米6体育平台手机版

ZHCSGE1A July 2017 – August 2017 TPSM84203 , TPSM84205 , TPSM84212

PRODUCTION DATA.

封装选项

机械数据 (封装 | 引脚)

EAB|3
- MPSS098C

散热焊盘机械数据 (封装 | 引脚)

订购信息

zhcsge1a_oa

6.5 Electrical Characteristics

Over -40°C to +85°C free-air temperature range, V_IN = 24 V, I_OUT = I_OUT max, F_SW = 400 kHz, C_IN = 0.1µF, 50V ceramic; 10µF, 50V ceramic; 100µF, 35V electrolytic, and C_OUT = 2 x 47µF, 16V 1210 ceramic (unless otherwise noted)

PARAMETER		TEST CONDITIONS		MIN	TYP	MAX	UNIT
INPUT VOLTAGE (VIN)
V_IN	Input voltage range	Over V_OUT range	TPSM84203	4.5⁽¹⁾		28	V
			TPSM84205	7⁽¹⁾		28	V
			TPSM84212	14.5⁽¹⁾		28	V
V_{IN_UVLO}	V_IN under voltage lock out	V_IN increasing			4.1	4.4	V
V_{IN_UVLO}	V_IN under voltage lock out	V_IN decreasing		3.3	3.6		V
OUTPUT VOLTAGE (VOUT)
V_OUT	Output voltage	Over I_OUT range	TPSM84203		3.3		V
			TPSM84205		5.0		V
			TPSM84212		12.0		V
	Set-point voltage tolerance	T_A = 25°C, I_OUT = 0 A		–3%		+3%
	Temperature variation⁽²⁾	–40°C ≤ T_A ≤ 85°C, I_OUT = 0 A			0.4%
	Line regulation	Over V_IN range, I_OUT = 1 A			0.4%
	Load regulation	Over I_OUT range			0.5%
	Output voltage ripple	20 MHz bandwidth, peak-to-peak, I_OUT> 500 mA			15		mV
OUTPUT CURRENT
I_OUT	Output current	See SOA graph for derating over temperature.		0		1.5	A
I_OUT	Overcurrent threshold				3.1		A
PERFORMANCE
ƞ	Efficiency⁽³⁾	V_IN = 5 V, I_OUT = 1 A	V_OUT = 3.3 V		92%
		V_IN = 12 V, I_OUT = 1 A	V_OUT = 3.3 V		91%
		V_IN = 12 V, I_OUT = 1 A	V_OUT = 5.0 V		92%
		V_IN = 24 V, I_OUT = 1 A	V_OUT = 3.3 V		87%
			V_OUT = 5.0 V		90%
			V_OUT = 12.0 V		94%
	Transient response⁽²⁾	1 A/µs load step, 25% to 75% IOUT(max), COUT= 94 µF	V_OUT over/undershoot		4%		V_OUT
	Transient response⁽²⁾	1 A/µs load step, 25% to 75% IOUT(max), COUT= 94 µF	Recovery time		100		µs
SOFT START
T_SS	Internal soft start time⁽²⁾				5		ms
THERMAL SHUTDOWN
	Rising threshold⁽²⁾				165		°C
	Hysteresis⁽²⁾				10		°C
CAPACITANCE
C_IN	External input capacitance	Ceramic type		10			µF
C_IN	External input capacitance	Non-ceramic type		0	100		µF
C_OUT	External output capacitance	Ceramic type	TPSM84203	94		470	µF
			TPSM84205	94		470	µF
			TPSM84212	47		470	µF
		Total output capacitance		0		500⁽⁴⁾	µF
		Equivalent series resistance (ESR)				35	mΩ

(1) The minimum input voltage is the lowest ensured voltage that will produce the nominal output voltage. See the Drop-Out Voltage section for information on drop-out voltage.

(2) Specified by design. Not production tested.

(3) See the efficiency graphs in the Typical Characteristics section for efficiency over the entire load range.

(4) The maximum output capacitance of 500 μF includes the combination of both ceramic and non-ceramic capacitors.