5 修订历史记录
Changes from D Revision (March 2013) to E Revision
-
Added ESD 额定值表,特性 描述部分,器件功能模式,应用和实施部分,电源相关建议部分,布局部分,器件和文档支持部分以及机械、封装和可订购信息部分Go
Changes from C Revision (September 2012) to D Revision
-
Changed the PS pin description From: Enable/disable Power Save mode (High = enabled, Low = disabled) To: Enable/disable Power Save mode (High = disabled, Low = enabled)Go
Changes from B Revision (FEBRUARY 2008) to C Revision
-
已将特性从“小型 3mm x 3mm QFN-10 封装”改为“小型 3mm x 3mm SON-10 封装”Go
-
将应用从:白光 LED 改为:白光 LED 驱动器Go
-
Changed the Available Device Options Package type From: 10-PIN QFN To: 10-Pin SONGo
-
Changed VSS to VIN in the Recommended Operating Conditions tableGo
-
Changed From: DISSIPATION RATINGS TABLE To: Thermal Information table Go
-
Changed the Parameters and Test Conditions in the Electrical Characteristics table Go
-
Updated Figure 1 through Figure 11Go
-
Added C3 to the List of ComponentsGo
-
Added text to the Input Capacitor section "An R-C filter may be placed..."Go
-
Added Figure 26, Figure 27, and Figure 28Go
-
Added Figure 29Go
Changes from A Revision (JUNE 2007) to B Revision
-
Added DSC package and tape and reel note to the Available Device Options.Go
Changes from * Revision (MARCH 2007) to A Revision
-
Changed 特性 要点从“600mA 输出电流,3.3V (VIN ≥ 1.2V) 时”改为“300mA 输出电流,3.3V (VIN ≥ 2.4V) 时”Go
-
Changed Figure 6 label From: Power Save Disabled To: Power Save Enabled Go
-
Changed Figure 7 label From: Power Save Enabled To: Power Save Disabled Go