magnitude of driver differential-output voltage	R_L = 54 Ω, C_L = 50 pF	See Figure 8	–50		50	mV
V_OC(SS)	Steady-state common-mode output voltage	R_L = 54 Ω, C_L = 50 pF	See Figure 8	1	V_CC / 2	3	V
ΔV_OC	Change in differential driver common-mode output voltage			–50		50	mV
V_OC(PP)	Peak-to-peak driver common-mode output voltage				250		mV
│I_OS│	Driver short-circuit output current	DE = V_CC, -7 V ≤ [V_A or V_B] ≤ 12 V, or A pin shorted to B pin				150	mA
C_OD	Differential output capacitance				8		pF
Receiver
I_I	Bus input current (driver disabled)	DE = 0 V, V_CC = 0 V or 5.5 V	V_I = 12 V		75	110	µA
I_I	Bus input current (driver disabled)	DE = 0 V, V_CC = 0 V or 5.5 V	V_I = –7 V	–90	–70		µA
R_A, R_B	Bus input impedance	V_A = -7 V, V_B = 12 V and V_A = 12 V, V_B = -7 V	See Figure 12	96			kΩ
V_IT+	Positive-going receiver differential-input voltage threshold				60	100	mV
V_IT–	Negative-going receiver differential-input voltage threshold			–100	–60		mV
V_HYS⁽¹⁾	Receiver differential-input voltage threshold hysteresis (V_IT+ – V_IT– )			40	120		mV
V_OH	Receiver high-level output voltage	I_OH = –8 mA		4	V_CC – 0.3		V
V_OL	Receiver low-level output voltage	I_OL = 8 mA			0.2	0.4	V
I_OZ	Receiver high-impedance output current	V_O = 0 V or V_CC, RE = V_CC		–1		1	µA
I_OSR	Receiver output short-circuit current	RE = 0, DE = 0	See Figure 13			95	mA
Logic
I_IN	Input current (D, DE, RE)			–2		2	µA
Supply
I_CC	Supply current (quiescent)	Driver and receiver enabled	DE = V_CC, RE = 0, no load		820	1100	µA
		Driver enabled, receiver disabled	DE = V_CC, RE = V_CC, no load		520	660
		Driver disabled, receiver enabled	DE = 0, RE = 0, no load		520	660
		Driver and receiver disabled	DE = 0, RE = V_CC, no load		0.03	1

(1) Under any specific conditions, V_IT+ is specified to be at least V_HYS higher thanV_IT–.