ZHCSJY4B July 2008 – June 2019 TPS5450-Q1
PRODUCTION DATA.
- 1 特性
- 2 应用
- 3 说明
- 4 修订历史记录
- 5 Pin Configuration and Functions
- 6 Specifications
-
7 Detailed Description
- 7.1 Overview
- 7.2 Functional Block Diagram
- 7.3
Feature Description
- 7.3.1 Oscillator Frequency
- 7.3.2 Voltage Reference
- 7.3.3 Enable (ENA) and Internal Slow Start
- 7.3.4 Undervoltage Lockout (UVLO)
- 7.3.5 Output Feedback (VSENSE) and Internal Compensation
- 7.3.6 Voltage Feedforward
- 7.3.7 Pulse-Width-Modulation (PWM) Control
- 7.3.8 Overcurrent Limiting
- 7.3.9 Overvoltage Protection
- 7.3.10 Thermal Shutdown
-
8 Application Information
- 8.1 Application Information
- 8.2
Typical Application
- 8.2.1 Design Requirements
- 8.2.2
Detailed Design Procedure
- 8.2.2.1 Custom Design With WEBENCH® Tools
- 8.2.2.2 Boost Capacitor (BOOT)
- 8.2.2.3 Switching Frequency
- 8.2.2.4 Input Capacitors
- 8.2.2.5 Output Filter Components
- 8.2.2.6 Output Voltage Setpoint
- 8.2.2.7 Boot Capacitor
- 8.2.2.8 Catch Diode
- 8.2.2.9 Output Voltage Limitations
- 8.2.2.10 Internal Compensation Network
- 8.2.3 Application Curves
- 9 Layout
- 10器件和文档支持
- 11机械、封装和可订购信息
8.2.2.10 Internal Compensation Network
The design equations given in the example circuit can be used to generate circuits using the TPS5450-Q1. These designs are based on certain assumptions and will tend to always select output capacitors within a limited range of ESR values. If a different capacitor type is desired, it may be possible to fit one to the internal compensation of the TPS5450-Q1. Equation 15 gives the nominal frequency response of the internal voltage-mode type III compensation network:
Equation 15. 
where
- Fp0 = 2165 Hz, Fz1 = 2170 Hz, Fz2 = 2590 Hz
- Fp1 = 24 kHz, Fp2 = 54 kHz, Fp3 = 440 kHz
- Fp3 represents the non-ideal parasitics effect
Using this information along with the desired output voltage, feed forward gain and output filter characteristics, the closed loop transfer function can be derived.