ZHCSIC0A September   2018  – November 2018 TPS61088-Q1

PRODUCTION DATA.  

  1. 1 特性
  2. 2 应用
  3. 3 说明
    1.     Device Images
      1.      典型应用电路
  4. 4 修订历史记录
  5. 5 （说明 （续））
  6. 6 Pin Configuration and Functions
    1.     Pin Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Typical Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Enable and Start-up
      2. 8.3.2 Undervoltage Lockout (UVLO)
      3. 8.3.3 Adjustable Switching Frequency
      4. 8.3.4 Adjustable Peak Current Limit
      5. 8.3.5 Overvoltage Protection
      6. 8.3.6 Thermal Shutdown
    4. 8.4 Device Functional Modes
      1. 8.4.1 Operation
        1. 8.4.1.1 PWM Mode
        2. 8.4.1.2 PFM Mode
  9. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 Custom Design with WEBENCH Tools
        2. 9.2.2.2 Setting Switching Frequency
        3. 9.2.2.3 Setting Peak Current Limit
        4. 9.2.2.4 Setting Output Voltage
        5. 9.2.2.5 Inductor Selection
        6. 9.2.2.6 Input Capacitor Selection
        7. 9.2.2.7 Output Capacitor Selection
        8. 9.2.2.8 Loop Stability
      3. 9.2.3 Application Curves
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
    3. 11.3 Thermal Considerations
  12. 12器件和文档支持
    1. 12.1 器件支持
      1. 12.1.1 第三方米6体育平台手机版_好二三四免责声明
      2. 12.1.2 开发支持
        1. 12.1.2.1 使用 WEBENCH 工具创建定制设计
    2. 12.2 接收文档更新通知
    3. 12.3 社区资源
    4. 12.4 商标
    5. 12.5 静电放电警告
    6. 12.6 术语表
  13. 13机械、封装和可订购信息

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

7.5 Electrical Characteristics

Minimum and maximum values are at VIN = 2.7 V to 12 V and TJ = -40°C to 125°C. Typical values are at VIN = 3.6 V and TJ = 25°C
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
POWER SUPPLY
VIN Input voltage range 2.7 12 V
VIN_UVLO Undervoltage lockout (UVLO) threshold VIN rising 2.7 V
VIN falling 2.4 2.5 V
VIN_HYS VIN UVLO hysteresis 200 mV
VCC_UVLO UVLO threshold VCC falling 2.1 V
IQ Operating quiescent current from the VIN pin IC enabled, VEN = 2 V, no load, RILIM = 100 kΩ , VFB = 1.3 V, VOUT = 12 V, TJ up to 125°C 1 3 µA
Operating quiescent current from the VOUT pin 110 250 µA
ISD Shutdown current into the VIN pin IC disabled, VEN = 0 V, no load, no feedback resistor divider connected to the VOUT pin, TJ up to 125°C 1 3.5 µA
VCC VCC regulation IVCC = 5 mA, VIN = 8 V 5.8 V
EN AND MODE INPUT
VENH EN high threshold voltage VCC = 6 V 1.2 V
VENL EN low threshold voltage VCC = 6 V 0.4 V
REN EN internal pull-down resistance VCC = 6 V 800 kΩ
VMODEH MODE high threshold voltage VCC = 6 V 4.0 V
VMODEL MODE low threshold voltage VCC = 6 V 1.5 V
RMODE MODE internal pull-up resistance VCC = 6 V 800 kΩ
OUTPUT
VOUT Output voltage range 4.5 12.6 V
VREF Reference voltage at the FB pin PWM mode 1.186 1.204 1.222 V
PFM mode 1.212
ILKG_FB FB pin leakage current VFB = 1.2 V 100 nA
ISS Soft-start charging current 5 μA
ERROR AMPLIFIER
ISINK COMP pin sink current VFB = VREF +200 mV, VCOMP = 1.5 V 20 µA
ISOURCE COMP pin source current VFB = VREF –200 mV, VCOMP = 1.5 V 20 µA
VCCLPH High clamp voltage at the COMP pin VFB = 1 V, RILIM = 49.9 kΩ 2.3 V
VCCLPL Low clamp voltage at the COMP pin VFB = 1.5 V, RILIM = 49.9 kΩ, MODE pin floating 1.4
GEA Error amplifier transconductance VCOMP = 1.5 V 190 µA/V
POWER SWITCH
RDS(on) High-side MOSFET on-resistance VCC = 6 V 19.5 29.7 mΩ
Low-side MOSFET on-resistance VCC = 6 V 18.0 27.5 mΩ
CURRENT LIMIT
ILIM Peak switch current limit in PFM mode RILIM = 49.9 kΩ, VCC = 6 V, MODE pin floating 10.0 11.4 13.0 A
Peak switch current limit in FPWM mode RILIM = 49.9 kΩ, VCC = 6 V, MODE pin short to ground 7.2 8.7 10.5 A
VILIM Reference voltage at the ILIM pin 0.6 V
SWITCHING FREQUENCY
ƒSW Switching frequency RFREQ =301 kΩ, VIN = 5.0 V, VOUT = 9.0 V 500 kHz
RFREQ =53.6 kΩ, VIN = 5.0 V, VOUT = 9.0 V 2000 kHz
tON_min Minimum on-time RFREQ =301 kΩ, VIN = 5.0 V, VOUT = 9.0 V 90 160 ns
PROTECTION
VOVP Output overvoltage protection threshold VOUT rising 12.7 13.2 13.6 V
VOVP_HYS Output overvoltage protection hysteresis VOUT falling below VOVP 0.25 V
THERMAL SHUTDOWN
TSD Thermal shutdown threshold TJ rising 150 °C
TSD_HYS Thermal shutdown hysteresis TJ falling below TSD 20 °C
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |