米6体育平台手机版

PRODUCTION DATA

6.10 Switching Characteristics (Dual)

Typical values are at T_A = 25°C, V_S = 5 V, V_CM = V_S / 2; CL = 15 pF, input overdrive = 100 mV (unless otherwise noted).

PARAMETER		TEST CONDITIONS	TYP	UNIT
t_PHL	Propagation delay time, high to- low (RP = 4.99 kΩ open-drain only) ⁽¹⁾	Midpoint of input to midpoint of output, V_OD = 100 mV	3	µs
t_PLH	Propagation delay time, low-to high (RP = 4.99 kΩ open-drain only) ⁽¹⁾	Midpoint of input to midpoint of output, V_OD = 100 mV	3	µs
t_R	Rise time (push-pull only)	Measured from 20% to 80%	4.5	ns
t_F	Fall time	Measured from 20% to 80%	4.5	ns
t_ON	Power-up time	During power on, V_CCmust exceed 1.6V for 200 µs before the output will reflect the input..	200	µs

(1) The lower limit for RP is 650 Ω