The device regulates to the nominal output voltages when the following conditions are met:

• The input voltage is greater than the nominal output voltage plus the dropout voltage on either rails (V_{MID_OUT(nom)} + V_{DO(MID_OUT)} and V_OUT(nom) +V_DO(OUT))
• The current sourced from either MID_OUT and OUT is less than the respective current limit specified in the Section 6.5 table for each rail
• The device junction temperature is less than the thermal shutdown temperature (T_J < T_SD(shutdown))
• The enable voltage has previously exceeded the V_EN(HI) (maximum) threshold and has not yet decreased to less than the V_EN(LOW) minimum threshold
• V_IN has exceeded 4 V if the EN pin is left floating