米6体育平台手机版

ZHCSED3B November 2015 – December 2023 TPS3711

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

DDC|6
- MPDS124I

散热焊盘机械数据 (封装 | 引脚)

订购信息

5.5 Electrical Characteristics

Over the operating temperature range of T_J = –40°C to +125°C, 1.8 V ≤ V_DD < 36 V, and pullup resistor RP = 100 kΩ (unless otherwise noted). Typical values are at T_J = 25°C and V_DD = 12 V.

PARAMETER		TEST CONDITIONS	MIN	TYP	MAX	UNIT
V_(POR)	Power-on reset voltage⁽¹⁾	V_OL ≤ 0.2 V			0.8	V
V_IT–	SENSE pin negative input threshold voltage	V_DD = 1.8 V to 36 V	397	400	403	mV
V_IT+	SENSE pin positive input threshold voltage	V_DD = 1.8 V to 36 V	400	405.5	413	mV
V_HYS	SENSE pin hysteresis voltage (HYS = V_IT+ – V_IT–)		2	5.5	12	mV
V_OL	Low-level output voltage	V_DD = 1.8 V, I_OUT = 3 mA		130	250	mV
V_OL	Low-level output voltage	V_DD = 5 V, I_OUT = 5 mA		150	250	mV
I_IN	Input current (at SENSE pin)	V_DD = 1.8 V and 36 V, V_SENSE = 6.5 V	–25	+1	+25	nA
I_IN	Input current (at SENSE pin)	V_DD = 1.8 V and 36 V, V_SENSE = 0.1 V	–15	+1	+15	nA
I_D(leak)	Open-drain leakage current	V_DD = 1.8 V and 36 V, V_OUT = 25 V		10	300	nA
I_DD	Supply current	V_DD = 1.8 V – 36 V		8	11	µA
UVLO	Undervoltage lockout⁽²⁾	V_DD falling	1.3	1.5	1.7	V

(1) The lowest supply voltage (V_DD) at which output is active; t_r(VDD) > 15 µs/V. If less than V_(POR), the output is undetermined.

(2) When V_DD falls below UVLO, OUT is driven low. The output cannot be determined if less than V_(POR).