米6体育平台手机版

ZHCSK24D July 2019 – July 2021 TPS25832-Q1 , TPS25833-Q1

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

RHB|32
- MPQF130D

散热焊盘机械数据 (封装 | 引脚)

RHB|32
- QFND592

订购信息

8.1 Absolute Maximum Ratings

Voltages are with respect to GND (unless otherwise noted)⁽¹⁾

PARAMETER		MIN	MAX	UNIT
Input voltage	IN to PGND	–0.3	40	V
	OUT to PGND	–0.3	20
	EN to AGND	–0.3	VIN + 0.3
	CSP to AGND	–0.3	20
	CSN to AGND	–0.3	20
	BUS to AGND	–0.3	18
	RT/SYNC to AGND	–0.3	6
	CTRL1 or CTRL2 to AGND	–0.3	6
	AGND to PGND	–0.3	0.3
Output voltage	SW to PGND	–0.3	VIN + 0.3	V
	SW to PGND (less than 10 ns transients)	–3.5	40
	BOOT to SW	–0.3	6
	VCC to AGND	–0.3	6
	LS_GD	–0.3	18
Voltage range	CC1 or CC2 to AGND	–0.3	7	V
	DP_IN, DM_IN to AGND	–0.3	7
	DP_OUT, DM_OUT to AGND (TPS25832-Q1 only)	–0.3	6
	FAULT, POL, LD_DET to AGND	–0.3	6
	THERM_WARN, NTC to AGND (TPS25833-Q1 only)	–0.3	6
	ILIMIT or IMON to AGND	–0.3	6
Pin positive source current, I_VCC	VCC Source Current		5	mA
Pin positive source current, I_SRC	CC1, CC2		Internally Limited	A
Pin positive sink current, I_SNK	CC1, CC2 (while applying VCONN)		1	A
Pin positive sink current, I_SNK	FAULT, POL, LD_DET		Internally Limited	A
Pin positive sink current, I_SNK	THERM_WARN (TPS25833-Q1 only)		Internally Limited	A
I/O current	DP_IN to DP_OUT, or DM_IN to DM_OUT in SDP, CDP (TPS25832-Q1 only)	–100	100	mA
I/O current	DP_IN to DM_IN in DCP Auto Mode (TPS25833-Q1 only)	–35	35	mA
T_J	Junction temperature	-40	150	°C
T_stg	Storage temperature	–65	150	°C

(1) Stresses beyond those listed under Absolute Maximum Rating may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Condition. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.