米6体育平台手机版

ZHCSMJ5F june 2010 – december 2020 TLV809

PRODUCTION DATA

7.5 Electrical Characteristics

at T_A = –40°C to +85°C (unless otherwise noted); typical values are at T_A = 25°C

PARAMETER			TEST CONDITIONS	MIN	TYP	MAX	UNIT
V_OH	High-level output voltage		V_DD = 2.5 V to 6 V, I_OH = –500 µA	V_DD – 0.2			V
			V_DD = 3.3 V, I_OH = –2 mA	V_DD – 0.4
			V_DD = 6 V, I_OH = –4 mA	V_DD – 0.4
V_OL	Low-level output voltage		V_DD = 2 V to 6 V, I_OH = 500 µA			0.3	V
			V_DD = 3.3 V, I_OH = 2 mA			0.4
			V_DD = 6 V, I_OH = 4 mA			0.4
	Power-up reset voltage⁽¹⁾		V_DD ≥ 1.1 V, I_OL = 50 µA			0.2	V
V_IT–	Negative-going input threshold voltage⁽²⁾	TLV809J25	T_A = –40°C to +85°C	2.20	2.25	2.30	V
		TLV809L30		2.58	2.64	2.70
		TLV809K33		2.87	2.93	2.99
		TLV809I50		4.45	4.55	4.65
V_hys	Hysteresis	TLV809J25			30		mV
		TLV809L30			35
		TLV809K33			40
		TLV809I50			60
I_DD	Supply current		V_DD = 2 V, RESET is unconnected		9	12	µA
I_DD	Supply current		V_DD = 6 V, RESET is unconnected		20	25	µA
C_I	Input capacitance		V_I = 0 V to V_DD		5		pF

(1) The lowest supply voltage at which RESET becomes active. t_{r, VDD} ≥ 15 ms/V.

(2) To ensure best stability of the threshold voltage, place a bypass capacitor ( 0.1-µF ceramic) near the supply pins.