at T_J = 25°C, V_IN = V_OUT(TARGET) + 0.3 V, I_OUT = 25 mA, V_(EN) = V_IN, C_IN = 10 μF, C_OUT = 10 μF, C_(SS) = 10 nF, and the PG pin pulled up to V_IN with a 100-kΩ pullup resistor (unless otherwise noted)

Figure 5-1 Load Regulation (0.9 V, Adjustable)

Figure 5-3 Load Regulation (0.9 V, Fixed By Setting Pins)

Figure 5-5 Dropout Voltage vs Output Current

Figure 5-7 Line Regulation (0.9 V, Adjustable)

Figure 5-9 Line Regulation (0.9 V, Fixed By Setting Pins)

Figure 5-11 Measured Output Voltage vs Pin Setting

Figure 5-13 GND Pin Current vs Output Current

Figure 5-15 GND Pin Current In Shutdown vs Temperature

Figure 5-17 Power-Good Threshold Voltage vs Temperature

Figure 5-19 Noise Spectral Density By Output Voltage

Figure 5-21 Power-Supply Ripple Rejection vs Frequency

Figure 5-23 Load Transient Response (V_OUT = 3.3 V)

Figure 5-2 Load Regulation (5.0 V, Adjustable)

Figure 5-4 Load Regulation (3.5 V, Fixed By Setting Pins)

Figure 5-6 Dropout Voltage vs Temperature

Figure 5-8 Line Regulation (5 V, Adjustable)

Figure 5-10 Line Regulation (3.5 V, Fixed By Setting Pins)

Figure 5-12 Accuracy vs Pin Setting

Figure 5-14 GND Pin Current vs Input Voltage

Figure 5-16 Current Limit vs Output Voltage (Foldback)

Figure 5-18 Power-Good Pin Drive Capability

Figure 5-20 Noise Spectral Density By External Capacitors

Figure 5-22 Load Transient Response (V_OUT = 1.2 V)