ZHCSNN0A october 2022 – march 2023 TMUX7201 , TMUX7202
PRODUCTION DATA
- 1 特性
- 2 应用
- 3 说明
- 4 Revision History
- 5 Pin Configuration and Functions
-
6 Specifications
- 6.1 Absolute Maximum Ratings
- 6.2 ESD Ratings
- 6.3 Thermal Information
- 6.4 Recommended Operating Conditions
- 6.5 Source or Drain Continuous Current
- 6.6 ±15 V Dual Supply: Electrical Characteristics
- 6.7 ±15 V Dual Supply: Switching Characteristics
- 6.8 ±20 V Dual Supply: Electrical Characteristics
- 6.9 ±20 V Dual Supply: Switching Characteristics
- 6.10 44 V Single Supply: Electrical Characteristics
- 6.11 44 V Single Supply: Switching Characteristics
- 6.12 12 V Single Supply: Electrical Characteristics
- 6.13 12 V Single Supply: Switching Characteristics
- 6.14 Typical Characteristics
- 7 Parameter Measurement Information
- 8 Detailed Description
- 9 Application and Implementation
- 10Device and Documentation Support
- 11Mechanical, Packaging, and Orderable Information
5 Pin Configuration and Functions
Figure 5-1 DGK
Package, 8-Pin VSSOP (Top View)
Figure 5-2 RQX
Package, 8-Pin WSON (Top View)Table 5-1 Pin Functions
| PIN | TYPE(1) | DESCRIPTION(2) | ||
|---|---|---|---|---|
| NAME | DGK | RQX | ||
| S | 1 | 1 | I/O | Source pin. Can be an input or output. |
| NC | 2 | 2 | NC | No connection. Not internally connected. |
| GND | 3 | 3 | P | Ground (0 V) reference |
| VDD | 4 | 4 | P | Positive power supply. This pin is the most positive power-supply potential. For reliable operation, connect a decoupling capacitor ranging from 0.1 µF to 10 µF between VDD and GND. |
| NC | 5 | 5 | NC | No connection. Not internally connected. |
| SEL | 6 | 6 | I | Logic control input, has internal Pull-Down resistor. For information about the switch connection controls, see Section 8.5. |
| VSS | 7 | 7 | P | Negative power supply. This pin is the most negative power-supply potential. In single-supply applications, this pin can be connected to ground. For reliable operation, connect a decoupling capacitor ranging from 0.1 µF to 10 µF between VSS and GND. |
| D | 8 | 8 | I/O | Drain pin. Can be an input or output. |
| Thermal Pad | — | The thermal pad is not connected internally. No requirement to solder this pad, if connected it is recommended that the pad be left floating or tied to GND | ||
(1) I = input, O = output, I/O = input or output, P = power, NC = no connection.
(2) For what to do with unused pins, refer to Section 8.4.