This device has pulldown circuitry connected to V_OUT. This circuitry is a 100-μA current sink, in series with a
5.5-kΩ resistor, controlled by V_EN. When V_EN is below V_EN(LOW), the pulldown circuitry is disabled and the LDO output is in high-impedance mode.

If the output voltage is more than 2% above nominal voltage when V_EN ≥ V_EN(LOW), the pulldown circuitry turns on and the output is pulled down until the output voltage is within 2% from the nominal voltage. This feature helps reduce overshoot during the transient response.