ZHCSGX3E august 2017 – june 2023 TMUX136
PRODUCTION DATA
The TMUX136 has a high impedance mode that places all the signal paths in a Hi-Z state while the device is not in use. As provided in Table 8-1, to put the device in high impedance mode and disable the switch, the bus-switch enable pin EN must be supplied with a logic High signal.
| SEL | EN | SWITCH STATUS |
|---|---|---|
| X | High | Both A PORT and B PORT switches in High-Z |
| Low | Low | COM to A PORT |
| High | Low | COM to B PORT |