ZHCSKC1D January   2007  – October 2019 TPS2412 , TPS2413

PRODUCTION DATA.  

  1. 特性
  2. 应用
  3. 说明
    1.     Device Images
      1.      典型应用图
  4. 修订历史记录
  5. Device Comparison Table
  6. Pin Configuration and Functions
    1.     Pin Functions
  7. Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Dissipation Ratings
    7. 7.7 Typical Characteristics
  8. Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Definitions
      2. 8.3.2 TPS2412 vs TPS2413 – MOSFET Control Methods
      3. 8.3.3 N+1 Power Supply – Typical Connection
      4. 8.3.4 Input ORing – Typical Connection
      5. 8.3.5 System Design and Behavior With Transients
      6. 8.3.6 TPS2412 Regulation-Loop Stability
      7. 8.3.7 MOSFET Selection and R(RSET)
      8. 8.3.8 Gate Drive, Charge Pump and C(BYP)
    4. 8.4 Device Functional Modes
  9. Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curves
  10. 10Power Supply Recommendations
    1. 10.1 Recommended Operating Range
    2. 10.2 VDD, BYP, and Powering Options
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12器件和文档支持
    1. 12.1 相关链接
    2. 12.2 社区资源
    3. 12.3 商标
    4. 12.4 静电放电警告
    5. 12.5 Glossary
  13. 13机械、封装和可订购信息

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • D|8
  • PW|8
散热焊盘机械数据 (封装 | 引脚)

Electrical Characteristics

over operating free-air temperature range (unless otherwise noted) (1)(2)(3)(4)(5)(6)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
V(A), V©), VDD
VDD UVLO VDD rising 2.25 2.5 V
Hysteresis 0.25
A current | I(A) |, Gate in active region 0.66 1 mA
| I(A) |, Gate saturated high 0.1
C current | I©) |, V(AC)  ≤ 0.1 V 10 μA
VDD current Worst case, gate in active region 4.25 6 mA
Gate saturated high 1.2
TURNON
TPS2412 forward turnon and regulation voltage 7 10 13 mV
TPS2412 forward turnon / turnoff difference R(RSET) = open 7 mV
TPS2413 forward turnon voltage 7 10 13 mV
TURNOFF
Fast turnoff threshold voltage Gate sinks > 10 mA at V(GATE-A) = 2 V 1 3 5 mV
V(A-C) falling, R(RSET) = open
V(A-C) falling, R(RSET) = 28.7 kΩ –17 –13.25 –10
V(A-C) falling, R(RSET) = 3.24 kΩ –170 –142 –114
Turnoff delay V(A) = 12 V, V(A-C): 20 mV →   –20 mV,
V(GATE-A) begins to decrease
70 ns
Turnoff time V(A) = 12 V, C(GATE-GND) = 0.01 μF, V(A-C):
20 mV →  –20 mV, measure the period to
V(GATE) = V(A)
130 ns
GATE
Gate positive drive voltage, V(GATE-A) VDD = 3 V, V(A-C) = 20 mV 6 7 8 V
5 V ≤ VDD  ≤ 18 V, V(A-C) = 20 mV 9 10.2 12.5
Gate source current V(A-C) = 50 mV, V(GATE-A) = 4 V 250 290 350 μA
Soft turnoff sink current (TPS2412) V(A-C) = 4 mV, V(GATE-A) = 2 V 2 5 mA
Fast turnoff pulsed current, I(GATE) V(A-C) = –0.1 V A
V(GATE) = 8 V 1.75 2.35
V(GATE) = 5 V 1.25 1.75
Period 7.5 12.5 μs
Sustain turnoff current, I(GATE) V(A-C) = –0.1 V, V©)  ≤ VDD, 3 V ≤ VDD   ≤ 18 V,
2 V ≤ V(GATE)  ≤ 18 V
15 19.5 mA
MISCELLANEOUS
Thermal shutdown temperature Temperature rising, TJ 135 °C
Thermal hysteresis 10 °C
[3 V ≤ V(A) ≤ 18 V and V©) = VDD] or [0.8 V ≤ V(A)  ≤ 3 V and 3 V ≤ VDD  ≤ 18 V]
C(BYP) = 2200 pF, R(RSET) = open
–40°C ≤ TJ ≤ 125°C
Positive currents are into pins
Typical values are at 25°C
All voltages are with respect to GND.