At VIN = 12 V, fsw = 400
kHz, unless otherwise stated.
Figure 7-1 IQ VIN Shutdown Current vs Temperature
Figure 7-3 ENABLE/UVLO Thresholds vs Temperature
Figure 7-5 EN Leakage Current vs Temperature
Figure 7-7 VIN(OVP) vs
Temperature
Figure 7-9 LDO_5V Current Limit vs VIN and
Temperature
Figure 7-11 LDO_3V3 Current Limit vs VIN and
Temperature
Figure 7-13 LDO_1V5 Current Limit vs VIN and
Temperature
Figure 7-15 ITVSP(ILIMIT) vs Temperature
Figure 7-17 Boost Peak Current Limit vs Temperature (upper
settings)
Figure 7-19 Buck Peak Current Limit vs Temperature (upper
settings)
Figure 7-21 Buck Negative Current Limit vs Temperature
Figure 7-23 BOOTx OVP vs Temperature
Figure 7-25 fSW Dither Modulation Frequency vs
Temperature
| Target VSNS for Current Limit = 30
mV |
| Current Limiting Engaged |
Figure 7-27 Current Loop Regulation Voltage vs VBUS
and Temperature
Figure 7-29 Cable Voltage Droop Compensation vs
Temperature
Figure 7-31 Cable Voltage Droop Compensation vs
Temperature
Figure 7-33 Buck-boost Output Voltage Regulation vs
Temperature
Figure 7-35 (M0) 24 MHz Oscillator vs Temperature
Figure 7-37 Type-C Cable Detect: IRp vs
Temperature
Figure 7-39 VCONN Power Path: RDS(ON) vs Temperature
Figure 7-41 Type-C Cable Detect & VCONN:
Over-voltage Protection Thresholds vs Temperature
Figure 7-43 USB BC1.2: DM to AGND 15 kΩ Resistance,
RDM_DWN_15k
Figure 7-45 USB BC1.2: DP and DM Pin Over-voltage Protection
Thresholds vs Temperature
| GPIO
2, 3, 5, 6 |
|
IO = ±5 mA |
|
Figure 7-47 GPIO: Output Voltage vs Output Current and
Temperature
| EN = 2 V |
|
USB Port(s) not connected |
| |
Figure 7-2 IQ VIN Standby Current vs Temperature
Figure 7-4 EN Clamp Voltage vs Temperature
Figure 7-6 VIN(UVLO) vs Temperature
Figure 7-8 LDO_5V vs VIN and Temperature
Figure 7-10 LDO_3V3 vs VIN and Temperature
Figure 7-12 LDO_1V5 vs VIN and Temperature
Figure 7-14 VTVSP_PU vs Temperature
Figure 7-16 Buck-Boost Power FET RDS(ON) vs
Temperature
Figure 7-18 Boost Peak Current Limit vs Temperature (lower
settings)
Figure 7-20 Buck Peak Current Limit vs Temperature (lower
settings)
Figure 7-22 BOOTx UVLO vs Temperature
|
|
|
| Percentage Change from Nominal |
Figure 7-24 Buck-Boost Switching Frequency Variation vs
Temperature
| Target VSNS for Current Limit = 10
mV |
| Current Limiting Engaged |
Figure 7-26 Current Loop Regulation Voltage vs VBUS
and Temperature
| Target VSNS for Current Limit = 50
mV |
| Current Limiting Engaged |
Figure 7-28 Current Loop Regulation Voltage vs VBUS
and Temperature
Figure 7-30 Cable Voltage Droop Compensation vs
Temperature
| VIN = 13.5
V |
VBUS = 20 V
(CV) |
ILIMIT = 3.15 A
(CC) |
|
|
|
Figure 7-32 Constant Voltage to Constant Current Transition
Figure 7-34 VBUS Discharge Current vs
Temperature
Figure 7-36 (M0) 100 kHz Oscillator vs Temperature
Figure 7-38 Type-C Cable Detect: RSNK vs
Temperature
Figure 7-40 VCONN Power Path: Current Limit vs Temperature
Figure 7-42 USB BC1.2: DP to DM Shorting Resistance,
RDCP_DAT
Figure 7-44 USB BC1.2: DM to AGND 20 kΩ Resistance,
RDM_DWN_20k
| GPIO
0, 1, 4, 7, 8, 9 |
|
IO = ±2 mA |
|
Figure 7-46 GPIO: Output Voltage vs Output Current and
Temperature
Figure 7-48 GPIO: Input Voltage Thresholds vs
Temperature