米6体育平台手机版

ZHCSOR0 August 2021 TPS25868-Q1 , TPS25869-Q1

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

RPQ|25
- MPQF555A

散热焊盘机械数据 (封装 | 引脚)

订购信息

zhcsor0_oa

8.1 Absolute Maximum Ratings

Over the recommended operating junction temperature range of -40°C to +150°C and AGND = PGND (unless otherwise noted)⁽¹⁾

PARAMETER		MIN	MAX	UNIT
Input voltage	IN to PGND	–0.3	40⁽²⁾	V
	IN to SW	–0.3	35
	SENSE to PGND	–0.3	6
	EN to AGND	–0.3	11
	FREQ/SYNC to AGND	–0.3	6
	PA_EN, PB_EN to AGND	–0.3	6
	VSET, ILIM to AGND	-0.3	6
	AGND to PGND	–0.3	0.3
Input voltage	PA_FAULT, PB_FAULT, FAULT to AGND	–0.3	6	V
Output voltage	SW to PGND	–0.3	26	V
	SW to PGND (less than 10 ns transients)	–3.5	35
	BOOT to SW	–0.3	6
	PA_BUS, PB_BUS to PGND	–0.3	6
Voltage range	CC1, CC2, CFG to AGND	–0.3	6	V
	DP, DM to AGND	–0.3	6
	PA_FAULT, PB_FAULT to AGND	–0.3	6
	TS to AGND	–0.3	6
Pin positive sink current, I_SNK	CC1, CC2 (while applying VCONN)		1	A
I/O current	DP to DM in BC1.2 DCP Mode	–35	35	mA
T_J	Junction temperature	-40	150	°C
T_stg	Storage temperature	–65	150	°C

(1) Operation outside the Absolute Maximum Ratings may cause permanent device damage. Absolute Maximum Ratings do not imply functional operation of the device at these or any other conditions beyond those listed under Recommended Operating Conditions. If used outside the Recommended Operating Conditions but within the Absolute Maximum Ratings, the device may not be fully functional, and this may affect device reliability, functionality, performance, and shorten the device lifetime.

(2) VIN rising slew rate below 20 V/ms if in 0 V to 36 V or above transient.