米6体育平台手机版

ZHCSQV7A march 2023 – august 2023 TPS2117

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

DRL|8
- MPCS002E

散热焊盘机械数据 (封装 | 引脚)

订购信息

7.4.1 Truth Table

Table 7-1 shows the expected behavior of the TPS2117. Manual mode and priority mode require MODE pin to be connected to source that is within the specification for V_IH,MODE. This can be either one of the VINx sources or an external bias. For manual mode switching, PR1 is to be controlled via an external source to select between the channels. For priority mode, PR1 voltage is set via a resistor divider from VINx sources. For diode mode, voltage on the MODE pin must be within the specification for V_IL,MODE.

Table 7-1 TPS2117 Truth Table

MODE	VIN1	VIN2	PR1	ST	VOUT
VIN1 or external bias ≥ 1 V (Priority/manual mode)	≥ 1.6 V	X⁽¹⁾	≥ V_REF	High	VIN1
	≥ 1.6 V	≥ 1.6 V	< V_REF	Low	VIN2
	< 1.6 V	< 1.6 V	X⁽¹⁾	Low	Hi-Z
	< 1.6 V	X⁽¹⁾	≥ V_REF	Low	Hi-Z
VIN2 or external bias ≥ 1 V (Priority/manual mode)	X⁽¹⁾	≥ 1.6 V	< V_REF	Low	VIN2
	≥ 1.6 V	≥ 1.6 V	≥ V_REF	High	VIN1
	< 1.6 V	< 1.6 V	X⁽¹⁾	Low	Hi-Z
	X⁽¹⁾	< 1.6 V	< V_REF	Low	Hi-Z
External bias ≤ 0.35 V (Diode mode)	X⁽¹⁾	X⁽¹⁾	≥ V_REF	Low	Hi-Z
	> V_IN2 and ≥ 1.6 V	X⁽¹⁾	< V_REF	High	VIN1
	X⁽¹⁾	> V_IN1 and ≥ 1.6 V	< V_REF	Low	VIN2

(1) X = do not care