8.3.4 Capacitive Load and Stability

The dynamic characteristics of the TLVx172 are optimized for common operating conditions. The combination of low closed-loop gain and high capacitive loads decreases the phase margin of the amplifier and can lead to gain peaking or oscillations. As a result, heavier capacitive loads must be isolated from the output. The simplest way to achieve this isolation is to add a small resistor (for example, R_OUT equal to 50 Ω) in series with the output. Figure 27 and Figure 28 show graphs of small-signal overshoot versus capacitive load for several values of R_OUT. See the Feedback Plots Define Op Amp AC Performance application note for details of analysis techniques and application circuits.

100-mV output step, G = –1

Figure 27. Small-Signal Overshoot vs Capacitive Load

100-mV output step, G = 1

Figure 28. Small-Signal Overshoot vs Capacitive Load