ZHCSOU4B November 2022 – September 2024 TMUX6201 , TMUX6202
PRODUCTION DATA
| 参数 | 测试条件 | TA | 最小值 | 典型值 | 最大值 | 单位 | |
|---|---|---|---|---|---|---|---|
| 模拟开关 | |||||||
| RON | 导通电阻 | VDD = +4.5V，VSS = -4.5V VS = -4.5V 至 +4.5V ID = -10mA |
25°C | 2.3 | 3.5 | Ω | |
| –40°C 至 +85°C | 4.4 | Ω | |||||
| –40°C 至 +125°C | 4.9 | Ω | |||||
| RON FLAT | 导通电阻平坦度 | VS = -4.5V 至 +4.5V ID = -10mA |
25°C | 0.8 | 1.5 | Ω | |
| –40°C 至 +85°C | 1.8 | Ω | |||||
| –40°C 至 +125°C | 2 | Ω | |||||
| RON DRIFT | 导通电阻漂移 | VS = 0V，IS = -10mA | –40°C 至 +125°C | 0.019 | Ω/°C | ||
| IS(OFF) | 源极关断漏电流(1) | VDD = +5.5V，VSS = -5.5V 开关状态为关断 VS = +4.5V/-4.5V VD = -4.5V/+4.5V |
25°C | –0.4 | 0.02 | 0.4 | nA |
| –40°C 至 +85°C | –1.5 | 1.5 | nA | ||||
| –40°C 至 125°C | -20 | 20 | nA | ||||
| ID(OFF) | 漏极关断漏电流(1) | VDD = +5.5V，VSS = -5.5V 开关状态为关断 VS = +4.5V/-4.5V VD = -4.5V/+4.5V |
25°C | –0.4 | 0.02 | 0.4 | nA |
| –40°C 至 +85°C | –1.5 | 1.5 | nA | ||||
| –40°C 至 125°C | -20 | 20 | nA | ||||
| IS(ON) ID(ON) |
通道导通漏电流(2) | VDD = +5.5V，VSS = -5.5V 开关状态为导通 VS = VD = ±4.5V |
25°C | –0.4 | 0.02 | 0.4 | nA |
| –40°C 至 +85°C | -1 | 1 | nA | ||||
| –40°C 至 125°C | -20 | 20 | nA | ||||
| 逻辑输入（SEL/EN 引脚） | |||||||
| VIH | 逻辑电压高位 | –40°C 至 +125°C | 1.3 | 36 | V | ||
| VIL | 逻辑电压低位 | –40°C 至 +125°C | 0 | 0.8 | V | ||
| IIH | 输入漏电流 | –40°C 至 +125°C | 0.4 | 2.2 | µA | ||
| IIL | 输入漏电流 | –40°C 至 +125°C | -0.1 | –0.005 | µA | ||
| CIN | 逻辑输入电容 | –40°C 至 +125°C | 3.5 | pF | |||
| 电源 | |||||||
| IDD | VDD 电源电流 | VDD = +5.5V，VSS = -5.5V 逻辑输入 = 0V、5V 或 VDD |
25°C | 24 | 35 | µA | |
| –40°C 至 +85°C | 38 | µA | |||||
| –40°C 至 125°C | 42 | µA | |||||
| ISS | VSS 电源电流 | VDD = +5.5V，VSS = -5.5V 逻辑输入 = 0V、5V 或 VDD |
25°C | 4 | 9 | µA | |
| –40°C 至 +85°C | 11 | µA | |||||
| –40°C 至 125°C | 12 | µA | |||||