SLLSE75B May   2011  – July 2016 TLK10002

PRODUCTION DATA.  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Description (continued)
  6. 6 Pin Configuration and Functions
  7. 7 Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings
    3. 7.3  Recommended Operating Conditions
    4. 7.4  Thermal Information
    5. 7.5  10-Gbps Power Characteristics - 1.0 V
    6. 7.6  10-Gbps Power Characteristics - 1.5 V
    7. 7.7  10-Gbps Power Characteristics - 1.8 V
    8. 7.8  Transmitter and Receiver Characteristics
    9. 7.9  MDIO Timing Requirements
    10. 7.10 JTAG Timing Requirements
    11. 7.11 Typical Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1  High-Speed Side Receiver Jitter Tolerance
      2. 8.3.2  Lane Alignment Scheme
      3. 8.3.3  Lane Alignment Components
      4. 8.3.4  Lane Alignment Operation
      5. 8.3.5  Channel Synchronization
      6. 8.3.6  Line Rate, SERDES PLL Settings, and Reference Clock Selection
      7. 8.3.7  Clocking Architecture
      8. 8.3.8  Loopback Modes
      9. 8.3.9  Deep Remote Loopback
      10. 8.3.10 Shallow Remote Loopback and Serial Retime
      11. 8.3.11 Deep Local Loopback
      12. 8.3.12 Shallow Local Loopback
      13. 8.3.13 Test Pattern Generation and Verification
      14. 8.3.14 Latency Measurement Function
      15. 8.3.15 Power-Down Mode
      16. 8.3.16 High Speed CML Output
      17. 8.3.17 High Speed Receiver
      18. 8.3.18 Loss of Signal Indication (LOS)
      19. 8.3.19 MDIO Management Interface
      20. 8.3.20 MDIO Protocol Timing
      21. 8.3.21 Clause 22 Indirect Addressing
    4. 8.4 Device Functional Modes
      1. 8.4.1 Transmit (Low Speed to High Speed) Data Path
      2. 8.4.2 Receive (High Speed to Low Speed) Data Path
      3. 8.4.3 1:1 Retime Mode
    5. 8.5 Programming
      1. 8.5.1 Power Sequencing Guidelines
    6. 8.6 Register Maps
  9. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curve
    3. 9.3 Initialization Setup
      1. 9.3.1 4:1 Mode (9.8304 Gbps on HS Side, 2.4576 Gbps Per Lane on LS Side)
      2. 9.3.2 2:1 Mode (9.8304 Gbps on HS Side, 4.9152 Gbps Per Lane on LS Side, Only Lanes 0 and 1 on LS Side Active)
      3. 9.3.3 1:1 Mode (4.9152 Gbps on HS Side, 4.9152Gbps on LS side, Only Lane 0 on LS Side Active)
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
      1. 11.1.1 AC Coupling
      2. 11.1.2 TLK10002 Clocks: REFCLK, CLKOUT - General Information
      3. 11.1.3 External Clock Connections
      4. 11.1.4 TLK10002 Control Pins and Interfaces
        1. 11.1.4.1 MDIO Interface
        2. 11.1.4.2 JTAG Interface
        3. 11.1.4.3 Unused Pins
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Receiving Notification of Documentation Updates
    2. 12.2 Community Resources
    3. 12.3 Trademarks
    4. 12.4 Electrostatic Discharge Caution
    5. 12.5 Glossary
  13. 13Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

7 Specifications

7.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)(1)
MIN MAX UNIT
Supply voltage DVDD, VDDA_LS/HS, VDDT_LS/HS, VPP, VDDD –0.3 1.4 V
Supply voltage VDDRA_LS/HS, VDDRB_LS/HS, VDDO[1:0] –0.3 2.2 V
Input voltage VI, (LVCMOS/LVDS/LVPECL/CML/Analog) –0.3 Supply + 0.3 V
Characterized free-air operating temperature –40 85 °C
Storage temperature, Tstg –65 150 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

7.2 ESD Ratings

VALUE UNIT
V(ESD) Electrostatic discharge Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) ±1000 V
Charged-device model (CDM), per JEDEC specification JESD22-C101(2) ±500
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

7.3 Recommended Operating Conditions

MIN NOM MAX UNIT
Digital / Analog supply voltages VDDD, VDDA_LS/HS, DVDD, VDDT_LS/HS, VPP 0.95 1.00 1.05 V
SERDES PLL regulator voltage VDDRA_LS/HS
VDDRB_LS/HS		 1.5 V nominal 1.425 1.5 1.575 V
1.8 V nominal 1.71 1.8 1.89 V
LVCMOS I/O supply voltage VDDO[1:0] 1.5 V nominal 1.425 1.5 1.575 V
1.8 V nominal 1.71 1.8 1.89 V
IDD Supply current VDDD 10 Gbps 375 mA
VDDA_LS/HS 460
DVDD + VPP 220
VDDT_LS/HS 540
VDDRA_LS 50
VDDRA_HS 20
VDDRB_LS 50
VDDRB_HS 20
VDDO[1:0] (1.5-V /1.8-V Mode) 1.5-V mode 6
1.8-V mode 8
PD All supplies worst case 1.75(1) W
ISD Shutdown current VDDD PD* Asserted 80 mA
VDDA 25
DVDD + VPP 15
VDDT 45
VDDRA_HS/LS + VDDRB_HS/LS 1.5-V mode 0.5
1.8-V mode 0.5
VDDO 1.5-V mode 5
1.8-V mode 5
(1) Total worst case power is not a sum of the individual power supply worst case as the individual power is taken from multiple modes. These modes are mutually exclusive and therefore used only for power supply requirements.

7.4 Thermal Information

THERMAL METRIC(1) TLK10002 UNIT
CTR (FCBGA)
144 PINS
RθJA Junction-to-ambient thermal resistance 24.5 °C/W
EVM Board (5in. x 7in., 14 layer, 1-oz. copper) 24.5
JEDEC High-K PCB 25.5
RθJC(top) Junction-to-case (top) thermal resistance SPACE 2.8 °C/W
EVM Board (5in. x 7in., 14 layer, 1-oz. copper)
JEDEC High-K PCB
RθJB Junction-to-board thermal resistance 15.2 °C/W
EVM Board (5in. x 7in., 14 layer, 1-oz. copper) 12
JEDEC High-K PCB 18
ψJT Junction-to-top characterization parameter 0.9 °C/W
EVM Board (5in. x 7in., 14 layer, 1-oz. copper) 0.9
JEDEC High-K PCB 1.8
ψJB Junction-to-board characterization parameter 14.0 °C/W
EVM Board (5in. x 7in., 14 layer, 1-oz. copper) 11
JEDEC High-K PCB 13.7
RθJC(bot) Junction-to-case (bottom) thermal resistance — °C/W
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report.

7.5 10-Gbps Power Characteristics – 1.0 V

at Vmax, 1.0 V Core, over operating free-air temperature range (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Power supply voltage VDDA_LS/HS, VDDT_LS/HS, VDDD, DVDD, VPP 2 Ch Mode, 4:1 at 10 Gpbs 0.95 1 1.05 V
2 Ch Mode, 2:1 at 10 Gpbs
1 Ch Mode, Ch A on, Ch B off, 4:1 at 10 Gpbs
1 Ch Mode, Ch A on, Ch B off, 2:1 at 10 Gpbs
1 Ch Mode, Ch A off, Ch B on, 4:1 at 10 Gpbs
1 Ch Mode, Ch A off, Ch B on, 2:1 at 10 Gpbs
Power supply current VDDA_LS/HS 2 Ch Mode, 4:1 at 10 Gpbs 0.407 A
2 Ch Mode, 2:1 at 10 Gpbs 0.411
1 Ch Mode, Ch A on, Ch B off, 4:1 at 10 Gpbs 0.222
1 Ch Mode, Ch A on, Ch B off, 2:1 at 10 Gpbs 0.22
1 Ch Mode, Ch A off, Ch B on, 4:1 at 10 Gpbs 0.229
1 Ch Mode, Ch A off, Ch B on, 2:1 at 10 Gpbs 0.228
VDDT_LS/HS 2 Ch Mode, 4:1 at 10 Gpbs 0.489 A
2 Ch Mode, 2:1 at 10 Gpbs 0.347
1 Ch Mode, Ch A on, Ch B off, 4:1 at 10 Gpbs 0.268
1 Ch Mode, Ch A on, Ch B off, 2:1 at 10 Gpbs 0.197
1 Ch Mode, Ch A off, Ch B on, 4:1 at 10 Gpbs 0.273
1 Ch Mode, Ch A off, Ch B on, 2:1 at 10 Gpbs 0.199
DVDD+VPP 2 Ch Mode, 4:1 at 10 Gpbs 0.1743 A
2 Ch Mode, 2:1 at 10 Gpbs 0.1887
1 Ch Mode, Ch A on, Ch B off, 4:1 at 10 Gpbs 0.1375
1 Ch Mode, Ch A on, Ch B off, 2:1 at 10 Gpbs 0.1407
1 Ch Mode, Ch A off, Ch B on, 4:1 at 10 Gpbs 0.1356
1 Ch Mode, Ch A off, Ch B on, 2:1 at 10 Gpbs 0.1414
VDDD 2 Ch Mode, 4:1 at 10 Gpbs 0.3151 A
2 Ch Mode, 2:1 at 10 Gpbs 0.333
1 Ch Mode, Ch A on, Ch B off, 4:1 at 10 Gpbs 0.21
1 Ch Mode, Ch A on, Ch B off, 2:1 at 10 Gpbs 0.2136
1 Ch Mode, Ch A off, Ch B on, 4:1 at 10 Gpbs 0.209
1 Ch Mode, Ch A off, Ch B on, 2:1 at 10 Gpbs 0.2165

7.6 10-Gbps Power Characteristics – 1.5 V

at Vmax, 1.5 V I/O, over operating free-air temperature range (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Power supply voltage VDDRA_LS/HS, VDDRB_LS/HS, VDDO 2 Ch Mode, 4:1 at 10 Gpbs 1.425 1.5 1.575 V
2 Ch Mode, 2:1 at 10 Gpbs
1 Ch Mode, Ch A on, Ch B off, 4:1 at 10 Gpbs
1 Ch Mode, Ch A on, Ch B off, 2:1 at 10 Gpbs
1 Ch Mode, Ch A off, Ch B on, 4:1 at 10 Gpbs
1 Ch Mode, Ch A off, Ch B on, 2:1 at 10 Gpbs
Power supply current VDDRA_LS 2 Ch Mode, 4:1 at 10 Gpbs 0.0191 A
2 Ch Mode, 2:1 at 10 Gpbs 0.0371
1 Ch Mode, Ch A on, Ch B off, 4:1 at 10 Gpbs 0.019
1 Ch Mode, Ch A on, Ch B off, 2:1 at 10 Gpbs 0.0371
1 Ch Mode, Ch A off, Ch B on, 4:1 at 10 Gpbs 0
1 Ch Mode, Ch A off, Ch B on, 2:1 at 10 Gpbs 0
VDDRA_HS 2 Ch Mode, 4:1 at 10 Gpbs 0.0152 A
2 Ch Mode, 2:1 at 10 Gpbs 0.0152
1 Ch Mode, Ch A on, Ch B off, 4:1 at 10 Gpbs 0.0153
1 Ch Mode, Ch A on, Ch B off, 2:1 at 10 Gpbs 0.0153
1 Ch Mode, Ch A off, Ch B on, 4:1 at 10 Gpbs 0
1 Ch Mode, Ch A off, Ch B on, 2:1 at 10 Gpbs 0
VDDRB_LS 2 Ch Mode, 4:1 at 10 Gpbs 0.0192 A
2 Ch Mode, 2:1 at 10 Gpbs 0.0374
1 Ch Mode, Ch A on, Ch B off, 4:1 at 10 Gpbs 0
1 Ch Mode, Ch A on, Ch B off, 2:1 at 10 Gpbs 0
1 Ch Mode, Ch A off, Ch B on, 4:1 at 10 Gpbs 0.0192
1 Ch Mode, Ch A off, Ch B on, 2:1 at 10 Gpbs 0.0374
VDDRB_HS 2 Ch Mode, 4:1 at 10 Gpbs 0.0155 A
2 Ch Mode, 2:1 at 10 Gpbs 0.0155
1 Ch Mode, Ch A on, Ch B off, 4:1 at 10 Gpbs 0
1 Ch Mode, Ch A on, Ch B off, 2:1 at 10 Gpbs 0
1 Ch Mode, Ch A off, Ch B on, 4:1 at 10 Gpbs 0.0156
1 Ch Mode, Ch A off, Ch B on, 2:1 at 10 Gpbs 0.0156
VDDO[1:0] 2 Ch Mode, 4:1 at 10 Gpbs 0.0037 A
2 Ch Mode, 2:1 at 10 Gpbs
1 Ch Mode, Ch A on, Ch B off, 4:1 at 10 Gpbs
1 Ch Mode, Ch A on, Ch B off, 2:1 at 10 Gpbs
1 Ch Mode, Ch A off, Ch B on, 4:1 at 10 Gpbs
1 Ch Mode, Ch A off, Ch B on, 2:1 at 10 Gpbs

7.7 10-Gbps Power Characteristics – 1.8 V

at Vmax, 1.8 V I/O, over operating free-air temperature range (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Power supply voltage VDDRA_LS/HS, VDDRB_LS/HS, VDDO 2 Ch Mode, 4:1 at 10 Gpbs 1.71 1.8 1.89 V
2 Ch Mode, 2:1 at 10 Gpbs
1 Ch Mode, Ch A on, Ch B off, 4:1 at 10 Gpbs
1 Ch Mode, Ch A on, Ch B off, 2:1 at 10 Gpbs
1 Ch Mode, Ch A off, Ch B on, 4:1 at 10 Gpbs
1 Ch Mode, Ch A off, Ch B on, 2:1 at 10 Gpbs
Power supply current VDDRA_LS 2 Ch Mode, 4:1 at 10 Gpbs 0.0191 A
2 Ch Mode, 2:1 at 10 Gpbs 0.0372
1 Ch Mode, Ch A on, Ch B off, 4:1 at 10 Gpbs 0.0191
1 Ch Mode, Ch A on, Ch B off, 2:1 at 10 Gpbs 0.0372
1 Ch Mode, Ch A off, Ch B on, 4:1 at 10 Gpbs 0
1 Ch Mode, Ch A off, Ch B on, 2:1 at 10 Gpbs 0
VDDRA_HS 2 Ch Mode, 4:1 at 10 Gpbs 0.0151 A
2 Ch Mode, 2:1 at 10 Gpbs 0.0151
1 Ch Mode, Ch A on, Ch B off, 4:1 at 10 Gpbs 0.0151
1 Ch Mode, Ch A on, Ch B off, 2:1 at 10 Gpbs 0.0151
1 Ch Mode, Ch A off, Ch B on, 4:1 at 10 Gpbs 0
1 Ch Mode, Ch A off, Ch B on, 2:1 at 10 Gpbs 0
VDDRB_LS 2 Ch Mode, 4:1 at 10 Gpbs 0.0194 A
2 Ch Mode, 2:1 at 10 Gpbs 0.0376
1 Ch Mode, Ch A on, Ch B off, 4:1 at 10 Gpbs 0
1 Ch Mode, Ch A on, Ch B off, 2:1 at 10 Gpbs 0
1 Ch Mode, Ch A off, Ch B on, 4:1 at 10 Gpbs 0.0193
1 Ch Mode, Ch A off, Ch B on, 2:1 at 10 Gpbs 0.0376
VDDRB_HS 2 Ch Mode, 4:1 at 10 Gpbs 0.0154 A
2 Ch Mode, 2:1 at 10 Gpbs 0.0154
1 Ch Mode, Ch A on, Ch B off, 4:1 at 10 Gpbs 0
1 Ch Mode, Ch A on, Ch B off, 2:1 at 10 Gpbs 0
1 Ch Mode, Ch A off, Ch B on, 4:1 at 10 Gpbs 0.0155
1 Ch Mode, Ch A off, Ch B on, 2:1 at 10 Gpbs 0.0155
VDDO[1:0] 2 Ch Mode, 4:1 at 10 Gpbs 0.0047 A
2 Ch Mode, 2:1 at 10 Gpbs 0.0047
1 Ch Mode, Ch A on, Ch B off, 4:1 at 10 Gpbs 0.0046
1 Ch Mode, Ch A on, Ch B off, 2:1 at 10 Gpbs 0.0047
1 Ch Mode, Ch A off, Ch B on, 4:1 at 10 Gpbs 0.0046
1 Ch Mode, Ch A off, Ch B on, 2:1 at 10 Gpbs 0.0047

7.8 Transmitter and Receiver Characteristics

PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
HIGH-SPEED SIDE SERIAL TRANSMITTER
VOD(pp) TX Output differential peak-to-peak voltage swing SWING (3.15:12) = 0000 50 130 220 mVpp
SWING (3.15:12) = 0001 110 220 320
SWING (3.15:12) = 0010 180 300 430
SWING (3.15:12) = 0011 250 390 540
SWING (3.15:12) = 0100 320 480 650
SWING (3.15:12) = 0101 390 570 770
SWING (3.15:12) = 0110 460 660 880
SWING (3.15:12) = 0111 530 750 1000
SWING (3.15:12) = 1000 590 830 1100
SWING (3.15:12) = 1001 660 930 1220
SWING (3.15:12) = 1010 740 1020 1320
SWING (3.15:12) = 1011 820 1110 1430
SWING (3.15:12) = 1100 890 1180 1520
SWING (3.15:12) = 1101 970 1270 1610
SWING (3.15:12) = 1110 1060 1340 1680
SWING (3.15:12) = 1111 1090 1400 1740
VCMT TX Output common-mode voltage 100-Ω differential termination, DC-coupled VDDT-(0.25*VOD(pp)) mV
tskew Intra-pair output skew SWING(3.15:12) = 0110 0.09 UI
tr, tf Differential output signal rise,
Fall time (20% to 80%)
Differential load = 100Ω		 20 ps
JT1 Serial output total jitter (CPRI LV/LV-II/LV-III and OBSAI Rates) Serial Rate ≤ 3.072 Gbps
(Not Applicable to LV-II/LV-III)		 0.35 UI
Serial Rate > 3.072 Gbps
(And All LV-II/LV-III Rates)		 0.30
JD1 Serial output deterministic jitter (CPRI LV/LV-II/ LV-III and OBSAI Rates) Serial Rate ≤ 3.072 Gbps
(Not Applicable to LV-II/LV-III)		 0.17 UI
Serial Rate > 3.072 Gbps
(And All LV-II/LV-III Rates)		 0.15
JT2 Serial output total jitter
(CPRI E.12.HV) 		CPRI E.12.HV (0.6144 and 1.2288 Gbps) 0.279 UI
JD2 Serial output deterministic jitter (CPRI E.12.HV) 0.14
Scc22 Common-mode output return loss 100MHz < f < 1.0 GHz 7 dB
1.0GHz < f < 5.0 GHz 5
T(LATENCY) Transmit path latency See Figure 19 UI
HIGH-SPEED SIDER SERIAL RECEIVER
VID RX Input differential voltage |RXP – RXN| Full Rate AC-Coupled 50 600 mV
Half/Quarter/Eighth Rate AC-Coupled 50 800
VID(pp) RX Input differential peak-to-peak voltage swing
2 * |RXP – RXN|		 Full Rate AC-Coupled 100 1200 mVpp
Half/Quarter/Eighth Rate AC-Coupled 100 1600
CI RX Input capacitance 2 pF
JTOL Jitter tolerance, total jitter at serial input (DJ + RJ) (BER 10-15) Zero crossing Half/Quarter/Eighth Rate 0.66 UIpp
Zero crossing Full Rate 0.65
JDR Serial input deterministic jitter (BER 10-15) Zero crossing Half/Quarter/Eighth Rate 0.50 UIpp
Zero crossing Full Rate 0.35
SDD11 Differential input return loss 100 MHz < f < 0.75*[Serial Bit Rate] 8 dB
0.75 × [Serial Bit Rate] < f < [Serial Bit Rate] See (1)
tskew Intra-pair input skew 0.23 UI
t(LATENCY) Receive path latency See Figure 19 UI
LOW-SPEED SIDE SERIAL TRANSMITTER CHARACTERISTICS
VOD(pp) Transmitter output differential peak-to-peak voltage swing SWING (7:14:12) = 000 110 190 280 mVpp
SWING (7:14:12) = 001 280 380 490
SWING (7:14:12) = 010 420 560 700
SWING (7:14:12) = 011 560 710 870
SWING (7:14:12) = 100 690 850 1020
SWING (7:14:12) = 101 760 950 1150
SWING (7:14:12) = 110 800 1010 1230
SWING (7:14:12)= 111 830 1050 1270
VCMT Transmitter output common mode voltage 100-Ω differential termination, DC-coupled VDDT - (0.5*VOD(pp)) mV
tskew Intra-pair output skew 0.045 UI
tR, tF Differential output signal rise, fall time (20% to 80%) Differential Load = 100Ω 30 - - ps
JT Serial output total jitter 0.35 UI
JD Serial output deterministic jitter 0.17 UI
LOW-SPEED SIDE SERIAL RECEIVER CHARACTERISTICS
VID Receiver input differential voltage| INP – INN| Full Rate AC-Coupled 50 600 mV
Half/Quarter Rate AC-Coupled 50 800
VID(pp) Receiver input differential peak-to-peak voltage swing
2 × |INP – INN|		 Full Rate AC-Coupled 100 1200 mVdfpp
Half/Quarter Rate AC-Coupled 100 1600
CI Receiver input capacitance 2 pF
JTOL Jitter tolerance, total jitter at serial input
(DJ + RJ)(BER 10-15)		 Zero crossing Half/Quarter Rate 0.66 UIpp
Zero crossing Full Rate 0.65
JDR Serial input deterministic jitter(BER 10-15) Zero crossing Half/Quarter Rate 0.50 UIpp
Zero crossing Full Rate 0.35
Sdd11 Differential input return loss 625 MHz < f < 2.5 GHz 8 dB
tskew Intra-pair input skew 0.23 UI
tlane-skew Lane-to-lane input skew 30 UI
REFERENCE CLOCK CHARACTERISTICS (REFCLK0P/N, REFCLK1P/N)
F Frequency 122.88 425 MHz
FHSoffset Accuracy Relative to Nominal HS Serial Data Rate –100 100 ppm
Relative to Incoming HS Serial Data Rate –200 200
FLSoffset Accuracy to LS serial data Synchronous (Multiple/Divide) 0 0 0 ppm
DC Duty cycle High Time 45% 50% 55%
VID Differential input voltage 250 2000 mVpp
CIN Input capacitance 1 pF
RIN Differential input impedance 100 Ω
TRISE Rise/fall time 10% to 90% 50 350 ps
JR Random jitter 12 kHz to 20 MHz 4 ps-RMS
DIFFERENTIAL OUTPUT CLOCK CHARACTERISTICS (CLKOUTAP/N, CLKOUTBP/N)
VOD Differential Output Voltage Peak to peak 1000 2000 mVpp
TRISE Output Rise Time 10% to 90%, 2pF lumped capacitive load, AC-Coupled 350 ps
RTERM Output Termination CLKOUTA/BP/N to DVDD 40 50 60 Ω
F Output Frequency 0 500 MHz
LVCMOS ELECTRICAL CHARACTERISTICS (VDDO)
VOH High-level output voltage IOH = 2 mA, Driver Enabled (1.8 V) VDDO – 0.45 VDDO V
IOH = 2 mA, Driver Enabled (1.5 V) 0.75 × VDDO VDDO
VOL Low-level output voltage IOL = –2 mA, Driver Enabled (1.8 V) 0 0.45 V
IOL = –2 mA, Driver Enabled (1.5 V) 0 0.25 × VDDO
VIH High-level input voltage 0.65 × VDDO VDDO + 0.3 V
VIL Low-level input voltage –0.3 0.35 × VDDO V
IIH, IIL Low/high input current Receiver only ±170 µA
IOZ High-impedance output current Driver disabled ±25 µA
Driver disabled with pullup or pulldown enabled ±195
CIN Input capacitance 3 pF
(1) Differential input return loss, SDD11 = 8 – 16.6 log10(f / (0.75 × [Serial Bit Rate])) dB

7.9 MDIO Timing Requirements

over recommended operating conditions (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
tperiod MDC period See Figure 4 100 ns
tsetup MDIO setup to ↑ MDC See Figure 4 10 ns
thold MDIO hold to ↑ MDC See Figure 4 10 ns
tvalid MDIO valid from MDC ↑ 0 40 ns

7.10 JTAG Timing Requirements

over recommended operating conditions (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
tPERIOD TCK period See Figure 5 66.67 ns
tSETUP TDI/TMS/TRST_N setup to ↑ TCK See Figure 5 3 ns
tHOLD TDI/TMS/TRST_N hold from ↑ TCK See Figure 5 5 ns
tVALID TDO delay from TCK falling See Figure 5 0 10 ns
TLK10002 op_wf_llse75.gif Figure 1. Transmit Output Waveform Parameter Definitions
TLK10002 prepost_cursor_llse75.gif Figure 2. Pre/Post Cursor Swing Definitions
TLK10002 input_jit_llse75.gif

NOTE:

JTOL = JR + JDR, where JTOL is the receive jitter tolerance, JDR is the received deterministic jitter, and JR is the Gaussian random edge jitter distribution at a maximum BER = 10-12 for CPRI link and BER = 10-15 for OBSAI (RP3) link.
Figure 3. Input Jitter Definition
TLK10002 MDIO_rw_tim_llse75.gif Figure 4. MDIO Read/Write Timing
TLK10002 JATAG_tim_llse75.gif Figure 5. JTAG Timing

7.11 Typical Characteristics

TLK10002 transmitter_output_4_inch_sllse75.gif
Total Jitter = .298 UI, PRBS 27-1, 4:1 Mode, RefClk=122.88MHz, Swing = 1260 mVpp, PRE = -5, POST1 = -10, POST2 = -7.5, AC-coupled
Figure 6. Transmitter Output (4-Inch FR-4 Trace)
TLK10002 transmitter_output_12_inch_sllse75.gif
Total Jitter = .339 UI, PRBS 27-1, 4:1 Mode, RefClk=122.88MHz, Swing = 1260 mVpp, PRE = -2.5, POST1 = -17.5, POST2 = 0, AC-coupled
Figure 8. Transmitter Output (12-Inch FR-4 Trace)
TLK10002 transmitter_output_8_inch_sllse75.gif
Total Jitter = .339 UI, PRBS 27-1, 4:1 Mode, RefClk=122.88MHz, Swing = 1260 mVpp, PRE = -2.5, POST1 = -17.5, POST2 = 0, AC-coupled
Figure 7. Transmitter Output (8-Inch FR-4 Trace)
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |