ZHCSNM9B march   2021  – june 2023 TMUX7462F

PRODUCTION DATA  

  1.   1
  2. 1 特性
  3. 2 应用
  4. 3 说明
  5. 4 Revision History
  6. 5 Pin Configuration and Functions
  7. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Thermal Information
    4. 6.4  Recommended Operating Conditions
    5. 6.5  Electrical Characteristics (Global)
    6. 6.6  ±15 V Dual Supply: Electrical Characteristics
    7. 6.7  ±20 V Dual Supply: Electrical Characteristics
    8. 6.8  12 V Single Supply: Electrical Characteristics
    9. 6.9  36 V Single Supply: Electrical Characteristics
    10. 6.10 Typical Characteristics
  8. 7 Parameter Measurement Information
    1. 7.1  On-Resistance
    2. 7.2  On-Leakage Current
    3. 7.3  Input and Output Leakage Current under Overvoltage Fault
    4. 7.4  Fault Response Time
    5. 7.5  Fault Recovery Time
    6. 7.6  Fault Flag Response Time
    7. 7.7  Fault Flag Recovery Time
    8. 7.8  Fault Drain Enable Time
    9. 7.9  Inter-Channel Crosstalk
    10. 7.10 Bandwidth
    11. 7.11 THD + Noise
  9. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Flat ON-Resistance
      2. 8.3.2 Protection Features
        1. 8.3.2.1 Input Voltage Tolerance
        2. 8.3.2.2 Powered-Off Protection
        3. 8.3.2.3 Fail-Safe Logic
        4. 8.3.2.4 Overvoltage Protection and Detection
        5. 8.3.2.5 Latch-Up Immunity
        6. 8.3.2.6 EMC Protection
      3. 8.3.3 Overvoltage Fault Flags
      4. 8.3.4 Bidirectional Operation
    4. 8.4 Device Functional Modes
      1. 8.4.1 Normal Mode
      2. 8.4.2 Fault Mode
      3. 8.4.3 Truth Table
  10. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curves
    3. 9.3 Power Supply Recommendations
    4. 9.4 Layout
      1. 9.4.1 Layout Guidelines
      2. 9.4.2 Layout Example
  11. 10Device and Documentation Support
    1. 10.1 Documentation Support
      1. 10.1.1 Related Documentation
    2. 10.2 接收文档更新通知
    3. 10.3 支持资源
    4. 10.4 Trademarks
    5. 10.5 静电放电警告
    6. 10.6 术语表
  12. 11Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

6.7 ±20 V Dual Supply: Electrical Characteristics

VDD = +20 V ± 10%, VSS = –20 V ±10%, GND = 0 V (unless otherwise noted) 
Typical at VDD = +20 V, VSS = –20 V, TA = 25℃  (unless otherwise noted)
PARAMETER TEST CONDITIONS TA MIN TYP MAX UNIT
ANALOG SWITCH
RON On-resistance VS = –15 V to +15 V
ID = –10 mA		 25°C 8.3 10.5 Ω
–40°C to +85°C 14
–40°C to +125°C 17
ΔRON On-resistance mismatch between channels VS = –15 V to +15 V
ID = –10 mA		 25°C 0.05 0.35 Ω
–40°C to +85°C 0.5
–40°C to +125°C 0.5
RFLAT On-resistance flatness VS = –15 V to +15 V
ID = –10 mA		 25°C 0.006 0.4 Ω
–40°C to +85°C 0.5
–40°C to +125°C 0.5
RON_DRIFT On-resistance drift VS = 0 V, IS = –10 mA –40°C to +125°C 0.04 Ω/°C
IS(ON), 
ID(ON)		 Channel on leakage current (1) Switch state is on,
VDD = 22 V, VSS = –22 V
VS = VD = ±15 V		 25°C –0.7 0.1 0.7 nA
–40°C to +85°C –2 2
–40°C to +125°C –15 15
FAULT CONDITION
IS(FA) Input leakage current
during overvoltage		 VS = ± 60 V, GND = 0 V, 
VDD = VFP = 22 V, VSS = VFN = –22 V		 –40°C to +125°C ±95 µA
IS(FA) Grounded Input leakage current
during overvoltage with
grounded supply voltages		 VS = ± 60 V, GND = 0V,
VDD = VSS = VFP = VFN = 0 V		 –40°C to +125°C ±135 µA
IS(FA) Floating Input leakage current
during overvoltage with
floating supply voltages		 VS = ± 60 V, GND = 0V,
VDD = VSS = VFP = VFN = floating		 –40°C to +125°C ±140 µA
ID(FA) Output leakage current
during overvoltage		 VS = ± 60 V, GND = 0 V, 
VDD = VFP = 22 V, VSS = VFN = –22 V,
VDR = 5 V or floating		 25°C –50 ±10 50 nA
–40°C to +85°C –70 70 nA
–40°C to +125°C –90 90 nA
ID(FA) Grounded Output leakage current
during overvoltage with
grounded supply voltages		 VS = ± 60 V, GND = 0 V,
VDD = VSS = VFP = VFN = 0 V		 25°C –700 ±500 700 nA
–40°C to +85°C –700 700 nA
–40°C to +125°C –700 700 nA
ID(FA) Floating Output leakage current
during overvoltage with
floating supply voltages		 VS = ± 60 V, GND = 0 V,
VDD = VSS = VFP = VFN = floating		 25°C ±0.6 µA
–40°C to +85°C ±1.3 µA
–40°C to +125°C ±2.3 µA
SWITCHING CHARACTERISTICS
tRESPONSE Fault response time VFP = 10 V, VFN = –10 V,
RL = 300 Ω, CL= 12 pF		 25°C 150 400 ns
–40°C to +85°C 430
–40°C to +125°C 450
tRECOVERY Fault recovery time VFP = 10 V, VFN = –10 V,
RL = 300 Ω, CL= 12 pF		 25°C 1100 4500 ns
–40°C to +85°C 4900
–40°C to +125°C 4900
tRESPONSE(FLAG) Fault flag response time VFP = 10 V, VFN = –10 V, 
VPU = 5 V, RPU = 1 kΩ, CL= 12 pF		 –40°C to +125°C 220 ns
tRECOVERY(FLAG) Fault flag recovery time VFP = 10 V, VFN = –10 V, 
VPU = 5 V, RPU = 1 kΩ, CL= 12 pF		 –40°C to +125°C 1.1 µs
tRESPONSE(DR) Fault output response time VFP = 10 V, VFN = –10 V, VPU = 5 V, CL= 12 pF –40°C to +125°C 2.7 µs
XTALK Intra-channel crosstalk RS = 50 Ω, RL = 50 Ω, CL = 5 pF,
VS = 200 mVRMS, VBIAS = 0 V, f = 1 MHz		 25°C –100 dB
BW –3 dB bandwidth (WQFN Package) RS = 50 Ω, RL = 50 Ω, CL = 5 pF,
VS = 200 mVRMS, VBIAS = 0 V		 25°C 650 MHz
BW –3 dB bandwidth (TSSOP Package) RS = 50 Ω, RL = 50 Ω, CL = 5 pF,
VS = 200 mVRMS, VBIAS = 0 V		 25°C 590 MHz
ILOSS Insertion loss RS = 50 Ω, RL = 50 Ω, CL = 5 pF,
VS = 200 mVRMS, VBIAS = 0 V, f = 1 MHz		 25°C –0.7 dB
THD+N Total harmonic distortion plus noise RS = 50 Ω, RL = 10 kΩ,
VS = 20 VPP, VBIAS = 0 V,
f = 20 Hz to 20 kHz		 25°C 0.0006 %
CS(ON),
CD(ON)		 Input/Output on-capacitance f = 1 MHz, VS = 0 V 25°C 14 pF
POWER SUPPLY
IDD VDD supply current VDD = VFP = 22 V,
VSS = VFN =  –22 V,
VDR = 0 V, 5 V, or VDD		 25°C 0.32 0.5 mA
–40°C to +85°C 0.5
–40°C to +125°C 0.6
ISS VSS supply current VDD = VFP = 22 V,
VSS = VFN =  –22 V,
VDR = 0 V, 5 V, or VDD		 25°C 0.26 0.4 mA
–40°C to +85°C 0.4
–40°C to +125°C 0.5
IGND GND current VDD = VFP = 22 V, VSS = VFN =  –22 V,
VDR = 0 V, 5 V, or VDD		 25°C 0.07 mA
IFP VFP supply current VDD = VFP = 22 V, VSS = VFN =  –22 V,
VDR = 0 V, 5 V, or VDD		 25°C 10 µA
IFN VFN supply current VDD = VFP = 22 V, VSS = VFN =  –22 V,
VDR = 0 V, 5 V, or VDD		 25°C 10 µA
IDD(FA) VDD supply current under fault VS = ± 60 V,
VDD = VFP = 22 V, VSS = VFN =  –22 V,
VDR = 0 V, 5 V, or VDD		 25°C 0.27 0.5 mA
–40°C to +85°C 0.5
–40°C to +125°C 0.6
ISS(FA) VSS supply current under fault VS = ± 60 V,
VDD = VFP = 22 V, VSS = VFN =  –22 V,
VDR = 0 V, 5 V, or VDD		 25°C 0.2 0.3 mA
–40°C to +85°C 0.3
–40°C to +125°C 0.4
IGND(FA) GND current under fault VS = ± 60 V,
VDD = VFP = 22 V, VSS = VFN =  –22 V,
VDR = 0 V, 5 V, or VDD		 25°C 0.15 mA
IFP(FA) VFP supply current under fault 25°C 10 µA
IFN(FA) VFN supply current under fault 25°C 10 µA
(1) When VS is at a voltage potential, VD is floating, or when VD is at a voltage potential, VS is floating.
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |