6.1 Absolute Maximum Ratings
over operating junction temperature range (unless otherwise noted)(1)
|
MIN |
MAX |
UNIT |
| Voltage |
VDD |
–0.3 |
7 |
V |
| OUT1, OUT2 (TLV4062 only) |
–0.3 |
VDD + 0.3 |
| OUT1, OUT2 (TLV4082 only) |
–0.3 |
7 |
| IN1, IN2 |
–0.3 |
7 |
| Current |
IN1, IN2(2) |
|
10 |
mA |
| OUT1, OUT2 |
|
±20 |
| Temperature |
Operating junction, TJ(3) |
–40 |
125 |
°C |
| Storage, Tstg |
–65 |
150 |
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Input terminals are diode-clamped to GND. Input signals that can swing 0.3V below GND must be current-limited to 10mA or less.
(3) For low-power devices, the junction temperature rise above the ambient temperature is negligible; therefore, the junction temperature is considered equal to the ambient temperature (TJ = TA).