over operating junction temperature range (unless otherwise noted) | MIN | NOM | MAX | UNIT |
---|
VIN | Supply voltage range | 3 | | 17 | V |
VOUT | Output voltage range | 0.8 | | 12 | V |
L | Effective inductance | 0.6 | 1 | 2.9 | µH |
CO | Effective output capacitance(1) | 6 | 22 | 200(3) | µF |
CI | Effective input capacitance(1)(2) | 3 | 10 | | µF |
TJ | Operating junction temperature | -40 | | +125 | °C |
(1) Due to the dc bias effect of ceramic capacitors, the effective capacitance is lower then the nominal value when a voltage is applied. This is why the capacitance is specified to allow the selection of the smallest capacitor required with the dc bias effect for this type of capacitor in mind. The nominal value given matches a typical capacitor to be chosen to meet the minimum capacitance required.
(2) Larger values may be required if the source impedance can not support the transient requirements of the load.
(3) This is for capacitors directly at the output of the TPS62135x. More capacitance is allowed if there is a series resistance associated to the capacitors. See also the systems examples
Section 10.3.2 for applications where many distributed capacitors are connected to the output.