ZHCSBY9G July 2013 – June 2021 TPS54561
PRODUCTION DATA
Figure 8-1 illustrates the design of a high frequency switching regulator using ceramic output capacitors. A few parameters must be known in order to start the design process. These requirements are typically determined at the system level. Calculations can be done with the aid of WEBENCH or the excel spreadsheet (SLVC452) located on the product page. This example is designed to the following known parameters:
PARAMETER | VALUE |
---|---|
Output Voltage | 5 V |
Transient response 1.25 A to 3.75 A load step | ΔVOUT = 4 % |
Maximum output current | 5 A |
Input voltage | 12 V nom. 7 V to 60 V |
Output voltage ripple | 0.5% of VOUT |
Start input voltage (rising VIN) | 6.5 V |
Stop input voltage (falling VIN) | 5 V |