米6体育平台手机版

ZHCSB84F November 2011 – November 2021 TPS62130 , TPS62130A , TPS62131 , TPS62132 , TPS62133

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

RGT|16
- MPQF119H

散热焊盘机械数据 (封装 | 引脚)

RGT|16
- QFND098S

订购信息

9.2.2.2 External Component Selection

The external components have to fulfill the needs of the application, but also the stability criteria of the devices control loop. The TPS6213x is optimized to work within a range of external components. The inductance of the LC output filter and capacitance have to be considered together, creating a double pole, responsible for the corner frequency of the converter (see Section 9.2.2.4). Table 9-2 can be used to simplify the output filter component selection. Checked cells represent combinations that are proven for stability by simulation and lab test. Further combinations should be checked for each individual application. See Optimizing the TPS62130/40/50/60 Output Filter Application Report for details.

Table 9-2 Recommended LC Output Filter Combinations

	10 µF	22 µF	47 µF	100 µF	200 µF
0.47 µH⁽¹⁾
1 µH⁽¹⁾		√	√	√	√
2.2 µH⁽¹⁾	√	√⁽²⁾	√	√	√
3.3 µH⁽¹⁾	√	√	√	√
4.7 µH⁽¹⁾

(1) The values in the table are nominal values. The effective capacitance was considered to vary by +20% and -50%.

(2) This LC combination is the standard value and recommended for most applications.

The TPS6213x can be run with an inductor as low as 1 µH. FSW should be set Low in this case. However, for applications running with the low frequency setting (FSW = High) or with low input voltages, 2.2 µH is recommended.