4 修订历史记录

Changes from C Revision (May 2016) to D Revision

• Added TI 参考设计的顶部导航图标Go
• Added WEBENCH 链接Go
• Changed the minimum value for PH, 10-ns transient from –2 V to –5 VGo

Changes from B Revision (December 2014) to C Revision

• 已通篇将单位“A/V”改为“S”。Go
• Changed the DGQ and DRC package images in Pin Configuration and FunctionsGo
• Deleted 25°C from the Test conditions of Enable threshold voltage in the Electrical CharacteristicsGo
• Changed Figure 9Go
• Changed TPS54360 To: TPS54260 in Figure 27Go
• Changed TPS54360 To: TPS54260 in Figure 28Go
• Added text "Do not place a low-impedance..." and Figure 29 to the Enable and Adjusting Undervoltage Lockout sectionGo
• Changed TPS54360 To: TPS54260 in Figure 42Go
• Changed 350 µA/V To: 310 µS for gm_ea, and 10.5 A/V To: 10.5 S for gm_ps in Figure 46Go
• Changed text From: "yields an input voltage ripple of 206 mV" To: "yields an input voltage ripple of 473 mV" in the Input Capacitor sectionGo

Changes from A Revision (December 2010) to B Revision

• Added 引脚配置和功能部分，ESD 额定值表，特性 描述 部分，器件功能模式，应用和实施部分，电源相关建议部分，布局部分，器件和文档支持部分以及机械、封装和可订购信息部分Go
• 为了清晰起见，已简化首页原理图Go
• Deleted Junction-to-ambient thermal resistance (custom board) from Thermal InformationGo
• Added "the level set" to Fixed Frequency PWM Control descriptionGo

Changes from * Revision (March 2010) to A Revision

• Added 将 10 引脚 3mm × 3mm SON 添加到了 特性 和 说明Go
• Added SON package Go
• Added DRC thermal data to thermal table and deleted dissipation rating tableGo