V_IN = V_OUT(NOM) + 0.5 V, V_EN = 1.8 V, C_IN = 10 µF, C_NR/SS = 4.7 μF, C_OUT = 10 μF, and I_OUT = 1 mA (unless otherwise noted); typical values are at T_J = 25°C

CNR/SS = 4.7 μF, COUT = 10 μF, VIN = 1.7 V

Figure 6-1 PSRR vs Frequency and I_OUT for V_OUT = 1.2 V

CNR/SS = 4.7 μF, COUT = 10 μF, VIN = 3.8 V

Figure 6-3 PSRR vs Frequency and I_OUT for V_OUT = 3.3 V

CNR/SS = 4.7 μF, COUT = 10 μF, VIN = VOUT + 0.5 V, IOUT = 750 mA

Figure 6-5 PSRR vs Frequency and Input Pairs

VOUT = 3.3 V, CNR/SS = 4.7 μF, COUT = 10 μF

Figure 6-7 PSRR vs Frequency for Operating Headroom (V_OpHr) and I_OUT

VOUT = 3.3 V, CNR/SS = 4.7 μF, COUT = 10 μF

Figure 6-9 PSRR vs Frequency for Operating Headroom (V_OpHr) and I_OUT

COUT = 10 μF, VIN = 3.8 V, VOUT = 3.3 V, IOUT = 250 mA

Figure 6-11 PSRR vs Frequency and C_NR/SS

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VIN = VOUT + 0.5 V, VOUT = 3.3 V, IOUT = 750 mA (10 Hz–100 kHz)

Figure 6-13 Output Voltage Noise (RMS) vs Output Voltage

CIN = COUT = 10 μF, CNR/SS = 4.7 μF (10 Hz–100 kHz)

Figure 6-15 Output Voltage Noise Density vs Frequency for I_OUT and V_OUT = 1.2 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF (10 Hz–100 kHz)

Figure 6-17 Output Voltage Noise Density vs Frequency for I_OUT and V_OUT = 3.3 V

CIN = COUT = 10 μF, IOUT = 500 mA (10 Hz–100 kHz)

Figure 6-19 Output Noise vs C_NR/SS for V_OUT = 3.3 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 0 mA (10 Hz–100 kHz)

Figure 6-21 Output Voltage Noise Density vs Frequency and C_OUT for V_OUT = 3.3 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VIN = 1.7 V, SR = 1 A/μs

Figure 6-23 Load Transient Response for
V_OUT = 1.2 V, I_OUT = 100 mA to 500 mA

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VIN = 3.8 V, SR = 1 A/μs

Figure 6-25 Load Transient Response for
V_OUT = 3.3 V, I_OUT = 100 mA to 500 mA

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VIN = 5.7 V, SR = 1 A/μs

Figure 6-27 Load Transient Response for
V_OUT = 5.2 V, I_OUT = 100 mA to 500 mA

CIN = COUT = 10 μF, CNR/SS = 4.7 μF

Figure 6-29 Line Transient Response for V_OUT = 1.2 V, I_OUT = 500 mA

CIN = COUT = 10 μF, CNR/SS = 4.7 μF

Figure 6-31 Line Transient Response for V_OUT = 3.3 V, I_OUT = 500 mA

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VOUT = 3.3 V

Figure 6-33 Start-Up Waveform for I_OUT = 500 mA

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VOUT = 3.3 V

Figure 6-35 Shutdown Waveform for UVLO_(IN)

CIN = COUT = 10 μF, IOUT = 0 mA, VIN = 3.8 V, VOUT = 3.3 V

Figure 6-37 Inrush Current for C_NR/SS = 1.0 μF

CIN = COUT = 10 μF, IOUT = 0 mA, VIN = 3.8 V, VOUT = 3.3 V

Figure 6-39 Inrush Current for C_NR/SS = 4.7 μF

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 1 A

Figure 6-41 Dropout Voltage vs V_IN for I_OUT = 1 A

CIN = COUT = 10 μF, CNR/SS = 4.7 μF

Figure 6-43 Dropout Voltage vs I_OUT for V_OUT = 3.3 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VIN = 5.7 V, IOUT = 1 mA

Figure 6-45 I_NR/SS Distribution

CIN = COUT = 10 μF, CNR/SS = 4.7 μF

Figure 6-47 I_NR/SS Load Regulation

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 1 mA

Figure 6-49 I_NR/SS Line Regulation

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 0 mA

Figure 6-51 I_NR/SS vs V_NR/SS and Temperature

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VOUT = 0.7 V

Figure 6-53 I_NR/SS vs I_OUT and Temperature for V_IN = 1.2 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VOpHr = 500 mV

Figure 6-55 I_NR/SS vs I_OUT and Temperature for V_IN = 1.8 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VOpHr = 500 mV

Figure 6-57 I_NR/SS vs I_OUT and Temperature for V_IN = 3.3 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VOpHr = 500 mV

Figure 6-59 I_NR/SS vs I_OUT and Temperature for V_IN = 5.1 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 1 mA

Figure 6-61 I_NR/SS vs V_IN and Temperature for V_OUT = 1.2 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 1 mA

Figure 6-63 I_NR/SS vs V_IN and Temperature for V_OUT = 1.8 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 1 mA

Figure 6-65 I_NR/SS vs V_IN and Temperature for V_OUT = 3.3 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 1 mA

Figure 6-67 I_NR/SS vs V_IN and Temperature for V_OUT = 5.1 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 1 mA

Figure 6-69 I_NR/SS vs Temperature for V_{IN_Min}, V_OpHr = 0.2 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 1 mA

Figure 6-71 I_NR/SS Fast-Start vs V_IN and Temperature

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VIN = 3.8 V

Figure 6-73 GND Pin Current vs I_OUT and Temperature for
V_OUT = 3.3 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VIN = 5.7 V, IOUT = 1 mA

Figure 6-75 GND Pin Current vs V_NR/SS and Temperature

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VOUT = VIN – 0.5 V

Figure 6-77 GND Pin Current vs V_IN and Temperature for
I_OUT = 500 mA

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 0 mA, VOUT = 3.3 V

Figure 6-79 GND Pin Current vs V_EN and Temperature for
V_IN = 1.7 V (Dropout Operation)

CIN = COUT = 10 μF, CNR/SS = 4.7 μF

Figure 6-81 100% Current Limit vs Temperature for V_OUT = 0.4 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF

Figure 6-83 100% Current Limit vs Temperature for V_OUT = 1.2 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF

Figure 6-85 100% Current Limit vs Temperature for V_OUT = 3.3 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF

Figure 6-87 80% Current Limit vs Temperature for V_OUT = 1.2 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF

Figure 6-89 80% Current Limit vs Temperature for V_OUT = 3.3 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF

Figure 6-91 60% Current Limit vs Temperature for V_OUT = 1.2 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF

Figure 6-93 60% Current Limit vs Temperature for V_OUT = 3.3 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 0 mA

Figure 6-95 UVLO_IN vs Temperature

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 0 mA

Figure 6-97 EN Pin Current vs Enable Voltage and Temperature for V_IN = 1.7 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 0 mA

Figure 6-99 V_{FB_PG} Hysteresis and Threshold vs Temperature

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IPG = –1 mA, VIN = 1.7 V, IOUT = –1 mA

Figure 6-101 V_PG Low-Level Output Voltage vs Temperature

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 0 mA

Figure 6-103 FB_PG to PG Pin Rising and Falling Delay vs Temperature

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 0 mA

Figure 6-105 Shutdown Current vs V_IN and Temperature

CNR/SS = 4.7 μF, COUT = 10 μF, VIN = 2.3 V

Figure 6-2 PSRR vs Frequency and I_OUT for V_OUT = 1.8 V

CNR/SS = 4.7 μF, COUT = 10 μF, VIN = 5.5 V

Figure 6-4 PSRR vs Frequency and I_OUT for V_OUT = 5.0 V

CNR/SS = 4.7 μF, COUT = 10 μF, VIN = VOUT + VOpHr, VOUT = 3.3 V, IOUT = 750 mA

Figure 6-6 PSRR vs Frequency for Operating Headroom (V_OpHr)

VOUT = 3.3 V, CNR/SS = 4.7 μF, COUT = 10 μF

Figure 6-8 PSRR vs Frequency for Operating Headroom (V_OpHr) and I_OUT

VOUT = 3.3 V, CNR/SS = 4.7 μF, COUT = 10 μF

Figure 6-10 PSRR vs Frequency for Operating Headroom (V_OpHr) and I_OUT

CNR/SS = 4.7 μF, VIN = 3.8 V, VOUT = 3.3 V, IOUT = 750 mA

Figure 6-12 PSRR vs Frequency and C_OUT

CIN = COUT = 10 μF, IOUT = 750 mA (10 Hz–100 kHz)

Figure 6-14 Output Voltage Noise (RMS) vs C_NR/SS

CIN = COUT = 10 μF, CNR/SS = 4.7 μF (10 Hz–100 kHz)

Figure 6-16 Output Voltage Noise Density vs Frequency for I_OUT and V_OUT = 1.8 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF (10 Hz–100 kHz)

Figure 6-18 Output Voltage Noise Density vs Frequency for I_OUT and V_OUT = 5.0 V

CIN = COUT = 10 μF, IOUT = 750 mA (10 Hz–100 kHz)

Figure 6-20 Output Voltage Noise (RMS) vs C_NR/SS for
V_OUT = 3.3 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 750 mA (10 Hz–100 kHz)

Figure 6-22 Output Voltage Noise Density vs Frequency and Input Pairs

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VIN = 1.7 V, SR = 1 A/μs

Figure 6-24 Load Transient Response for
V_OUT = 1.2 V, I_OUT = 100 mA to 1 A

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VIN = 3.8 V, SR = 1 A/μs

Figure 6-26 Load Transient Response for
V_OUT = 3.3 V, I_OUT = 100 mA to 1 A

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VIN = 5.7 V, SR = 1 A/μs

Figure 6-28 Load Transient Response for
V_OUT = 5.2 V, I_OUT = 100 mA to 1 A

CIN = COUT = 10 μF, CNR/SS = 4.7 μF

Figure 6-30 Line Transient Response for V_OUT = 1.2 V, I_OUT = 1 A

CIN = COUT = 10 μF, CNR/SS = 4.7 μF

Figure 6-32 Line Transient Response for V_OUT = 3.3 V, I_OUT = 1 A

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VOUT = 3.3 V

Figure 6-34 Start-Up Waveform for I_OUT = 1 A

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VOUT = 3.3 V

Figure 6-36 Shutdown Waveform With EN

CIN = COUT = 10 μF, IOUT = 0 mA, VIN = 3.8 V, VOUT = 3.3 V

Figure 6-38 Inrush Current for C_NR/SS = 2.2 μF

CIN = COUT = 10 μF, IOUT = 0 mA, VIN = 3.8 V, VOUT = 3.3 V

Figure 6-40 Inrush Current for C_NR/SS = 10 μF

CIN = COUT = 10 μF, CNR/SS = 4.7 μF

Figure 6-42 Dropout Voltage vs I_OUT for V_OUT = 1.8 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF

Figure 6-44 Dropout Voltage vs I_OUT for V_OUT = 5.1 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VIN = 5.7 V, VOUT = 5.1 V, IOUT = 1 mA

Figure 6-46 V_OS Distribution

CIN = COUT = 10 μF, CNR/SS = 4.7 μF

Figure 6-48 V_OS Load Regulation

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 1 mA

Figure 6-50 V_OS Line Regulation

CIN = COUT = 10 μF, CNR/SS = 4.7 μF

Figure 6-52 V_OS vs V_NR/SS and Temperature

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VOUT = 0.7 V

Figure 6-54 V_OS vs I_OUT and Temperature for V_IN = 1.2 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VOpHr = 500 mV

Figure 6-56 V_OS vs I_OUT and Temperature for V_IN = 1.8 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VOpHr = 500 mV

Figure 6-58 V_OS vs I_OUT and Temperature for V_IN = 3.3 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VOpHr = 500 mV

Figure 6-60 V_OS vs I_OUT and Temperature for V_IN = 5.1 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 1 mA

Figure 6-62 V_OS vs V_IN and Temperature for V_OUT = 1.2 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 1 mA

Figure 6-64 V_OS vs V_IN and Temperature for V_OUT = 1.8 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 1 mA

Figure 6-66 V_OS vs V_IN and Temperature for V_OUT = 3.3 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 1 mA

Figure 6-68 V_OS vs V_IN and Temperature for V_OUT = 5.1 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 1 mA

Figure 6-70 V_OS vs Temperature for V_{IN_Min}, V_OpHr = 0.2 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VIN = 1.7 V

Figure 6-72 GND Pin Current vs I_OUT and Temperature for
V_OUT = 1.2 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VIN = 5.6 V

Figure 6-74 GND Pin Current vs I_OUT and Temperature for
V_OUT = 5.1 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VOpHr = 500 mV

Figure 6-76 GND Pin Current vs V_IN and Temperature for
I_OUT = 1 mA

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, VOUT = VIN – 0.5 V

Figure 6-78 GND Pin Current vs V_IN and Temperature for
I_OUT = 1 A

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 0 mA, VOUT = 3.3 V

Figure 6-80 GND Pin Current vs V_EN and Temperature for
V_IN = 5.7 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF

Figure 6-82 100% Current Limit vs Temperature for V_OUT = 0.8 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF

Figure 6-84 100% Current Limit vs Temperature for V_OUT = 1.8 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF

Figure 6-86 100% Current Limit vs Temperature for V_OUT = 5.1 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF

Figure 6-88 80% Current Limit vs Temperature for V_OUT = 1.8 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF

Figure 6-90 80% Current Limit vs Temperature for V_OUT = 5.1 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF

Figure 6-92 60% Current Limit vs Temperature for V_OUT = 1.8 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF

Figure 6-94 60% Current Limit vs Temperature for V_OUT = 5.1 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 0 mA

Figure 6-96 V_EN Hysteresis and Threshold vs Temperature

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 0 mA

Figure 6-98 EN Pin Current vs Enable Voltage and Temperature for V_IN = 5.7 V

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 0 mA

Figure 6-100 FB_PG Pin Current vs V_IN and Temperature

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 0 mA

Figure 6-102 PG Pin Current vs V_IN and Temperature

CIN = COUT = 10 μF, CNR/SS = 4.7 μF, IOUT = 0 mA

Figure 6-104 NR/SS and OUT Pulldown Resistors vs Temperature