米6体育平台手机版

ZHCSL29A April 2020 – December 2020 TLV767-Q1

PRODUCTION DATA

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

DRB|8

散热焊盘机械数据 (封装 | 引脚)

订购信息

6.5 Electrical Characteristics

specified at T_J = –40°C to 150°C, V_IN= V_OUT(nom)+ 1.5 V or V_IN = 2.5 V (whichever is greater), FB/SNS tied to OUT, I_OUT= 10 mA, V_EN = 2 V, C_IN = 1.0 µF, and C_OUT= 1.0 µF (unless otherwise noted); typical values are at T_J= 25ºC

PARAMETER		TEST CONDITIONS		MIN	TYP	MAX	UNIT
V_OUT	Output accuracy	T_J = 25°C		–0.5		0.5	%
		T_J = –40°C to 150°C	V_IN ≥ 3.0 V, 1 mA ≤ I_OUT ≤ 1 A	–1		1	%
		T_J = –40°C to 150°C	2.5 V ≤ V_IN< 3.0 V, 1 mA ≤ I_OUT ≤ 800 mA	–1		1	%
V_FB	Feedback voltage				0.8		V
V_REF	Internal reference (adjustable device)	T_J= 25°C		–0.5		0.5	%
V_REF	Internal reference (adjustable device)	T_J = –40°C to 150°C		–1		1	%
I_FB	Feedback pin current	V_FB = 1 V		–20	1	50	nA
ΔV_OUT(ΔVIN)	Line regulation⁽¹⁾	V_OUT(NOM)+1.5 V ≤ V_IN≤ 16 V, I_OUT= 10 mA				0.02	%/V
ΔV_OUT(ΔIOUT)	Load regulation	1 mA ≤ I_OUT≤ 1 A, V_IN ≥ 3.0 V			0.1	0.5	%/A
ΔV_OUT(ΔIOUT)	Load regulation	1 mA ≤ I_OUT≤ 800 mA, 2.5 V ≤ V_IN < 3.0 V			0.1	0.5	%/A
V_DO	Dropout voltage⁽²⁾	V_IN(NOM)≥ 3.0V, I_OUT= 1 A		0.63	0.94	1.5	V
V_DO	Dropout voltage⁽²⁾	2.5 V ≤ V_IN(NOM)< 3.0 V, I_OUT= 800 mA		0.48	0.8	1.4	V
I_CL	Output current limit	V_OUT= 0.9 x V_OUT(NOM) _,V_IN ≥ 3.0V		1.1	1.37	1.6	A
I_CL	Output current limit	V_OUT = 0.9 x V_OUT(NOM), 2.5 V ≤ V_IN< 3.0 V		0.81	1.28	1.6	A
I_SC	Short-circuit current limit	V_OUT= 0 V		150	250	350	mA
I_Q	Quiescent current	Adjustable output device, I_OUT= 0 mA		25	50	80	µA
I_Q	Quiescent current	Fixed output devices, I_OUT = 0 mA		25	60	95	µA
I_GND	Ground current	I_OUT = 1 A, V_IN≥ 3.0 V			1.5		mA
I_SHUTDOWN	Shutdown current	V_EN≤ 0.4 V, V_IN= 16 V		0.1	1.6	4	µA
V_EN(HIGH)	Enable pin logic high	2.5 V ≤ V_IN≤ 16 V		1.2			V
V_EN(LOW)	Enable pin logic low	2.5 V ≤ V_IN≤ 16 V				0.4	V
I_EN	Enable pullup current	V_EN = 0 V		200	400	800	nA
I_PULLDOWN	Output pulldown current	V_IN= 16 V, V_OUT= 2.5 V, V_EN= 0 V		0.9	1.4	1.6	mA
PSRR	Power-supply rejection ratio	V_IN= 3.3 V, V_OUT= 1.8 V, I_OUT= 300 mA, f = 120 Hz			70		dB
V_n	Output noise voltage	BW = 10 Hz to 100 kHz, V_IN= 3.3 V, V_OUT= 0.8 V, I_OUT= 100 mA			60		µV_RMS
V_UVLO+	UVLO threshold rising	V_IN rising		2	2.22	2.4	V
V_UVLO-	UVLO threshold falling	V_IN falling		1.9	2.09	2.3	V
V_UVLO(HYS)	UVLO hysteresis			100	130	200	mV
T_SD(shutdown)	Thermal shutdown temperature	Temperature increasing			180		ºC
T_SD(reset)	Thermal shutdown reset temperature	Temperature falling			160		ºC

(1) Line regulation is measured with V_IN = V_OUT(NOM) + 1.5 V or 2.5 V (whichever is greater).

(2) V_DO is measured with V_IN = 95% x V_OUT(nom) for fixed output devices. V_DOis not measured for fixed output devices when V_OUT < 2.5 V. For the adjustable output device, V_DO is measured with V_FB = 95% x V_FB(nom) _.