ZHCSJG2A March   2019  – September 2019 TPS7A78

PRODUCTION DATA.  

  1. 1 特性
  2. 2 应用
  3. 3 说明
    1.     Device Images
      1.      半桥配置典型原理图
      2.      全桥配置典型原理图
  4. 4 修订历史记录
  5. 5 Pin Configuration and Functions
    1.     Pin Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Timing Requirements
    7. 6.7 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Active Bridge Control
      2. 7.3.2 Full-Bridge (FB) and Half-Bridge (HB) Configurations
      3. 7.3.3 4:1 Switched-Capacitor Voltage Reduction
      4. 7.3.4 Undervoltage Lockout Circuits (VUVLO_SCIN) and (VUVLO_LDO_IN)
      5. 7.3.5 Dropout Voltage Regulation
      6. 7.3.6 Current Limit
      7. 7.3.7 Programmable Power-Fail Detection
      8. 7.3.8 Power-Good (PG) Detection
      9. 7.3.9 Thermal Shutdown
    4. 7.4 Device Functional Modes
      1. 7.4.1 Normal Operation
      2. 7.4.2 Dropout Mode
      3. 7.4.3 Disabled Mode
  8. 8 Application and Implementation
    1. 8.1 Application Information
      1. 8.1.1 Recommended Capacitor Types
      2. 8.1.2 Input and Output Capacitors Requirements
      3. 8.1.3 Startup Behavior
      4. 8.1.4 Load Transient
      5. 8.1.5 Standby Power and Output Efficiency
      6. 8.1.6 Reverse Current
      7. 8.1.7 Switched-Capacitor Stage Output Impedance
      8. 8.1.8 Power Dissipation (PD)
      9. 8.1.9 Estimating Junction Temperature
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1 Calculating the Cap-Drop Capacitor CS
          1. 8.2.2.1.1 CS Calculations for the Typical Design
        2. 8.2.2.2 Calculating the Surge Resistor RS
          1. 8.2.2.2.1 RS Calculations for the Typical Design
        3. 8.2.2.3 Checking for the Device Maximum ISHUNT Current
          1. 8.2.2.3.1 ISHUNT Calculations for the Typical Design
        4. 8.2.2.4 Calculating the Bulk Capacitor CSCIN
          1. 8.2.2.4.1 CSCIN Calculations for the Typical Design
        5. 8.2.2.5 Calculating the PFD Pin Resistor Dividers for a Power-Fail Detection
          1. 8.2.2.5.1 PFD Pin Resistor Divider Calculations for the Typical Design
        6. 8.2.2.6 Summary of the Typical Application Design Components
      3. 8.2.3 Application Curves
  9. 9 Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11器件和文档支持
    1. 11.1 器件支持
      1. 11.1.1 开发支持
        1. 11.1.1.1 评估模块
        2. 11.1.1.2 SIMPLIS 模型
      2. 11.1.2 器件命名规则
    2. 11.2 文档支持
      1. 11.2.1 相关文档
    3. 11.3 接收文档更新通知
    4. 11.4 社区资源
    5. 11.5 商标
    6. 11.6 静电放电警告
    7. 11.7 Glossary
  12. 12机械、封装和可订购信息

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

6.5 Electrical Characteristics

VSCIN(1) = 4 (VLDO_OUT (nom) + 0.6 V) + 1 V or 17 V (whichever is greater), CSCIN = 10 µF, CS1 = 1.0 µF, CS2 = 2.2 µF , CLDO_IN = 10 µF, CLDO_OUT = 1.0 µF, and IOUT = 1 mA (unless otherwise noted);typical values are at TJ = 25°C(2)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
VUVLO_SCIN UVLO_SCIN threshold rising VSCIN rising, VLDO_OUT(nom) ≤ 3.4 V  17 V
VUVLO_LDO_IN UVLO_LDO_IN threshold rising VSCIN rising 3.9 V
UVLO_LDO_IN threshold falling VSCIN falling 3.5 V
ΔVLDO_OUT(ΔIOUT) Load regulation 0 mA ≤ IOUT  ≤ 120 mA 0.21 mV/mA
VLDO_OUT Output voltage accuracy VSCIN(1)(3) = 4 (VLDO_OUT (nom) + 0.6 V) + 3 V,                                           0 mA ≤ IOUT  ≤ 120 mA  –2 1 2 %
ICL Output current limit VLDO_OUT = 0.9 x VLDO_OUT(nom) 145 215 300 mA
IDD_SCIN SCIN pin quiescent current VLDO_OUT(nom) = 3.3 V, IOUT = 0 mA, no R3, R4 280 µA
VRipple Output voltage ripple VAC = 120 V, 60 Hz, FB, CS = 1.0 µF, CSCIN = 180 µF, VLDO_OUT(nom) = 5 V, IOUT = 10 mA,                                                                                               scope BW = 10 MHz 3 mV
VIT(PFD,RISING) PFD pin rising threshold VPFD rising, R4 = 100 kΩ 1.24 1.42 V
VIT(PFD,FALLING) PFD pin falling threshold VPFD falling, R4 = 100 kΩ 1.17 1.25
VHYS(PFD) PFD pin hysteresis 110 mV
VIT(PG,RISING) PG pin rising threshold R3 = 100 kΩ, VSCIN rising 90.16 92 93.84 %VLDO_OUT
VIT(PG,FALLING) PG pin falling threshold R3 = 100 kΩ 88.5 90 91.5
VHYS(PG) PG pin hysteresis 2
VOL(PF),(PG) PF and PG pins low-level ouput voltage  IPF,PG = 500 µA 0.2 V
ILKG(PF),(PG) PF and PG pins open-drain leakage current VPF,PG = 5 V 50 nA
TSD(Shutdown) Thermal shutdown temperature Shutdown, temperature increasing 162 ℃
TSD(Reset) Thermal shutdown reset temperature Reset, temperature decreasing 135
(1) For VLDO_OUT > 4.4 V, VSCIN is limited to 24 V for testing purposes only.
(2) Electrcial characterestic data tested in DC supply mode equivalent to VSCIN voltage under AC supply mode.
(3) VSCIN ≥ 19 V.  
千亿体育app官网登录(中国)官方网站IOS/安卓通用版/手机APP | 米乐app下载官网（中国）|ios|Android/通用版APP最新版 | 米乐|米乐·M6（中国大陆）官方网站 | 千亿体育登陆地址 | 华体会体育（中国）HTH·官方网站 | 千赢qy国际_全站最新版千赢qy国际V6.2.14安卓/IOS下载 | 18新利网v1.2.5|中国官方网站 | bob电竞真人（中国官网）安卓/ios苹果/电脑版【1.97.95版下载】 | 千亿体育app官方下载(中国)官方网站IOS/安卓/手机APP下载安装 |