ZHCSD07C November 2014 – February 2019 TPS3701
PRODUCTION DATA.
| PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | |||
|---|---|---|---|---|---|---|---|---|
| VDD | Supply voltage range | 1.8 | 36 | V | ||||
| V(POR) | Power-on reset voltage(1) | VOL ≤ 0.2 V | 0.8 | V | ||||
| VIT–(INA) | INA pin negative input threshold voltage | VDD = 1.8 V to 36 V | 397 | 400 | 403 | mV | ||
| VIT+(INA) | INA pin positive input threshold voltage | VDD = 1.8 V to 36 V | 400 | 405.5 | 413 | mV | ||
| VHYS(INA) | INA pin hysteresis voltage
(HYS = VIT+(INA) – VIT–(INA)) |
2 | 5.5 | 12 | mV | |||
| VIT–(INB) | INB pin negative input threshold voltage | VDD = 1.8 V to 36 V | 387 | 394.5 | 400 | mV | ||
| VIT+(INB) | INB pin positive input threshold voltage | VDD = 1.8 V to 36 V | 397 | 400 | 403 | mV | ||
| VHYS(INB) | INB pin hysteresis voltage
(HYS = VIT+(INB) – VIT–(INB)) |
2 | 5.2 | 12 | mV | |||
| VOL | Low-level output voltage | VDD = 1.8 V, IOUT = 3 mA | 130 | 250 | mV | |||
| VDD = 5 V, IOUT = 5 mA | 150 | 250 | mV | |||||
| IIN | Input current (at INA, INB pins) | VDD = 1.8 V and 36 V, VINA, VINB = 6.5 V | –25 | +1 | +25 | nA | ||
| VDD = 1.8 V and 36 V, VINA, VINB = 0.1 V | –15 | +1 | +15 | nA | ||||
| ID(leak) | Open-drain output leakage current | VDD = 1.8 V and 36 V, VOUT = 25 V | 10 | 300 | nA | |||
| IDD | Supply current | VDD = 1.8 V – 36 V | 8 | 11 | µA | |||
| UVLO | Undervoltage lockout(2) | VDD falling | 1.3 | 1.5 | 1.7 | V | ||