米6体育平台手机版

ZHCSGQ1C September 2017 – December 2018 THVD1510 , THVD1512 , THVD1550 , THVD1551 , THVD1552

PRODUCTION DATA.

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

D|14
DGS|10

散热焊盘机械数据 (封装 | 引脚)

订购信息

7.6 Electrical Characteristics

over operating free-air temperature range (unless otherwise noted)

PARAMETER		TEST CONDITIONS			MIN	TYP	MAX	UNIT
Driver
\|V_OD\|	Driver differential output voltage magnitude	R_L= 60 Ω, -15 V ≤ V_test ≤ 15 V, (See Figure 11)			1.5	2.7		V
		R_L = 100 Ω (See Figure 12)			2	3		V
		R_L = 54 Ω (See Figure 12)			1.5	2.7		V
Δ\|V_OD\|	Change in differential output voltage	R_L = 54 Ω (See Figure 12)			–200		200	mV
V_OC	Common-mode output voltage				1	V_CC/2	3	V
ΔV_OC(SS)	Change in steady-state common-mode output voltage				–200		200	mV
I_OS	Short-circuit output current	DE = V_CC, -15 V ≤ V_O ≤ 15V			–250		250	mA
Receiver
I_I	Bus input current	DE = 0 V, V_CC= 0 V or 5.5 V	THVD151x	V_I = 12 V		75	125	μA
				V_I = 15 V		95	156
				V_I = -7 V	-100	-40
				V_I = -15 V	-215	-85
			THVD155x	V_I = 12 V		115	160
				V_I = 15 V		150	200
				V_I= -7 V	-130	-75
				V_I = -15 V	-280	-180
Receiver
V_TH+	Positive-going input threshold voltage	Over common-mode range of - 7 V to +12 V			See⁽¹⁾	–85	–20	mV
V_TH-	Negative-going input threshold voltage				–200	–135	See⁽¹⁾	mV
V_HYS	Input hysteresis					50		mV
V_TH+	Positive-going input threshold voltage	Over common-mode range of ± 15 V			See⁽¹⁾	–85	–20	mV
V_TH-	Negative-going input threshold voltage				–220	–135	See⁽¹⁾	mV
V_HYS	Input hysteresis					50		mV
V_OH	Output high voltage	I_OH = -8 mA			4	V_CC - 0.3		V
V_OL	Output low voltage	I_OL = 8 mA				0.2	0.4	V
I_OZ	Output high-impedance current	V_O = 0 V or V_CC, RE = V_CC			-1		1	µA
Logic
I_IN	Input current (D, DE, RE)	4.5 V ≤ V_CC ≤ 5.5 V, 0 V ≤ V_IN ≤ V_CC			–5	0	5	µA
Supply
I_CC	Supply current (quiescent)	Driver and receiver enabled		RE = 0 V, DE = V_CC, No load		700	1000	µA
		Driver enabled, receiver disabled		RE = V_CC, DE = V_CC, No load		400	620	µA
		Driver disabled, receiver enabled		RE = 0 V, DE = 0 V, No load		400	630	µA
		Driver and receiver disabled		RE = V_CC, DE = 0 V, D = open, No load		0.1	1	µA
T_SD	Thermal shutdown temperature					170		°C

(1) Under any specific conditions, V_TH+ is specified to be at least V_HYS higher than V_TH–.