米6体育平台手机版

ZHCSMT5M December 2004 – January 2023 TLV1117

PRODUCTION DATA

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

KVU|3
DRJ|8
DCY|4
KCS|3
KTT|3
KCT|3

散热焊盘机械数据 (封装 | 引脚)

KVU|3
- QFND404A
KTT|3
- PPTD068B
DRJ|8
- QFND085E
DCY|4
- QFND222B

订购信息

6.5 TLV1117C Electrical Characteristics

T_J = 0°C to 125°C, all typical values are at T_J = 25°C (unless otherwise noted)

PARAMETER	TEST CONDITIONS⁽¹⁾		MIN	TYP	MAX	UNIT
Reference voltage, V_REF	V_IN – V_OUT = 2 V, I_OUT = 10 mA, T_J = 25°C	TLV1117	1.238	1.25	1.262	V
Reference voltage, V_REF	V_IN – V_OUT = 1.4 V to 10 V, I_OUT = 10 mA to 800 mA	TLV1117	1.225	1.25	1.27
Output voltage, V_OUT	V_IN = 3.5 V, I_OUT = 10 mA, T_J = 25°C	TLV1117-15	1.485	1.5	1.515
	V_IN = 2.9 V to 10 V, I_OUT = 0 mA to 800 mA	TLV1117-15	1.455	1.5	1.545
	V_IN = 3.8 V, I_OUT = 10 mA, T_J = 25°C	TLV1117-18	1.782	1.8	1.818
	V_IN = 3.2 V to 10 V, I_OUT = 0 mA to 800 mA	TLV1117-18	1.746	1.8	1.854
	V_IN = 4.5 V, I_OUT = 10 mA, T_J = 25°C	TLV1117-25	2.475	2.5	2.525
	V_IN = 3.9 V to 10 V, I_OUT = 0 mA to 800 mA	TLV1117-25	2.450	2.5	2.550
	V_IN = 5 V, I_OUT = 10 mA, T_J = 25°C	TLV1117-33	3.267	3.3	3.333
	V_IN = 4.75 V to 10 V, I_OUT = 0 mA to 800 mA	TLV1117-33	3.235	3.3	3.365
	V_IN = 7 V, I_OUT = 10 mA, T_J = 25°C	TLV1117-50	4.950	5.0	5.050
	V_IN = 6.5 V to 12 V, I_OUT = 0 mA to 800 mA	TLV1117-50	4.900	5.0	5.100
Line regulation	I_OUT = 10 mA, V_IN – V_OUT = 1.5 V to 13.75 V	TLV1117		0.035%	0.2%	—
	I_OUT = 0 mA, V_IN = 2.9 V to 10 V	TLV1117-15		1	6	mV
	I_OUT = 0 mA, V_IN = 3.2 V to 10 V	TLV1117-18		1	6
	I_OUT = 0 mA, V_IN = 3.9 V to 10 V	TLV1117-25		1	6
	I_OUT = 0 mA, V_IN = 4.75 V to 15 V	TLV1117-33		1	6
	I_OUT = 0 mA, V_IN = 6.5 V to 15 V	TLV1117-50		1	10
Load regulation	I_OUT = 10 mA to 800 mA, V_IN – V_OUT = 3 V	TLV1117		0.2%	0.4%	—
	I_OUT = 0 mA to 800 mA, V_IN = 2.9 V	TLV1117-15		1	10	mV
	I_OUT = 0 mA to 800 mA, V_IN = 3.2 V	TLV1117-18		1	10
	I_OUT = 0 mA to 800 mA, V_IN = 3.9 V	TLV1117-25		1	10
	I_OUT = 0 mA to 800 mA, V_IN = 4.75 V	TLV1117-33		1	10
	I_OUT = 0 mA to 800 mA, V_IN = 6.5 V	TLV1117-50		1	15
Dropout voltage, V_DO ⁽²⁾	I_OUT = 100 mA			1.1	1.2	V
	I_OUT = 500 mA			1.15	1.25
	I_OUT = 800 mA			1.2	1.3
Current limit	V_IN – V_OUT = 5 V, T_J = 25°C⁽³⁾		0.8	1.2	1.6	A
Minimum load current	V_IN = 15 V	TLV1117		1.7	5	mA
Quiescent current	V_IN ≤ 15 V	All fixed-voltage options		5	10	mA
Thermal regulation	30-ms pulse, T_A = 25°C			0.01	0.1	%/W
Ripple rejection	V_IN – V_OUT = 3 V, V_ripple = 1 V_pp, f = 120 Hz		60	75		dB
ADJ pin current				80	120	μA
Change in ADJ pin current	V_IN – V_OUT = 1.4 V to 10 V, I_OUT = 10 mA to 800 mA			0.2	5	μA
Temperature stability	T_J = full range			0.5%		—
Long-term stability	1000 hrs, no load, T_A = 125°C			0.3%		—
Output noise voltage (% of V_OUT)	f = 10 Hz to 100 kHz			0.003%		—

(1) All characteristics are measured with a 10-μF capacitor across the input and a 10-μF capacitor across the output. Pulse testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible.

(2) Dropout is defined as the V_IN to V_OUT differential at which V_OUT drops 100 mV below the value of V_OUT,
measured at V_IN = V_OUT(nom) + 1.5 V.

(3) Current limit test specified under recommended operating conditions.