米6体育平台手机版

ZHCSK06F March 2005 – July 2019 TL431-Q1 , TL432-Q1

PRODUCTION DATA.

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

DBZ|3
DBV|5

散热焊盘机械数据 (封装 | 引脚)

订购信息

6.5 Electrical Characteristics: TL43x-Q1

over recommended operating conditions, T_A = 25°C (unless otherwise noted)

PARAMETER		TEST CONDITIONS		MIN	TYP	MAX	UNIT
V_REF	Reference voltage	V_KA = V_REF, I_KA = 10 mA, see Figure 20		2440	2495	2550	mV
V_I(DEV)	Deviation of reference voltage over full temperature⁽¹⁾	V_KA = V_REF, I_KA = 10 mA, T_A = –40°C to 125°C, see Figure 20			14	34	mV
ΔV_REF/ΔV_KA	Ratio of change in reference voltage to the change in cathode voltage	I_KA = 10 mA, see Figure 21	ΔV_KA = 10 V – V_REF		–1.4	–2.7	mV/V
ΔV_REF/ΔV_KA		I_KA = 10 mA, see Figure 21	ΔV_KA = 36 V – 10 V		–1	–2	mV/V
I_REF	Reference current	I_KA = 10 mA, R1 = 10 kΩ, R2 = ∞, see Figure 21			2	4	µA
I_I(DEV)	Deviation of reference current over full temperature⁽¹⁾	I_KA = 10 mA, R1 = 10 kΩ, R2 = ∞, T_A = –40°C to 125°C, see Figure 21			0.8	2.5	µA
I_MIN	Minimum cathode current for regulation	V_KA = V_REF, see Figure 20			0.4	1	mA
I_OFF	OFF-state cathode current	V_KA = 36 V, V_REF = 0, see Figure 22			0.1	1	µA
\|Z_KA\|	Dynamic impedance⁽¹⁾	I_KA = 1 mA to 100 mA, V_KA = V_REF, f ≤ 1 kHz, see Figure 20			0.2	0.5	Ω

(1) The deviation parameters (V_I(DEV) and I_I(DEV)) are defined as the differences between the maximum and minimum values obtained over the recommended temperature range.